- Access
- On the
Mold Layout tab, click Mold Shrinkage
, or
On the Core/Cavity tab, click Part Shrinkage
.
- Set tab
- Specifies the shrinkage values that you set manually.
- Coordinate System
-
- Mold_CSYS
-
Selects the mold coordinate system.
- Part_CSYS
-
Selects the part coordinate system.
- Specify UCS
-
Selects a user coordinate system.
- Shrink Percentage
-
- Isotropic
-
Select this check box if you want the shrinkage values to be equal in all directions. When the Isotropic check-box is selected, only one of the X, Y, Z fields is available as the shrinkage is the same in all directions.
- X, Y, Z
-
Replace with the following: To describe shrinkage that is different in each of the three principal directions, enter the value in the appropriate field. If you select the Isotropic check-box, only one field is active because the shrinkage is the same in all directions.