Loft

The Lofted design feature takes a series of curves and fits a surface to them.

To create a solid lofted design feature:

1. Select Construct tab > Solids panel > From Curves > Loft to display the Lofting dialog.
2. Optionally enter a Name for the solid, or leave the default name.
3. Select the type As New Base Solid, As Add, or As Cut.
4. Select the curve name in the Curve list and click the Add button, or click the Pick Curve button and select the curves in the graphics window.
5. If you want to connect the first and last curves, select the Closed option.
6. Click the Preview button to confirm that the surface is correct.
7. If you are working with open curves and surface twists, click the name of the curve in the curve list and click the Reverse Selected Curve button and click Preview again.
8. If you are working with closed curves and surface twists, you may need to change the start point of some of the curves.
9. If you displayed this dialog from the Solid toolbar, you can click Apply to preview the feature as a solid. If the cut is on the wrong side of the curve, click Flip Side to Cut and click Apply again to verify.
10. Click OK.