Move the simulated probe to a specified position in the CAD view.
If the document is connected to a measuring device, the device's probe is also moved to the same position.
Note: The
Target Points area is available only when creating inspections for CNC and OMV machines.
- In the Machine tab, click the
Target Point area.
- Choose an entry in the list to specify the coordinate system you want to use. Select:
- CMM Probe Tip Coordinates to specify the target coordinates relative to the position of the probe tip.
- CAD Coordinates to specify the target coordinates relative to the
PCS (CAD Datum).
Note: The coordinate-system list is not displayed when <no measure> is selected in the
Active Measure list.
- To display the current position of the probe, click
. The position is displayed in the
X,
Y, and
Z
boxes.
- Choose the method with which you want to specify the position of the target point:
- Select the mode
button to specify the position relative to the origin of the coordinate system. The button changes to
.
- Deselect the mode
button to specify the position relative to the probe's current position. The button changes to
.
- Enter the point's coordinates in the
X,
Y, and
Z boxes.
- Click
to move the probe to the target point; click
to halt the probe movement.