The SettingsCmdCreateIntersectionSettingsCmdWideningParameters type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | LinearTransitionType | When Linear is selected as the Transition Type, this option lets you specify the type of linear transition used for the widening: By Length or By Taper Ratio. |
| RadiusofCurve1 | When a curve option is selected as the Transition Type, this option lets you specify the radius for the first curve used in the widening. |
| RadiusofCurve2 | When a curve option is selected as the Transition Type, this option lets you specify the radius for the second curve used in the widening. |
| RadiusOfReverseCurve | When Curve-Curve - Reverse Curve is selected as the Transition Type, this option lets you specify the radius for the first and second curves used in the widening. |
| TaperRation | When By Taper Ratio is selected as the Linear Transition Type, this option lets you specify the ratio of the tapering for the widening. |
| TransitionLength | When By Length is selected as the Linear Transition Type, this option lets you specify the length of the transition for the widening. |
| TransitionType | Specifies the type of transition used for the widening: Linear, Curve-Line-Curve, Curve-Curve -Reverse Curve, or Curve - Reverse Curve. |
| WidenedOffset | Specifies the elevation for the offset alignment that has been widened, at both the entrance to the intersection, and as it exits the intersection. |
| WideningAtIncomingLane | Specifies whether or not to widen the incoming lane as it enters the intersection. |
| WideningAtOutgoingLane | Specifies whether or not to widen the outgoing lane as it exits the intersection. |
| WideningSegmentLength | Specifies the length of the offset alignment that will be widened, at both the entrance to the intersection, and as it exits the intersection. |