Use this dialog box to specify or edit the properties of a setup.
If you are editing the properties of a setup using the Survey tab item view, for more information on the functions available, see Survey Tab Item View.
- Station Point
-
Specifies the station point number for the setup.
Note: If you enter a non-existent station point, you are prompted to create a point and the New Control Point dialog box is displayed from which you can create a new station point. - Backsight Point
-
Specifies the backsight point for the setup. When this column contains a valid entry, the Backsight Direction column displays the calculated backsight direction value and is read-only.
- Backsight Direction
-
Specifies the backsight direction. This field is read-only if the Backsight Point column contains a valid point number.
- Backsight Orientation
-
Specifies the backsight orientation angle for the setup. This is the reference angle for the all angle observations except Face 1 and Face 2 angles.
- Instrument Height
-
Specifies the measured instrument (theodolite) height. This is typically measured from the center of the theodolite optics to the setup point on the ground.
- Instrument Elevation
-
Specifies the instrument elevation.
Note: If the setup point has an elevation, this field is read-only and displays the calculated instrument elevation (setup point elevation plus the instrument height). If the setup point has no elevation, then this column can be used to specify the instrument elevation - Easting
-
Displays the point easting.
- Northing
-
Displays the point northing.
- Longitude
-
Displays the point longitude.
- Latitude
-
Displays the point latitude.
- Setup Equipment Properties
-
Displays the name of the equipment properties for the selected setup. To edit the Setup Equipment Properties, click
to display the Setup Equipment Properties dialog box.