The SettingsCmdCreateSimpleCorridorSettingsCmdAssemblyInsertion type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | CorridorRegionLockMode | Gets the corridor region lock mode. |
| FrequencyAlongCurves | Gets the corridor station placement frequency along the curve portion of an alignment. |
| FrequencyAlongProfileCurves | Gets the corridor station placement frequency along curve portions of the profile geometry. |
| FrequencyAlongSpirals | Gets the corridor station placement frequency along the spiral portion of an alignment. |
| FrequencyAlongTangents | Gets the corridor station placement frequency along the tangent portion of an alignment. |
| HorizontalGeometryPoints | Gets whether corridor stations are placed at horizontal geometry points. |
| ProfileGeometryPoints | Gets whether corridor stations are placed at profile geometry points. |
| ProfileHighLowPoints | Gets whether assemblies are inserted at the high and low points of the profile geometry. |
| SuperelevationCriticalPoints | Gets whether corridor stations are placed at superelevation critical points. |