Note: Make sure that you do not use the True Color display representation and the Model display representation of an AEC polygon simultaneously in one view. The Interior Fill and Edge Fill components of the Model display representation would be drawn on top of the Interior Fill and Edge Fill components of the True Color display representation. It is recommended that you create separate views for regular viewing and True Color renderings.
- Double-click the AEC polygon you want to change.
- On the Properties palette, Display tab, under General, do the following:
- For Display component, verify that *NONE* is selected.
- For Display controlled by, select This object.
- For Display representation, select True Color.
- For Display representation, select True Color. Note: The True Color display representation is not turned on for any display sets by default. If it is not included on the drop-down list, click
. 
Expand Representations by Object AEC Polygon, and then select the display set for the current display configuration and any others for which you want this display representation turned on. - If necessary, expand Object Display Properties Advanced, and click
next to Fill properties. - Specify the fill properties:
If you want… Then… a True Color fill for the outer part of the AEC polygon in the Exterior panel, select Edge Fill, and then select a color for Edge Color, or click Other to choose a different color. a True Color fill for the inner part of the AEC polygon in the Interior panel, select Interior Fill, and then select a color for Interior Color, or click Other to choose a different color. Note: If the edge dimensions of the AEC polygon are set to 0, the edge fill is not displayed.