Review, edit, and create turnouts for use in your drawing in the Turnout Catalog dialog box.
Click Rail tab 
Turnout panel Turnout Catalog
to open the Turnout Catalog dialog box.
Turnout Catalog
- Name
-
Specifies the name of the rail type. This is typically the curve radius, frog ratio, and rail mass of the turnout. For example, 190-1:9 49.
- Description
-
Specifies an optional description for the turnout. The turnout name is used by default.
- Type
-
Specifies the type of turnout. Select Straight-Line Switch, Arc Switch, Symmetrical straight line, Symmetrical curve, or Crossing. The thumbnail in the dialog box changes to represent the selected turnout type.
- R
-
Defines the radius of the turnout declination angle. This dimension is shown in the dialog box thumbnail.
- fi (1:n) / fi (deg)
-
Defines the tangent angles of the turnout declination axis. The angle can be specified as 1:n (such as 1:9) or with a unit of degrees (such as 6.340192).
- d
-
Defines the length of the straight part of the turnout if it is the turnout type with the straight core.
- v
-
Specifies the highest permitted velocity in the declination radius.
- a, b, c, and l
-
Specifies the geometrical data of the hide turnout lengths.
- Rail Type
-
Specifies the standard turnout rail types (such as 49, 54, or 60) or any other user defined types.
- s
-
Defines the rail length at the end of the turnout that encloses the area of extended turnout thresholds.
Add customized turnouts by clicking
.
Delete customized turnouts by clicking
.