Use this tab to control the display of watersheds.
3D Geometry
- Watershed Display Mode
-
Specifies the watersheds display properties:
- Use Surface Elevation: Displays the watersheds at their actual elevation values.
- Flatten Elevations: Flattens or projects the watersheds to the elevation value specified by the Flatten Watersheds To Elevation property.
- Exaggerate Elevation: Scales the watersheds by the factor specified in the Exaggerate Watersheds By Scale Factor property.
- Flatten Watersheds To Elevation
-
Specifies the elevation used to flatten the watersheds; available only when you set the Watershed Display Mode to Flatten Elevations.
- Exaggerate Watersheds By Scale Factor
-
Specifies the scale factor used to exaggerate the watersheds; available only when you set the Watershed Display Mode to Exaggerate Elevation.
Point Size
Specifies the size and scaling method of the drain target points.
- Watershed Scaling Method
-
Specifies the scaling method, which, in combination with the Watershed Units value, determines the point symbol size:
- Use Drawing Scale: Specifies that the point size is a product of the value specified in the Watershed Units property and the drawing scale. For example, with a 1”=40’ drawing scale, using a Watershed Units value of 0.1 is the equivalent of using Size In Absolute Units with a value of 4’.
- Size Relative To Screen: Specifies that the point symbol size is a percentage of the screen size. The percentage value is specified by the Watershed Units property.
- Size In Absolute Units: The value specified in the Watershed Units property is the absolute point symbol size.
- Watershed Units
-
Specifies the value for the point size.
Surface
- Surface Watershed Label Style
-
Specifies the default watershed label style. Click
to select a style.
Legend
- Watershed Legend Style
-
Specifies the default watershed table (legend) style. Click
to select a style.
Boundary Point, Boundary Segment, Depression, Flat Area, Multi-drain, Multi-drain Notch
The above watershed categories have the following common properties.
- Color
-
Specifies the color of the watershed. Click
to select the color. - Linetype
-
Specifies a linetype for the watershed. Click
to select a linetype. - Use Hatching
-
Specifies whether or not to use a hatch pattern for the watershed.
- Hatch Pattern
-
Specifies the hatch pattern to use for the watershed; available only when you set the Use Hatching parameter mode to True. Click
to open the Hatch Properties dialog box where you can select a hatch pattern. - Draw Drain Target Point
-
Specifies whether or not to display drain target points for the watershed.
Note: For depression watersheds, this setting controls if the bottom points of the depression are displayed. - Drain Target Point Display
-
Specifies the symbology of the drain target point display. Click
to select a drain target point symbol. - Drain Target Point Color
-
Specifies the color of the drain target point. Click
to select a drain target point color. - Draw Drain Target Segment
-
Specifies whether or not to display drain target segments for the watershed.
Note: For depression watersheds, this setting controls if the segments between the bottom points of the depression are displayed. - Drain Target Segment Color
-
Specifies the color of the drain target segment. Click
to select a drain target segment color. - Drain Target Segment Linetype
-
Specifies a linetype for the drain target segment. Click
to select a linetype.