The Groove feature is used to machine smaller slots or undercut regions.
You can create a turned Groove feature from dimensions or from a curve. You can create these types of Groove:
- OD dimensioned Groove
- Depth
- Width
- Chamfer
- Angle
- Radius
- ID dimensioned Groove
- Depth
- Width
- Chamfer
- Angle
- Radius
- OD Groove from curve
- ID Groove from curve
When creating a turned Groove feature, FeatureCAM does the following:
- Determines what tool to use.
- Determines feed and speed values based on the material being machined.
The recommended feed and speed values for an operation are displayed on the Feed/speed tab. The recommended feeds and speeds are derived from the Groove column of the turning feed/speed tables.
- Generates a Rough pass, possibly in multiple Z steps depending upon the depth of the feature.
- Generates a Finish pass.