Auto Runner Sketch Reference

Provides tools to create and edit patterns for runner paths. You can select the layout pattern for a runner sketch from a pull-down list, and then define the sketch position. All the parameters for a selected sketch are listed.

Access:
	On the Mold Layout tab, click Auto Runner Sketch.

Type	Balance Select a balance type from the list, and view an image of the sketch in Preview. Pattern Selects a pattern from the list, and view an image of the sketch in Preview.
Placement	Base Point Specifies a point for the auto runner sketch plane, which is through the base point and parallel to the XY plane.
Option	Activate Sketch Edit Activates the sketch environment to display the runner sketch when you click OK.
Preview	Modify the dimensions of the sketch in the table using the image as a guide.

Auto Runner Sketch Reference

Balance

Pattern

Base Point

Activate Sketch Edit

Was this information helpful?