Select objects to align . Each workspace (Schematic, 2D PCB, 3D PCB, and Footprint) has specific objects that can be aligned .

Learn how to use the Align tool to reorient and align bodies or components without creating relationships between objects in Fusion.

Learn how to use the Align Balloons command to align balloons on a sheet in the Drawing workspace in Fusion.

Create an aligned dimension by selecting two points On the toolbar, select Dimension > Aligned Dimension .

Use Mesh Align tool to align a mesh body to a plane in Fusion.

Constraint Types Align An Align Constraint positions the components so that their selected geometry are flush, coincident, or concentric with each other.

Text is aligned to the top right border. Text is in the middle of the cell and aligned to the left border.

Drawing > Dimensions > Arrange Dimensions Type Stack: Stacks dimensions above or below the base dimension. Align : Aligns dimensions with the base dimension.

Data members align int ( ALIGN _...) angle real (0.0...359.9) font int (FONT_...) layer int linedistance int mirror int ratio int size int spin int value string x, y int (origin point) Loop members wires() UL_WIRE (see note) See also UL_BOARD, UL_FOOTPRINT, UL_SHEET, UL_SYMBOL Constants FONT_VECTOR vector font FONT_PROPORTIONAL proportional font FONT_FIXED fixed font ALIGN _BOTTOM_LEFT bottom/left aligned ALIGN _BOTTOM_CENTER bottom/center aligned ALIGN _BOTTOM_RIGHT bottom/right aligned ALIGN _CENTER_LEFT center/left aligned ALIGN _CENTER centered ALIGN _CENTER_RIGHT center/right aligned ALIGN _TOP_LEFT top/left aligned ALIGN _TOP_CENTER top/center aligned ALIGN _TOP_RIGHT top/right aligned Note The wires() loop member always accesses the individual wires the text is composed of when using the vector font, even if the actual font is not FONT_VECTOR.

Quickly align objects using the Align tool.

Align Right: Aligns objects in the pattern to the right of the face, relative to its U direction.

Dimension: Linear Creates a horizontal or vertical dimension. Dimension: Aligned Creates a linear dimension that is aligned with the origin points of the extension lines.

Use Move and Align to position components. There are different workflows when you want to position bodies and components.

Text is centered and aligned to the bottom border. Text is aligned to the bottom right border.

Learn how to use the Arrange Dimensions tool to stack or align linear or angular dimensions in the Drawing workspace in Fusion.