CadContours2dParameterValue.getCurveSelections Method

This sample script demonstrates three different methods for feature recognition: one for holes and two for pockets.

The script starts by creating a simple component which is then used to demonstrate the three methods. After the features are recognised they are coloured and milling and drilling operations are created for each feature.

RecognizedHoleGroup returns a list of BRepFaces that can be used as selections for the drilling operation. RecognizedPocket and PocketRecognitionSelection do not return BRepFaces, and their output needs additional processing before the output can be used for creating machining operations.

The sample script demonstrates a couple of different methods, including finding the pocket BRepFaces and creating sketches from the recognized pockets.

This script works only if the Manufacturing Extension is active.

This sample script starts by creating a simple component which is then used to describe a milling workflow. It creates a setup, a few operations, pick some tools from a Fusion sample tool library using loops and queries and ends up post-processing the operations out using an NC Program.

When running the sample, it assumes you have an open design containing one or more "panels" oriented flat in the X-Y plane. The script creates a setup and a 2D contour operation with tabs to route the panels from a standard sheet.