Creates rotated linear dimensions.
Find
Summary
This command is a shortcut to the Linear 
Rotated option of the AMPOWERDIM command. It measures the distance between two points in a direction that is at an angle to a line connecting the two points.
List of Prompts
The following prompts are displayed.
- Angle of dimension line
- Specifies how far to rotate the dimension line.
- First extension line origin
- Specifies the first point that defines the rotated linear dimension (1 in the illustration).
- Second extension line origin
- Specifies the second point that the rotated linear dimension (2 in the illustration).
- Dimension line location
- Specifies where to place the dimension line. The dimension line moves only in the direction perpendicular to the specified angle (3 in the illustration).
- Rotated
- Sets the dimension type to rotated linear dimensions.
- Angle of dimension line - Specifies how far to rotate the dimension line.
- First extension line origin - Specifies the first point that defines the rotated linear dimension (1 in the illustration).
- Second extension line origin - Specifies the second point that the rotated linear dimension (2 in the illustration).
- Dimension line location - Specifies where to place the dimension line. The dimension line moves only in the direction perpendicular to the specified angle (3 in the illustration).
- Placement options
- Provides options to override the default distance snap settings.
- Select object - Specifies an object to use as the base for the distance snap calculation.
- Options - Displays a dialog box, which enables you to override the snap distance or turns distance snap on or off, temporarily.
- Options
-
Displays the Power Dimension Options dialog box enabling you to pre-configure options for this command session.
Note: This option is visible in the command line only if the AMPOWERDIMEDITOR system variable is set to 0 or the ribbon is turned off.