| G3055 | FATAL ERROR: G3055 | WARNING: G3048: REMOVING SINGULAR elemtype ELEMENT id |
| Cause: | The specified element was removed because it was not valid or was highly irregular and the AUTOFIXELEMSING model parameter was set to ON. Note that when the MODLSTAB model parameter is set to ON, AUTOFIXELEMSING is also enabled by default. | |
| Action: | Check the element connectivity and grid point coordinates. Setting the model parameter ELEMGEOMOUT to ON will provide additional information to the Model Results Output File. | |
| Remarks: | See the Autodesk Nastran Solver Reference Manual, Section 5, Parameters section for entry format. |