The Wire type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | AssemblyInstanceId |
The id of the assembly instance to which the element belongs.
(Inherited from Element) |
| BoundingBox | Retrieves a box that circumscribes all geometry of the element. (Inherited from Element) |
| Category | Retrieves a Category object that represents the category or sub category in which the
element resides. (Inherited from Element) |
| ConnectorManager | The connector manager of this MEP curve. (Inherited from MEPCurve) |
| CreatedPhaseId |
Id of a Phase at which the Element was created.
(Inherited from Element) |
| DemolishedPhaseId |
Id of a Phase at which the Element was demolished.
(Inherited from Element) |
| DesignOption | Returns the design option to which the element belongs. (Inherited from Element) |
| Diameter | The diameter of the MEP curve. (Inherited from MEPCurve) |
| Document | Returns the Document in which the Element resides. (Inherited from Element) |
| Geometry | Retrieves the geometric representation of the element. (Inherited from Element) |
| GroundConductorNum | The ground conductor number. Its default value is zero after created. |
| GroupId |
The id of the group to which an element belongs.
(Inherited from Element) |
| Height | The height of the MEP curve. (Inherited from MEPCurve) |
| HotConductorNum | The hot conductor number. Its default value is zero after created. |
| Id |
A unique identifier for an Element in an Autodesk Revit project.
(Inherited from Element) |
| IsModifiable |
Identifies if the element is modifiable.
(Inherited from Element) |
| IsTransient |
Indicates whether an element is transient or permanent.
(Inherited from Element) |
| IsValidObject |
Specifies whether the .NET object represents a valid Revit entity.
(Inherited from Element) |
| LevelId |
The id of the level associated with the element.
(Inherited from Element) |
| LevelOffset | The offset of the MEP curve. (Inherited from MEPCurve) |
| Location | This property is used to find the physical location of an element within a project. (Inherited from Element) |
| MEPSystem | The system of the MEP curve. (Inherited from MEPCurve) |
| Name | A human readable name for the Element. (Inherited from Element) |
| NeutralConductorNum | The neutral conductor number. Its default value is zero after created. |
| NumberOfVertices | The number of vertices of the wire, including the start and end point. |
| OwnerViewId |
The id of the view that owns the element.
(Inherited from Element) |
| Parameter[BuiltInParameter] | Retrieves a parameter from the element given a parameter id. (Inherited from Element) |
| Parameter[Definition] | Retrieves a parameter from the element based on its definition. (Inherited from Element) |
| Parameter[Guid] | Retrieves a parameter from the element given a GUID for a shared parameter. (Inherited from Element) |
| Parameters | Retrieves a set containing all of the parameters that are contained within the element. (Inherited from Element) |
| ParametersMap | Retrieves a map containing all of the parameters that are contained within the element. (Inherited from Element) |
| Pinned |
Identifies if the element has been pinned to prevent changes.
(Inherited from Element) |
| ReferenceLevel | The reference level of the MEP curve. (Inherited from MEPCurve) |
| UniqueId |
A stable unique identifier for an element within the document.
(Inherited from Element) |
| VersionGuid |
Get the element version Guid.
(Inherited from Element) |
| ViewSpecific |
Identifies if the element is owned by a view.
(Inherited from Element) |
| Width | The width of the MEP curve. (Inherited from MEPCurve) |
| WiringType | The wiring type(arc or chamfer) for the wire. |
| WorksetId |
Get Id of the Workset which owns the element.
(Inherited from Element) |