You can place fittings from either the Content Center or the active project work space:
- Onto tube and pipe route segments
- On free terminal route points
- Next to existing fittings
- Between connected fittings
- In the background of the graphics window
Segment length must comply with the minimum segment length style once the fitting is placed. The fitting can be incompatible with the route in some other way, such as size and material differences. In that case the insertion is allowed, but you are alerted to the incompatible conditions. The fitting being dropped must also be appropriate for the drop point selected. For example, elbows cannot be dropped on straight segments.
For a placed fitting or a routed fitting for which you have changed the fitting diameter, you can:
- Change its orientation, as well as connection point.
- Change the fitting route point position on straight rigid segments.
- Replace existing fittings.
- Restore original fittings, such as elbows and couplings.
- Delete placed fittings and default couplings. You cannot delete the default directional fittings.