Design > Solid > Create > Emboss Sketch Profiles Select sketch profiles to emboss on a solid body.

Learn how to use the Emboss tool to emboss or deboss a solid body with sketch profiles in Fusion.

You can create setting presets in the following tools: Extrude Rib Web Boss Snap Fit Emboss Thicken Shell Draft

Physical values Thickness, Draft Angle and Nominal Radius, which are referenced as parameters and used by modeling tools such as Extrude, Rib, Web, Boss, Snap Fit, Emboss , Thicken, Shell, Draft. Design Advice values Thickness Range, Thickness Variation, Minimum Draft Angle, Knife Edge Threshold.

Note: If you plan to use the Emboss tool to emboss text on a solid body, select a font that is not a single line font.

Note: If you plan to use the Emboss tool to emboss text on a solid body, select a font that is not a single line font.

Tips If you plan to use the Emboss tool to emboss text on a solid body, select a font that is not a single line font.

You select an open sketch profile, then specify the thickness. Emboss The Emboss tool raises or recesses a sketch profile relative to faces on a solid body by a specified depth and direction.

Examples of potentially unnecessary features are embossed or raised part numbers and fillets on external corners.

Label imprint and emboss features (such as part numbers or knurling) Small protrusions (such as a timing mark).

Design > Solid > Create The following Create tools for solid bodies are available in Edit In Place: tool Associative Non-Associative New Component Create Sketch Create Form Extrude Revolve Sweep Loft Rib Web Emboss Hole Thread Box Sphere Cylinder Torus Coil Pipe Rectangular Pattern Circular Pattern Mirror Thicken Boundary Fill Note: Embedded Analysis for Sweep and Loft is unavailable in Edit In Place.

Trying to emboss matching brick pattern on underside of arch.

I'm trying to learn fusion 360 but i am stuck on one thing, the guy in the youtube clip are able to emboss but i just can't. I have tried to go back in timeline and find the problem, search for others emboss issues in the community.

I'm trying to learn fusion 360 but i am stuck on one thing, the guy in the youtube clip are able to emboss but i just can't. I have tried to go back in timeline and find the problem, search for others emboss issues in the community.

I am a beginner in CAD modeling and I stuck a bit with emboss feature, what will be a better solution?