Convert The Convert tool converts different bodies from one type to another. BRep (solid or surface) faces to T-Spline faces T-Spline body to BRep body Quad mesh body to T-Spline body BRep faces, T-Spline bodies, or Mesh bodies can be filtered for selection.

Learn how to use the Project To Surface tool to project selected sketch objects to selected BRep faces. in Fusion. Design > Sketch > Create > Project/Include > Project to Surface In the Design workspace, on the Sketch contextual tab, select Create > Project/Include > Project To Surface.

Star points also determine how a T-Spline will be converted to BREP . When a T-Spline is converted to BREP , it will split into separate surfaces at each star point.

This video shows how to handle errors when converting T-Spline bodies to BREP bodies. You may encounter errors when converting T-Spline bodies to BRep bodies.

Selection Filter Set to BRep Face for BRep to T-Spline conversion.

For large mesh bodies, you can get a more accurate boundary if you convert the mesh body to BREP or T-spline. After converting the mesh body, you can project a sketch onto the BREP and use more types of geometry selections.

Creates a 3D sketch by projecting selected sketch objects to selected BRep faces. Design > Sketch > Create > Project/Include > Project to Surface Faces Select the surface to project to.

Edit Face creates T-Spline faces, edges, and vertices on the selected BRep face. Design > Modify > Edit Face Note: Available in Direct Modeling Mode only.

Bad topology often prevents the T-Spline body from converting to a BREP body. Use box display or control frame display to manage topology.

Project to Surface - creates a 3D sketch by projecting 2D sketch objects to BRep faces. Intersection Curve - intersects 2D sketch geometry with faces or other 2D sketch geometry, to create a 3D sketch.

Project to Surface Creates a 3D sketch by projecting 2D sketch objects to BRep faces. Intersection Curve Intersects 2D sketch geometry with faces or other 2D sketch geometry, to create a 3D sketch.

Hey guys, i can't select the mesh when i try to convert it to brep . What am i doing wrong? @TrippyLighting wrote: In order to do that with this sketch I would have to trim out the bottom of the ellipse.

Hey guys, i can't select the mesh when i try to convert it to brep . What am i doing wrong? @TrippyLighting wrote: In order to do that with this sketch I would have to trim out the bottom of the ellipse.

I have created a few surfaces with the TemporaryBRepManager that I would like to turn into a temporary BRep Solid. They form a watertight volume.

I have created a few surfaces with the TemporaryBRepManager that I would like to turn into a temporary BRep Solid. They form a watertight volume.