Steps: If you haven't already created a 2D PCB for the enclosure, in the Design workspace, using tools on the the Solid toolbar, sketch the circuit board geometry in your model enclosure.

In this activity, you open the bottom half of the enclosure and sketch the outline of the printed circuit board and mounting holes. You then use this sketch to create the 3D PCB . 3D PCB created from the enclosure.

In this activity, you create a 2D PCB based on the circuit board schematic and the 3D PCB you created in Activity 1.

Steps In SmartMeter schematic design of SmarttMeter project, click Design > Switch > Switch to PCB document. The SmartMeter PCB design tab opens.

Display pad names show pad names in 2D PCB or 3D PCB documents. Default: off.

In this tutorial, you: Defined the PCB shape. Placed components on circuit board .

When you work with electronics in Fusion, you can integrate a printed circuit board ( PCB ) with mechanical assemblies.

With the circuit board open in the canvas, on the Simulation toolbar, click Export PCB Data for Ansys .

The electronics design process is split into two distinct design stages, the schematic design, and printed circuit board ( PCB ) layout. The schematic design serves as the logical representation of an electronic circuit.

From an Electronics Design Open your 2D circuit board design that you want to convert into a 3D PCB .

The printed circuit board ( PCB ) layout process is both an art and a science.

One of the areas of collaboration is in the size and shape of the PCB itself. In this tutorial, you: Define the size of the PCB in the Design workspace.

Use splines to define the physical boundaries of a 2D printed circuit board ( PCB ). If a board outline exists, delete it.

Navigate between documents to switch seamlessly between schematic, 2D PCB , and 3D PCB views within a single electronics design.

You can create a 2D printed circuit board ( PCB ) at any time after starting work on the associated schematic.