Create solids with Press Pull

Learn how to use the Press Pull command to create or modify a solid body in Fusion.

1. Click Design > Solid > Modify > Press Pull .

   The Press Pull dialog displays.

2. Select sketch profiles, edges, or faces:

   • Sketch Profile: Extrude a new solid body from the sketch profile.

     The Extrude dialog displays.

   • Edge: Round the edges of the solid body.

     The Fillet dialog displays.

   • Face: Add or remove volume from the solid body.

     The Offset Face dialog displays.

3. Use the manipulator handles to extrude, fillet, or offset geometry, or enter exact values in the dialog.

4. Click OK.

The new or modified solid body displays in the canvas.

Tips

• Hold Ctrl (Windows) or Command (MacOS) to modify the selection set once the chamfer command preview displays on the body in the canvas.
• You can uncheck Tangent Chain if you do not want to include tangentially connected geometry when you select faces.