Unit default symbol

Returns the default unit for the specified product and category e.g. "m", "in".

RC_PRODUCT_UNIT (Unit category, Product name)

The RC_PRODUCT_UNIT formula syntax has the following arguments:

Unit category

The following categories are available:

Accel
Acceleration
Angle
Angle
AngleLen
Angle length
AreaDistLen
Area distributed on length
BarDiameter
Bar diameter
ConnectionDim
Connection dimensions
Coordinate
Coordinate
CostCurr
Cost currency
CostCurrDivArea
Cost currency divided by area
CostCurrDivLen
Cost currency divided by length
CostCurrTimeMachine
Cost currency divided by machine time
CostCurrDivMass
Cost currency divided by mass
CostCurrDivVol
Cost currency divided by volume
CostCurrDivTimeWork
Cost currency divided by work time
CostTimeMachine
Cost of machine time
CostTimeWork
Cost of work time
CoverChar
Cover characteristic
CrackWidth
Crack width
Displacement
Displacement
DispDistLen
Displacement distributed on length
Elevation
Elevation
Energy
Energy
Flux
Flux
Force
Force
ForceDistLen
Force distributed on length
ForceDistSurf
Force distributed on surface
ForceDistVol
Force distributed on volume
Frequency
Frequency
ImpactRes
Impact response
TempInverse
Inverse temperature
Length
Length
Mass
Mass
MassDens
Mass density
MassDistLen
Mass distributed on length
Moment
Moment
MomentDistAngle
Moment distributed on angle
MomentDistLen
Moment distributed on length
MomentInertia
Moment of inertia
Percent
Percent
PolarAccel
Polar acceleration
PolarFrequency
Polar frequency
PolarSpeed
Polar speed
Power
Power
PowerFlux
Power flux
PowerTime
Power time
Pressure
Pressure
ReinforcementArea
Reinforcement area
ReinforcementAreaDistLen
Reinforcement area distributed on length
Rotation
Rotation
SectionArea
Section area
SectionDiam
Section diameter
SecDimDistLen
Section dimension distributed on length
SectionDim
Section dimensions
SectionModulus
Section modulus
SectionChar
Section properties
Spacing
Spacing
Speed
Speed
Station
Station
Stress
Stress
StructuralVelocity
Structural velocity
StructureDim
Structure dimensions
Surface
Surface
SurfForce
Surface force
Temp
Temperature
TempDelta
Temperature delta
TempGradient
Temperature gradient
Time
Time
Volume
Volume
WarpingConstant
Warping constant
Weight
Weight
WeightDistLen
Weight distributed on length

Note: If you type an argument in the formula manually, enclose the text in quotation marks. You can also select or type a cell address (for example A1) which the data will be loaded from.

Product name

The following products are available:

RSA
Autodesk® Robot™ Structural Analysis Professional

Note: If you type an argument in the formula manually, enclose the text in quotation marks. You can also select or type a cell address (for example A1) which the data will be loaded from.

EXAMPLE

Open the RSA_FORMULAS.rtd and RSA_FORMULAS.xlsx files to get a better understanding of the example below.

Note: The files are located in C:/ProgramData/Autodesk/Examples/Results Connect/RSA.

Formula:

RC_PRODUCT_UNIT("Length","RSA") - returns the default length unit for Autodesk® Robot™ Structural Analysis Professional.