Share
 
 

To Place a Fitting From the Spec Viewer

  1. Click Home tab Part Insertion panel Spec Viewer.
  2. In the Spec Sheet, click to select an elbow (for example, ELL 90 LR).
  3. In the Pipe Spec Viewer, click Insert in Model.
  4. Shift+right-click the drawing area. Click Node.
  5. If the insertion point is not located at the desired port, press Ctrl.
  6. In the drawing area, click to specify an open port on a pipe line.
  7. Click to specify an elbow rotation or press Enter for zero.
  8. Press Enter to finish adding elbows.
Parent topic: Tasks (Piping Components)

Was this information helpful?