Welding symbol reference

In the Welding dialog, you can view or change welding symbols properties for the current drawing in the Drawing workspace in Fusion.

The table below shows the properties included for each standard revision, as well as their order within the Welding dialog.

Name AWS A2.4-1998 AWS A2.4-2012 ISO 2553:2019, ISO 4063:2009 Notes
Arrow Side\Other Side Tabs
Process check check check Selects the weld process.
Weld type check check check Selects the weld type for the joint.
Preparation depth delete delete check Specifies the weld's preparation depth. Inclusion depends on weld type.
Penetration depth delete delete check Specifies the weld's penetration depth. Inclusion depends on weld type.
Small leg check delete delete Specifies the weld's leg size. Inclusion depends on weld type.
Size check check check Specifies the weld's size. Inclusion depends on weld type.
Depth check delete delete Specifies the weld's depth. Inclusion depends on weld type.
Groove depth delete check delete Specifies the weld's groove depth. Inclusion depends on weld type.
Height check delete delete Specifies the weld's height. Inclusion depends on weld type.
Thickness check delete delete Specifies the weld's thickness. Inclusion depends on weld type.
Diameter delete check check Specifies the weld's diameter. Inclusion depends on weld type.
Root Gap delete delete check Specifies the weld's root gap. Inclusion depends on weld type.
Gap check check delete Specifies the weld's gap. Inclusion depends on weld type.
Width delete check check Specifies the weld's width. Inclusion depends on weld type.
Filling depth delete check check Specifies the weld's filling depth. Inclusion depends on weld type.
Angle check check delete Specifies the weld's angle. Inclusion depends on weld type.
Include angle delete delete check Specifies the weld's included angle. Inclusion depends on weld type.
Countersink angle delete check check Specifies the weld's countersink angle. Inclusion depends on weld type.
Test check delete delete Specifies the weld's testing requirement. Inclusion depends on weld type.
Either side check delete delete Specifies the weld's test side. Inclusion depends on weld type.
Brazing check check delete Includes brazing requirements. Inclusion depends on weld type.
Distance delete check check Specifies the weld's distance\extents. Inclusion depends on the selected weld type.
Number check check check Specifies the number of welds required. Inclusion depends on the selected distance.
Length check check check Specifies the length of the weld. Inclusion depends on the selected distance.
Pitch check check delete Specifies the pitch between welds. Inclusion depends on the selected distance.
Spacing check delete check Specifies the spacing between welds. Inclusion depends on the selected distance.
Start point delete delete check Specifies the weld's start point. Inclusion depends on the selected distance.
End point delete delete check Specifies the weld's end point. Inclusion depends on the selected distance.
From to delete delete check Specifies the weld's from point. Inclusion depends on the selected distance.
To from delete delete check Specifies the weld's to point. Inclusion depends on the selected distance.
Contour check check check Specifies the weld's contour.
Method check check delete Specifies the method used to achieve the contour. Inclusion depends on the selected contour.
Tail Tab
Process Notes check check check Specifies welding process or manufacturing instructions and or typical notes.
Closed Note tail check check delete Closes the tail if a reference note is included.
Common properties
Options check check check Specifies all around, field weld and spacer requirements. Inclusion depends on the current standard revision.
Identification line delete delete check Specifies the weld system and identify the sides of the weld. Inclusion depends on the current standard revision.
Stagger check check check Specifies the stagger requirements of the weld. Inclusion depends on the current standard revision.
Flip check check check Flips the side and or the entire welding symbol.
Reset check check check Resets the welding symbol to its default; removes last used values.
Parent page: Geometric tolerancing symbols

Related pages