Damage Receptor Results Data Fields

Results fields are displayed on the Damage Receptor Property Sheet while viewing a replay of a simulation.

Note: To view all data relating to this object, use the Object Properties Window. These data fields are read-only in ICMLive Operator Client. Network objects are configured in InfoWorks ICM Ultimate and ICMLive Configuration Manager. Please refer to the InfoWorks ICM help for more details.

Database Table Name: __IWR_DamageReceptor

Field Name	Help Text	Units	Attribute
Max depth 2D	Maximum depth of water in 2D elements associated with Damage Receptor. (Displayed when hydraulic results are loaded in the GeoPlan.)	Y	DEPTH2D
Flood duration	Number of hours over which depth in any of the 2D elements associated with the Damage Receptor exceeds inundation threshold specified in the Advanced tab of the 2D Parameters Dialog. Note: The Damage calculation timestep multiplier in the 2D Parameters Dialog can be used to control the timestep at which flood duration results are calculated. (Displayed when hydraulic results are loaded in the GeoPlan.)	HOURS	FLOODDURATION
Max level	Maximum elevation in 2D elements associated with Damage Receptor A blank field indicates no inundation. (Displayed when hydraulic results are loaded in the GeoPlan.)	Z	MAXLEVEL2D
Max speed	Maximum velocity of water in 2D elements associated with Damage Receptor. (Displayed when hydraulic results are loaded in the GeoPlan.)	V	SPEED2D
Max unit flow	Maximum unit flow in 2D elements associated with Damage Receptor. (Displayed when hydraulic results are loaded in the GeoPlan.)	UQ	MAXUNITFLOW2D
Floor level	Damage Receptor floor level A blank field indicates that a floor level has not been specified for the Damage Receptor. (Displayed when hydraulic results are loaded in the GeoPlan.)	Z	FLOORLEVEL
Max depth	Maximum depth at Damage Receptor taking floor level into account: A blank field indicates that depth did not exceed inundation threshold, (specified in the Advanced tab of the 2D Parameters Dialog), at any of the 2D elements associated with the Damage Receptor. If Floor level is not specified, the maximum depth at the Damage Receptor is the largest of the maximum depth values of the 2D elements associated with the Damage Receptor. If Floor level is specified, an effective maximum depth is calculated at each element associated with the Damage Receptor. For each element, the effective maximum depth is the smaller of: maximum depth above element ground level maximum depth above Damage Receptor floor level The maximum depth for the Damage Receptor is taken as the largest of the effective maximum depth values. Maximum depth at Damage Receptor taking threshold height into account: If a Threshold height has been specified for the Damage Receptor (in the Damage Receptor Data Fields) then this threshold is subtracted from the largest of the effective maximum depth values. (Displayed when hydraulic results are loaded in the GeoPlan.)	Y	MAXDEPTHRISK
Max risk speed	Maximum speed on the elements associated with the Damage Receptor whose depth is above the inundation threshold. A blank field indicates that no elements associated with the Damage Receptor have depths above the inundation threshold. Used with velocity-dependent damage curves only. (Displayed when hydraulic results are loaded in the GeoPlan.)	V	MAXSPEEDRISK
Time to peak inundation	The time from the start of the simulation to the first occurrence of Max depth (MAXDEPTHRISK). (Displayed when risk analysis object results are loaded in the GeoPlan.)	TD	T_PEAK_2D
Annual damage	Annual damage for selected return period. Annual damage is calculated by multiplying the largest of the damage values for the return period by the event probability for that return period. (Displayed when risk analysis object results are loaded in the GeoPlan.)	WN_COST	ANLDMG
Critical duration	Event duration which gives the worst case damage calculation values for selected return period. (Displayed when risk analysis object results are loaded in the GeoPlan.)	MIN	CRITDUR
Depth	Inundation depth for selected return period. (Displayed when risk analysis object results are loaded in the GeoPlan.)	Y	DEPTH
Expected annual damage	Expected annual damage (EAD) at Damage Receptor. (Displayed when risk analysis object results are loaded in the GeoPlan.)	WN_COST	EAD
cmp_<component name>	Damage values for damage function component. (Displayed when risk analysis simulation results are loaded in the GeoPlan.)
Damage	Total damage at Damage Receptor. (Displayed when risk analysis simulation results are loaded in the GeoPlan.)	WN_COST	DAMAGE