Modify instance properties of a sub-division of a toposolid to change material, offset, and contour display.
To change instance properties, select the element and change its properties on the Properties palette.
| Name | Description |
|---|---|
| Sub-division | |
| Material | Sets the sub-division material type. |
| Sub-divide height | Specifies the offset of the top of the sub-division relative to the surface of the parent toposolid. Value must be positive. |
| Inherit Contours | Select to display contours on the sub-division. |
| Dimensions | |
| Slope | Not used |
| Perimeter | The perimeter of the sub-division. This is a read-only value. |
| Area | The area of the sub-division. This is a read-only value. |
| Volume | The volume of the sub-division. This is a read-only value. |
| Elevation at Top |
Indicates the elevation used for tagging the top of the sub-division. This is a read-only parameter that reports Varies for sloped planes. |
| Elevation at Bottom |
Indicates the elevation used for tagging the bottom of the sub-division. This is a read-only parameter that reports Varies for sloped planes. |
| Identity Data | |
| Image | Image file associated to the sub-division. |
| Comments | Specific comments related to the sub-division that are not already defined in the description or type comments. |
| Name | User defined element name. |
| Mark | A user-specified label for the sub-division. Possible use: shop mark. This value must be unique for each element in a model. Revit warns you when the number value is already used but allows you to continue using it. You can see the warning using the Review Warnings tool. See Reviewing Warning Messages. |
| Phasing | |
| Phase Created | The phase when the sub-division was created. See Project Phasing. |
| Phase Demolished | The phase when the sub-division was demolished. See Project Phasing. |
| IFC parameters | |
| Export to IFC | Define how the element is exported to an IFC file. |
| Export to IFC As | IFC entity used by the element in an IFC export. |
| IFC Predefined Type | IFC predefined type used by the entity in an IFC export |
| IFC GUID | GUID used by the entity when exported to IFC. |