Measured counter-clockwise, the Start angle determines the starting point of the thread.
|
|
|
Ramp diameter
Start angle
Thread mill feature
Ramp angle offset
Tool
- FeatureCAM Release Notes
- Subscription Benefits
- FeatureCAM Getting Started
- FeatureCAM Help
- To get help with FeatureCAM
- FeatureCAM interface
- Files and documents
- About coordinate systems
- About stock
- About geometry
- About curves
- About surfaces
- About solids
- About Feature Recognition
- About features
- Working with features
- New Feature wizard
- Feature Properties dialog
- Drilling feature attributes
- Milling feature attributes
- Dimensions tab
- Location tab (Milling)
- Strategy tab (Milling)
- Side control tab
- Right Angle Head tab
- Misc. tab
- Wall tab
- Tools tab
- F/S tab
- Coolant tab
- Post Variables tab
- Stepovers tab
- Milling tab (2D Feature Properties dialog)
- Mult. rough diameters
- Output Options dialog
- Curly Corner dialog
- Overriding the depth of cut
- Draft flat scallop height
- Draft radius scallop height
- Last pass overcut % examples
- Lateral overcut % examples
- Mult. finish diameter(s)
- Radius tool scallop height
- Ramp diameter % for thread milling
- Start angle
- Thread mill diagram
- Toolpath corner % (2D)
- Total stock (2D)
- Trochoidal cut slot
- Target horsepower
- Plunge tab
- Toolpaths tab
- 3D milling feature attributes
- Turning feature attributes
- Wire feature attributes
- Specific features
- To change the machining order of features and operations
- To change the tool used to machine an operation
- Working with paste special
- Working with the part library
- Groups and Patterns
- About simulation
- About NC code
- About reports
- About customizing manufacturing
- Multiple fixture documents
- Tombstone machining
- About machine design
- About the Multi-Channel Editor (MCE)
- FeatureCAM Video Library
- XBUILD Help
- PartMaker Release Notes
- PartMaker/SwissCAM Getting Started
- PartMaker Help
- PartMaker ConfigPost User Guide
- Autodesk Installation