Description
This .NET class wraps the AcEdSSGet::AcEdSSGetFlags ObjectARX enumeration.
This enumeration contains the flag settings for an entity selection process. The settings are used by methods that add entities to or remove entities from a subSelectionSet.
Visual Basic
Public Enum SelectionFlags Duplicates = 2 FailedPickAuto = &H200 NestedEntities = 4 Normal = 0 PickfirstSet = &H20 PickPoints = 1 PreviousSet = &H40 SinglePick = &H10 SubEntities = 8 SubSelection = &H80 Undo = &H100 End Enum
C#
public enum SelectionFlags { Duplicates = 2, FailedPickAuto = 0x200, NestedEntities = 4, Normal = 0, PickfirstSet = 0x20, PickPoints = 1, PreviousSet = 0x40, SinglePick = 0x10, SubEntities = 8, SubSelection = 0x80, Undo = 0x100 }
Members
| Members | Description |
|---|---|
| Duplicates = 2 | Duplicate selections are allowed. |
| FailedPickAuto = 0x200 | The selection resulted from a missed pick in PICKAUTO mode, AutoCAD will next perform a window or crossing window selection based on the next point picked. |
| NestedEntities = 4 | Nested entities are allowed. |
| Normal = 0 | Standard entity selection. |
| PickfirstSet = 0x20 | Pickfirst set used. |
| PickPoints = 1 | Real pick points are needed. |
| PreviousSet = 0x40 | The previous selection set. |
| SinglePick = 0x10 | Force a single pick. |
| SubEntities = 8 | Subentity selections are requested. |
| SubSelection = 0x80 | When set, indicates that the ":U" option was used in a call to acedSSGet() and that the selection set may contain subentity information. |
| Undo = 0x100 | AutoCAD is undoing a selection operation |