If Fusion is installed on a Mac, install the Machine Connector application on a Windows computer, and then establish a network connection between the two.

For the next video about live part alignment, see Workflow: Performing a live part alignment using probing. Install a Machine Connector application from within Fusion If you are using a CNC machine from the Fusion Library, download and install a Machine Connector application from within Fusion and then link it to the CNC machine.

Use this document as a guide to collect Diagnostic Logs by following each topic and the steps as shown. Configure the Diagnostic Mode Start and configure the Diagnostics Mode before creating log files and use the Verbose logging option to gather detailed error reports: Right-click the tray icon.

Refer to the section below Configuring your Network for Desktop Connector Configuring your Network for Desktop Connector Please find below the recommended Autodesk guidance for the full list of URL, URI, and Domains.

Make sure that there is enough disk space (at least 935 MB) to install Autodesk Desktop Connector. Restart the installation .

If group policies are configured in a way to run products elevated.

Configuration required: You must configure the SyncRootManager registry value.

To avoid these errors after installing Desktop Connector 16.x, Edit all Cloud Drive mappings (Docs & Fusion) in the Vault Client: Go to Tools > Administration > Vault Settings > Collaborate > Configure Select a mapping and choose Edit Update the “Cloud Drive folder” to point to the new workspace location Note: This may automatically get updated upon editing, be sure to click Ok when exiting the dialog.

Refer to Install Walk-Through for Version 16.9 and Above and Install Walk-Through for Version 16.8 and Below for specific installation instructions.

Resolved an issue where a Configured Design sometimes linked to the Configuration Table of a different Configured Design after using the “Get All Latest” operation.

Currently, there is no way for Desktop Connector to automatically set custom properties in the view during installation . However, you can manually configure these settings using Windows File Explorer View options.

Export and send to an installed 3D printing application On the Design workspace toolbar, click Utilities > Make > 3D Print .

With this error message it should be possible to install missing or update expired certificates and make the connection work this way.

How to install and configure the Autodesk Network License Manager.

You are unable to install or run Fusion 360 within an environment using Proxy-Auto- Configure (pac) scripts.