In the Fusion Design workspace, you can use the following constraints to constrain 3 D Sketch geometry to other sketch , solid, or surface geometry: Horizontal/Vertical Coincident Tangent Equal Parallel Perpendicular Fix/Unfix Midpoint Concentric Colinear

In the Fusion Design workspace, you can use the following tools to create 3 D Sketch geometry: Line Arc Spline Rectangle Circle Ellipse Point Text Conic Curve

On the 3 D PCB toolbar, click Create PCB Sketch .

Control which sketch profile is used to define the body of the 3 D PCB and define the coordinate system use on the 2 D PCB Canvas in Fusion.

Changes to the sketch or the board design can be pushed directly to the 3 D model.

In the 3 D PCB, you can: Edit the Outline sketch .

Create a Sketch at any point in 3 D space. From the Design workspace, Solid tab, select Create Sketch .

In the Design workspace, click Create > Create Sketch , and use sketch tools to create a 2 D board outline.

Creates a 3 D sketch by intersecting the selected sketch geometry with the selected faces or other sketch geometry.

Use 3 D Sketch to create paths for tubing, sweeps, and lofts, or to create surface edges. 3 D Sketch Manipulator The 3 D Sketch Manipulator lets you control where you create sketch geometry in 3 D space.

You then use this sketch to create the 3 D PCB. 3 D PCB created from the enclosure.

Learn how to use the Include 3 D Geometry tool to project selected geometry into the active sketch as 3 D sketch geometry in Fusion.

A projected spun profile is created in the active sketch . Include 3 D Geometry The Include 3 D Geometry tool includes edges, work geometry, and sketch curves in the current sketch .

Every 3 D PCB contains a sketch named Outline used to edit the board outline of the PCB.

This layer syncs with the Board Outline Layer in 2 D PCB. In the Electronics workspace, in an open 3 D PCB document, either: In the 3 D PCB workspace, click Create > Edit Board Outline.