Change a Tee to a Cross for Conduit

To upgrade a tee to a cross, you must first add conduit to one side of the tee.

Video: Place Parallel Conduit

1. Select the tee you want to upgrade.
2. Right-click the conduit control and click Draw Conduit.
3. Draw a length of conduit.
4. Press ESC twice.
5. Select the tee again.
6. Click the plus symbol (+) next to the fitting.

   The elbow is changed to a cross.

7. To change the cross back to a tee, click the minus symbol (-) next to the fitting.