IGraphObjectManager Class Reference

Represents an instance of a schematic view window and provides methods for adding nodes and node pointers, refreshing the schematic view, accessing filter bits and updating and controlling the various editors within 3ds Max in ways that are not surfaced in the general interface. More...

#include <svcore.h>

Inheritance diagram for IGraphObjectManager:

Public Member Functions
virtual void	PushLevel (Animatable *anim, int id=SV_NO_ID)=0
	Push a level onto the animatable ownership stack.
virtual void	PopLevel ()=0
	Pops a level off the animatable ownership stack.
virtual SvGraphNodeReference	AddAnimatable (Animatable *anim, Animatable *owner, int id, DWORD flags=0)=0
	Adds an Animatable to the schematic view.
virtual IGraphRef *	AddReference (IGraphNode *maker, IGraphNode *target, SvReferenceType type)=0
	This method adds a reference from the specified "maker" node to the specified "target" node.
virtual IGraphRef *	AddRelationship (IGraphNode *maker, Animatable *target, int id, SvRelationshipType type)=0
	This method adds a relationship from the specified "maker" node to the specified "target" node.
virtual void	SvEditSelectedNodeProperties ()=0
	Pops up the property editor dialog on the selected nodes in the schematic view.
virtual void	SvSelectInMaterialEditor (IGraphNode *gNode)=0
	Selects the given node in the material editor.
virtual void	SvSetCurEditObject (IGraphNode *gNode)=0
	Selects the given node in the modifier panel.
virtual bool	SvIsCurEditObject (IGraphNode *gNode)=0
	Returns true if the given node is current in the modifier panel.
virtual bool	ApplyModifier (IGraphNode *gModNode, IGraphNode *gParentNode)=0
virtual bool	DeleteModifier (IGraphNode *gNode)=0
virtual bool	ApplyController (IGraphNode *gSrcNode, IGraphNode *gDestNode)=0
	Invokes the copy/instance controller dialog within schematic view.
virtual void	SvInvalidateView ()=0
	Invalidates the schematic view window.
virtual void	SvInvalidateNode (IGraphNode *gNode)=0
	Invalidates a node in the schematic view window.
virtual void	SvUpdateMaterialEditor ()=0
	Forces the material editor to update.
virtual void	SvUpdateModifierPanel ()=0
	Forces the modifier panel to update.
virtual void	SetFilter (DWORD mask)=0
	Sets the specified filter bits.
virtual void	ClearFilter (DWORD mask)=0
	Clears the specified filter bits.
virtual bool	TestFilter (DWORD mask)=0
	Tets the specified filter bits.
virtual COLORREF	SvGetUIColor (int colorIndex)=0
	Get a SV UI color given a color index.
virtual HWND	GetHWnd ()=0
	Get HWnd for Schematic View window.

Additional Inherited Members
Static Public Member Functions inherited from MaxHeapOperators
static UtilExport void *	operator new (size_t size)
	Standard new operator used to allocate objects If there is insufficient memory, an exception will be thrown.
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e)
	Standard new operator used to allocate objects if there is insufficient memory, NULL will be returned.
static UtilExport void *	operator new (size_t size, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, an exception will be thrown.
static UtilExport void *	operator new (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate objects that takes the type of memory, filename and line number where the new was called If there is insufficient memory, an exception will be thrown.
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, NULL will be returned.
static UtilExport void *	operator new (size_t size, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, an exception will be thrown.
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, NULL will be returned.
static UtilExport void *	operator new[] (size_t size)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown.
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned.
static UtilExport void *	operator new[] (size_t size, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown.
static UtilExport void *	operator new[] (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate arrays of objects.
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned.
static UtilExport void *	operator new[] (size_t size, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown.
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned.
static UtilExport void	operator delete (void *ptr)
	Standard delete operator used to deallocate an object If the pointer is invalid, an exception will be thrown.
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an object If the pointer is invalid, nothing will happen.
static UtilExport void	operator delete (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown.
static UtilExport void	operator delete (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an object that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown.
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen.
static UtilExport void	operator delete (void *ptr, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown.
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, nothing will happen.
static UtilExport void	operator delete[] (void *ptr)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, an exception will be thrown.
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, nothing will happen.
static UtilExport void	operator delete[] (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown.
static UtilExport void	operator delete[] (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown.
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen.
static UtilExport void	operator delete[] (void *ptr, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown.
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown.
static UtilExport void *	operator new (size_t size, void *placement_ptr)
	Placement new operator.
static UtilExport void	operator delete (void *ptr, void *placement_ptr)
	Placement delete operator.
static UtilExport void *	aligned_malloc (size_t size, size_t alignment)
	Allocates memory on a specified alignment boundary.
static UtilExport void *	aligned_realloc (void *ptr, size_t size, size_t alignment)
	Reallocates memory on a specified alignment boundary.
static UtilExport void	aligned_free (void *ptr)
	Frees a block of memory that was allocated with aligned_malloc/aligned_realloc.

Detailed Description

Represents an instance of a schematic view window and provides methods for adding nodes and node pointers, refreshing the schematic view, accessing filter bits and updating and controlling the various editors within 3ds Max in ways that are not surfaced in the general interface.

See also

IGraphNode, IGraphRef, Animatable

Member Function Documentation

PushLevel()

virtual void PushLevel ( Animatable *  anim, int  id = SV_NO_ID  )

pure virtual

Push a level onto the animatable ownership stack.

During traversal of the Animatable graph via SvTraverseAnimGraph(), this method (along with PopLevel()) should be called appropriately to maintain an ownership stack. This is required by the schematic view when nodes are added to the graph with the SV_DUPLICATE_INSTANCES flag set. Note: In 3ds Max 3.0, SV_DUPLICATE_INSTANCES is always on (i.e., the flag is ignored). Because of this, PushLevel() and PopLevel() should always be called in SvTraverseAnimGraph(). See the sample code in Animatable::SvStdTraverseAnimGraph() for an example of this.

Parameters

anim

This is the Animatable that you are, in all likelihood, about to add to the graph via the AddAnimatable() call.

id

(default to SV_NO_ID) This is also the same "id" you'd pass into AddAnimatable(). The "id" is only required in cases where it's impossible for the schematic view to distinguish between two (or more) children in the tree that have the same Animatable but represent different sub-anims. For example, a box has both its width and height set to the same controller (instanced). In the schematic view, this is still shown in tree form so we need the ID to distinguish between the "width" and "height" children.

PopLevel()

virtual void PopLevel ( )

pure virtual

Pops a level off the animatable ownership stack.

See also

PushLevel()

AddAnimatable()

virtual SvGraphNodeReference AddAnimatable ( Animatable *  anim, Animatable *  owner, int  id, DWORD  flags = 0  )

pure virtual

Adds an Animatable to the schematic view.

Note that "owner" and "id" are actually arbitrary - they are used to provide context for this Animatable. This means that the plug-in developer can set them to any value. They are not used internally by the schematic view except in the "Sv*" methods (which the developer can override). So, when you add an Animatable to the schematic view, you would typically add the owner (parent) Animatable as well as the sub-anim id. This allows you to, for example, easily return the name of the object when queried by the SvGetName() call (whose default implementation is shown below):

MSTR Animatable::SvGetName(IGraphObjectManager *gom, IGraphNode *gNode, bool isBeingEdited)
{
    Animatable *owner;
    int subNum;
    MSTR name;
    owner = gNode->GetOwner();
    subNum = gNode->GetID();
    name = owner->SubAnimName(subNum);
 
    return name;
}

Parameters

anim	Points to the animatable to add.
owner	Points to the owner of "anim" above (typically).
id	When nodes are added to the schematic view via this method this integer is provided. This value is not used internally by the schematic view. Rather, it is available to implementers of the Animatable::Sv*() methods to aid in identifying the node.
flags	This flag is some combination of the bit flags in Flags for AddAnimatable() and SvTravereseAnimGraph()

Returns

A SvGraphNodeReference object.

AddReference()

virtual IGraphRef * AddReference ( IGraphNode *  maker, IGraphNode *  target, SvReferenceType  type  )

pure virtual

This method adds a reference from the specified "maker" node to the specified "target" node.

Parameters

maker	Points to the 'maker' node in schematic view.
target	Points to the 'target' node in schematic view.
type	One of the following enum values: REFTYPE_CHILD REFTYPE_SUBANIM REFTYPE_PLUGIN

Returns

A pointer to an IGraphRef object.

Sample Code:

SvGraphNodeReference Control::SvTraverseAnimGraph(IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
{
    int i;
    SvGraphNodeReference nodeRef;
    SvGraphNodeReference childNodeRef;
 
//
// Test filter to see if "Controllers" are active.
// Bail out if they're off (being filtered out)...
//
    if (!gom->TestFilter(SV_FILTER_CONTROLLERS))
        return SvGraphNodeReference();
 
//
// Push this level in the tree. Note that the sub-anim id is passed
// in here because it's possible that the same instance of this control
// may exist in multiple tracks of "owner".
//
    gom->PushLevel(this, id);
 
//
// Some flags are set here pertaining to the control being added.
// Note that the flags are also propagated down the tree
// by passing them on to SubAnim(i)->SvTraverseAnimGraph(gom, this, i, flags);
// SV_DUPLICATE_INSTANCES tells the schematic view not to
// represent multiple instances with a single node. Instead they
// are represented by multiple nodes in the schematic view
// with the "triangle thingy" attached to the side to indicate
// shared instances. This flag is ignored in R3 because
// this mode of operation is globally enabled
// SV_INITIALLY_HIDDEN tells the schematic view that this
// control's node is to be initially displayed in the closed state.
// Note that this has no effect if the node already exists
// in the graph -- it only applies to newly added nodes.
//
    flags |= SV_DUPLICATE_INSTANCES | SV_INITIALLY_HIDDEN;
 
//
// The control is added to the schematic view...
//
    nodeRef = gom->AddAnimatable(this, owner, id, flags);
    if (nodeRef.stat == SVT_PROCEED) {
//
// This control's sub-anims are iterated over...
//
        int numSubs = NumSubs();
        for (i = 0; i < numSubs; i++) {
            if (Animatable* subAnim = SubAnim(i)) {
//
// SvTraverseAnimGraph() is recursively called to add this sub-anim (and all its descendants) to the graph...
//
                childNodeRef = subAnim->SvTraverseAnimGraph(gom, this, i, flags);
 
//
// Now a link (node pointer) is created in the schematic between the control (nodeRef.gNode) and its child sub-anim (childNodeRef.gNode)....
//
                if (childNodeRef.stat != SVT_DO_NOT_PROCEED)
                    gom->AddReference(nodeRef.gNode, childNodeRef.gNode, REFTYPE_SUBANIM);
            }
        }
    }
 
//
// The tree level is popped. Note: a PopLevel() call must always be paired with a PushLevel() call!
//
    gom->PopLevel();
 
    return nodeRef;
}

AddRelationship()

virtual IGraphRef * AddRelationship ( IGraphNode *  maker, Animatable *  target, int  id, SvRelationshipType  type  )

pure virtual

This method adds a relationship from the specified "maker" node to the specified "target" node.

Parameters

maker	Points to the 'maker' node in schematic view.
target	Points to the 'target' node in schematic view.
id	An arbitrary ID that the Animatable can use later to identify itself.
type	the type of the relationship

Returns

A pointer to an IGraphRef object.

SvEditSelectedNodeProperties()

virtual void SvEditSelectedNodeProperties ( )

pure virtual

Pops up the property editor dialog on the selected nodes in the schematic view.

SvSelectInMaterialEditor()

virtual void SvSelectInMaterialEditor ( IGraphNode *  gNode )

pure virtual

Selects the given node in the material editor.

Does nothing if "gNode" does not represent a material or map.

Parameters

gNode

Points to the node in schematic view.

SvSetCurEditObject()

virtual void SvSetCurEditObject ( IGraphNode *  gNode )

pure virtual

Selects the given node in the modifier panel.

Does nothing if "gNode" does not represent an object.

Parameters

gNode

Points to the node in schematic view.

SvIsCurEditObject()

virtual bool SvIsCurEditObject ( IGraphNode *  gNode )

pure virtual

Returns true if the given node is current in the modifier panel.

ApplyModifier()

virtual bool ApplyModifier ( IGraphNode *  gModNode, IGraphNode *  gParentNode  )

pure virtual

DeleteModifier()

virtual bool DeleteModifier ( IGraphNode *  gNode )

pure virtual

ApplyController()

virtual bool ApplyController ( IGraphNode *  gSrcNode, IGraphNode *  gDestNode  )

pure virtual

Invokes the copy/instance controller dialog within schematic view.

The controller referenced by gSrcNode will be either copied or instanced into gDestNode. This is typically called from within a link callback:

bool myControl::SvLinkChild(IGraphObjectManager *gom, IGraphNode *gNodeThis, IGraphNode *gNodeChild)
{
    if( SvCanConcludeLink( gom, gNodeThis, gNodeChild ) )
        return gom->ApplyController(gNodeChild, gNodeThis);
 
    return false;
}

Parameters

gSrcNode	The node that supplies the Matrix3 controller to apply.
gDestNode	The node to apply the controller to.

Returns

true if the controller is successfully applied, false if not.

SvInvalidateView()

virtual void SvInvalidateView ( )

pure virtual

Invalidates the schematic view window.

SvInvalidateNode()

virtual void SvInvalidateNode ( IGraphNode *  gNode )

pure virtual

Invalidates a node in the schematic view window.

Parameters

gNode

- Points to the node in schematic view.

SvUpdateMaterialEditor()

virtual void SvUpdateMaterialEditor ( )

pure virtual

Forces the material editor to update.

SvUpdateModifierPanel()

virtual void SvUpdateModifierPanel ( )

pure virtual

Forces the modifier panel to update.

SetFilter()

virtual void SetFilter ( DWORD  mask )

pure virtual

Sets the specified filter bits.

Parameters

mask	See Schematic View Filter bits

ClearFilter()

virtual void ClearFilter ( DWORD  mask )

pure virtual

Clears the specified filter bits.

Parameters

mask	See Schematic View Filter bits

TestFilter()

virtual bool TestFilter ( DWORD  mask )

pure virtual

Tets the specified filter bits.

Returns true if set; otherwise false.

Parameters

mask	See Schematic View Filter bits

SvGetUIColor()

virtual COLORREF SvGetUIColor ( int  colorIndex )

pure virtual

Get a SV UI color given a color index.

GetHWnd()

virtual HWND GetHWnd ( )

pure virtual

Get HWnd for Schematic View window.