Machine Inclined Flats option
Fusion Manufacturing Extension
This feature is part of an extension. Extensions are a flexible way to access additional capabilities in Fusion. Learn more.
You can machine flat areas that are inclined at an angle using the Machine Inclined Flats option in the Multi-Axis tab in the Flat finishing dialog.
Flat toolpath machining flat areas only
Flat toolpath machining inclined areas
You can control which inclined areas to machine by using minimum and maximum tilt angles, which are referenced from a Tool Axis Reference.
Note: When Machine Inclined Flats is selected, the entire geometry of the model is considered, meaning you will not be able to confine the toolpath to a specific machining boundary from the Geometry tab.