MNMesh Class Reference

#include <mnmesh.h>

Class Description

The MNMesh class is provided for temporary use by plug-ins, to help with complex topology-based modifications to Meshes.

It has certain capabilities, such as the ability to recognize faces with more than 3 sides, that are useful in some applications. It is not suitable for use as a pipeline object. All methods of this class are implemented by the system.

MNMesh has a winged-edge structure and a highly interlinked topology. This is very useful for some modifiers, but requires far more memory and processing time than an equivalent normal mesh. It's convenient for the programmer, but may be sluggish for the user.

Although some methods can be a bit slow, none of them are non-linear in the amount of time they take. Even the tessellation algorithms, which can as much as quadruple the size of the meshes, operate locally, vertex by vertex, so they are order-of-n algorithms.

MNMesh derives from FlagUser and supports the flags listed at MNMesh Flags.

See the topic MNMesh Note on Debugging for information about debugging MNMesh.

See also

FlagUser, MNFace, MNVert, MNEdge, MNMap, PerData, MNMeshBorder, Mesh, BitArray, Tab, MNMeshBorder,

Inheritance diagram for MNMesh:

Public Member Functions
DllExport void	FacePointBary (int ff, Point3 &p, Tab< float > &bary)
	Finds "Generalized Barycentric Coordinates" for the point given. More...
DllExport void	FindFaceBaryVector (int face, int vertIndex, Point3 &vector, Tab< float > &tBary)
Constructors and Destructors
	MNMesh ()
	Initializes the MNMesh with no components and the default flags. More...
	MNMesh (const Mesh &from)
	Constructor. More...
	MNMesh (const MNMesh &from)
	Copy constructor. More...
DllExport	~MNMesh ()
	Destructor. More...
Allocation and Initialization Methods
void	DefaultFlags ()
	Clears all flags. More...
DllExport void	Init ()
	The data members are initialized as follows: More...
DllExport void	VAlloc (int num, bool keep=TRUE)
	Allocates and inits the specified number of MNVerts. More...
DllExport void	VShrink (int num=-1)
	Shrinks the nv_alloc size of the MNVert array to the specified size. More...
DllExport void	freeVEdge ()
	Deallocates any MNEdges in the vedg table and sets the vedg pointer to NULL. More...
DllExport void	VEdgeAlloc ()
	Allocates the vedg array. More...
DllExport void	freeVFace ()
	Deallocates the vfac array. More...
DllExport void	VFaceAlloc ()
	Allocates the vfac array. More...
DllExport void	EAlloc (int num, bool keep=TRUE)
	Allocates the MNEdge data array e with the specified size. More...
DllExport void	EShrink (int num=-1)
	Reduces the ne_alloc size of the MNEdge data array e to the specified number of elements. More...
DllExport void	FAlloc (int num, bool keep=TRUE)
	Allocates the MNFace array f with the specified size. More...
DllExport void	FShrink (int num=-1)
	Reduces the nf_alloc size of the MNFace data array f to the specified number of elements. More...
DllExport void	MAlloc (int num, bool keep=TRUE)
	Allocates the MNMap array m with the specified size. More...
DllExport void	MShrink (int num=-1)
	Reduces the nm_alloc size of the MNMap data array m to the specified number of elements. More...
Component Access Functions
int	VNum () const
	Returns the number of vertices. More...
MNVert *	V (int i) const
	Returns a pointer to the i'th MNVert. More...
Point3 &	P (int i) const
	Returns the point in the i'th MNVert. More...
int	ENum () const
	Returns the number of edges. More...
MNEdge *	E (int i) const
	Returns a pointer to the i'th MNEdge. More...
int	FNum () const
	Returns the number of faces. More...
MNFace *	F (int i) const
	Returns a pointer to the i'th MNFace. More...
int	MNum () const
	Internal. More...
DllExport int	TriNum ()
	Number of triangles. More...
Mapping Methods
DllExport MNMap *	M (int mapChannel) const
	This accessor accepts a value in the range -NUM_HIDDENMAPS to MNum(). More...
DllExport void	SetMapNum (int mpnum)
	Allocates and initializes the specified number of MNMap elements in the m array. More...
DllExport void	InitMap (int mapChannel)
	Allocates and initializes basic planar map, or a white map for the vertex color channel. More...
DllExport void	ClearMap (int mapChannel)
	Clears and frees the specified map channel, setting the MN_DEAD flag. More...
DllExport UVVert	MV (int mapChannel, int i) const
	Returns the specified UVVert from the specified mapping channel. More...
DllExport MNMapFace *	MF (int mapChannel, int i) const
	Returns a pointer to the specified MNMapFace from the specified mapping channel. More...
DllExport UVVert	ExtrapolateMapValue (int face, int edge, Point3 &pt, int mapChannel)
	Returns the total number of triangles; this is a sum of the number of triangles in each face that does not have the MN_DEAD flag set. More...
DllExport bool	SeparateMapVerticesInFaceCluster (MNFaceClusters &fclust, int clusterID)
	Detaches the texture vertices on the border edges of the fclust. More...
DllExport bool	IsEdgeMapSeam (int mapChannel, int edge)
	Returns whether an edge is a seam or not. More...
DllExport void	FindEdgeListMapVerts (const Tab< int > &lp, Tab< int > &mv, int mapChannel)
	Returns map verts for both ends of each edge (from f1's perspective) (Very useful for creating new faces at borders.) mv[j*2] is the map vertex corresponding to edge j's v1. More...
Per-Vertex Data
DllExport void	setNumVData (int ct, BOOL keep=FALSE)
	Sets the specified number of vertex data elements. More...
int	VDNum () const
	Returns the number of vertex data channels maintained by this MNMesh. More...
DllExport BOOL	vDataSupport (int vdChannel) const
	Returns TRUE if the specified channel of vertex data is available for this MNMesh; otherwise FALSE. More...
DllExport void	setVDataSupport (int vdChannel, BOOL support=TRUE)
	Sets if the specified channel of vertex data is supported by this MNMesh. More...
void *	vertexData (int vdChannel) const
	Returns a pointer to the vertex data for the specified channel or NULL if the channel is not supported. More...
float *	vertexFloat (int vdChannel) const
	Returns a pointer to the floating point vertex data for the specified channel of this mesh or NULL if the channel is not supported. More...
DllExport void	freeVData (int vdChannel)
	Deletes (deallocates) the vertex data for the specified channel. More...
DllExport void	freeAllVData ()
	Deallocates the vertex data from all channels and sets the number of supported channels to 0. More...
Vertex Weight Methods
float *	getVertexWeights ()
	Returns a pointer to the floating point vertex weight data. More...
void	SupportVertexWeights ()
	Sets the channel support for the vertex weights channel (VDATA_WEIGHT). More...
void	freeVertexWeights ()
	Frees (deallocates) the vertex weight channel data. More...
float *	getVSelectionWeights ()
	Returns a pointer to the floating point vertex selection weight data. More...
void	SupportVSelectionWeights ()
	Sets the channel support for the vertex weights channel (VDATA_SELECT). More...
void	freeVSelectionWeights ()
	Frees (deallocates) the vertex selection weight channel data. More...
Per-Edge Data
DllExport void	setNumEData (int ct, BOOL keep=FALSE)
	Sets the specified number of edge data elements. More...
int	EDNum () const
	Returns the number of edge data channels maintained by this MNMesh. More...
DllExport BOOL	eDataSupport (int edChannel) const
	Returns TRUE if the specified channel of edge data is available for this MNMesh; otherwise FALSE. More...
DllExport void	setEDataSupport (int edChannel, BOOL support=TRUE)
	Sets if the specified channel of edge data is supported by this MNMesh. More...
void *	edgeData (int edChannel) const
	Returns a pointer to the edge data for the specified channel or NULL if the channel is not supported. More...
float *	edgeFloat (int edChannel) const
	Returns a pointer to the floating point edge data for the specified channel of this MNMesh or NULL if the channel is not supported. More...
DllExport void	freeEData (int edChannel)
	Deletes (deallocates) the edge data for the specified channel. More...
DllExport void	freeAllEData ()
	Deallocates the edge data from all channels and sets the number of supported channels to 0. More...
Edge Knot Methods
float *	getEdgeKnots ()
	Returns a pointer to the floating point edge knot data. More...
void	SupportEdgeKnots ()
	Sets the channel support for the edge knot channel (EDATA_KNOT). More...
void	freeEdgeKnots ()
	Frees (deallocates) the edge knot channel data. More...
Vertex Face and Edge Methods
DllExport void	VClear (int vv)
	Clears and frees the flags and face/edge lists for the specified vertex. More...
DllExport void	VInit (int vv)
	Initializes the specified MNVert, clearing its flags and emptying its face & edge lists (if vfac & edg are allocated). More...
DllExport int	VFaceIndex (int vv, int ff, int ee=-1)
	Returns the index of face ff in the vfac[vv] table. More...
DllExport int	VEdgeIndex (int vv, int ee)
	This method is available in release 3.0 and later only. More...
DllExport void	VDeleteEdge (int vv, int ee)
	This method is available in release 3.0 and later only. More...
DllExport void	VDeleteFace (int vv, int ff)
	This method is available in release 3.0 and later only. More...
DllExport void	VReplaceEdge (int vv, int oe, int ne)
	This method is available in release 3.0 and later only. More...
DllExport void	VReplaceFace (int vv, int of, int nf)
	This method is available in release 3.0 and later only. More...
DllExport void	CopyVert (int nv, int ov)
	This method is available in release 3.0 and later only. More...
DllExport void	MNVDebugPrint (int vv)
	This method is available in release 3.0 and later only. More...
Mesh Building Functions
DllExport int	NewTri (int a, int b, int c, DWORD smG=0, MtlID mt=0)
	Creates a new tri-face. More...
DllExport int	NewTri (int *vv, DWORD smG=0, MtlID mt=0)
	Creates a new face of degree 3. More...
DllExport int	NewQuad (int a, int b, int c, int d, DWORD smG=0, MtlID mt=0)
	This method will create a new quad. More...
DllExport int	NewQuad (int *vv, DWORD smG=0, MtlID mt=0)
	This method will create a new quad. More...
DllExport int	NewFace (int initFace, int degg=0, int *vv=NULL, bool *vis=NULL, bool *sel=NULL)
	This method creates a (single) new face with the characteristics given. More...
DllExport int	CreateFace (int degg, int *vv)
	Creates a new face, using the vertices given. More...
DllExport int	AppendNewFaces (int nfnum)
	Appends the specified number of MNFaces to f. More...
DllExport void	setNumFaces (int nfnum)
	Sets the specified number of MNFaces allocated in f. More...
DllExport int	RegisterEdge (int v1, int v2, int leftFace, int fpos)
	Edge creation tool. More...
DllExport int	SimpleNewEdge (int v1, int v2)
	Edge creation tool. More...
DllExport int	NewEdge (int v1, int v2, int leftFace, int fpos)
	Edge creation tool. More...
DllExport int	AppendNewEdges (int nenum)
	Appends the specified number of edges. More...
DllExport void	setNumEdges (int nenum)
	Sets the number of MNEdges allocated in e. More...
DllExport int	NewVert (Point3 &p)
	Creates a new vertex (increasing numv) and sets it to the specified point. More...
DllExport int	NewVert (Point3 &p, int vid)
	This method is available in release 3.0 and later only. More...
DllExport int	NewVert (int vid)
	Creates a new vertex and initializes it to location, flags and other characteristics of vertex vid. More...
DllExport int	NewVert (int v1, int v2, float prop)
	Creates a new vertex which is a linear combination of two existing vertices. More...
DllExport int	AppendNewVerts (int nvnum)
	Appends the specified number of MNVerts. More...
DllExport void	setNumVerts (int nvnum)
	Sets the number of verts, allocating if needed. More...
DllExport int	InsertSpur (int face, int vertIndex, Tab< int > *ptMapVertArray=NULL)
	Creates a spur on the face at vertexIndex. More...
Component Removal Routines
To delete a component set the appropriate MN_XXX_DEAD flags (e.g. MN_EDGE_DEAD) and use following routines. These all have O(N) complexity.
DllExport void	CollapseDeadVerts ()
	Removes all MNVerts with the MN_DEAD flag from the list of vertices. More...
DllExport void	CollapseDeadEdges ()
	Removes all MNEdges with the MN_DEAD flag from the list of edges. More...
DllExport void	CollapseDeadFaces ()
	Removes all MNFaces with the MN_DEAD flag from the list of faces. More...
DllExport void	CollapseDeadStructs ()
	Performs all 5 of the above collapse functions, safely removing all unused components from this mesh. More...
DllExport void	Clear ()
	Reinitializes all verts, faces, and edges, freeing the data members of these components, but not freeing the vertex, edge, and face arrays themselves. More...
DllExport void	ClearAndFree ()
	Deletes everything and frees all relevant memory. More...
DllExport void	freeVerts ()
	Deletes the MNVert array and frees any corresponding vertex data. More...
DllExport void	freeEdges ()
	Deletes the MNEdge array and frees and corresponding edge data. More...
DllExport void	freeFaces ()
	Deletes the MNFace array. More...
DllExport void	freeMap (int mapChannel)
	Deletes the MNMap on the specified map channel. More...
DllExport void	freeMaps ()
	Deletes and frees all the MNMaps. More...
DllExport bool	RemoveVertex (int vertex)
DllExport bool	RemoveSpur (int spur)
DllExport void	DeleteFlaggedFaces (DWORD deathflags, DWORD nvCopyFlags=0x0)
	Deletes faces with any of the death flags set, as well as delete vertices and edges surrounded by faces with death flags, and correct the mesh components remaining. More...
DllExport void	RemoveEdge (int edge)
	Kills the edge and joins the faces on either side. More...
DllExport void	EliminateCollinearVerts ()
	This routine scans through a mesh from which invisible edges have been removed, looking for vertices that essentially seem to lie in the middle of edges. More...
DllExport void	EliminateCoincidentVerts (float thresh=MNEPS)
	This merges vertices that lie extremely close together, similar to what's done in Edit Mesh's Weld function, but it only affects vertices that are joined by an edge. More...
Bulk Flag Clearing and Setting Functions
void	ClearVFlags (DWORD fl)
	Clears all specified flag bits in all MNVerts. More...
void	ClearEFlags (DWORD fl)
	Clears all specified flag bits in all MNEdges. More...
void	ClearFFlags (DWORD fl)
	Clears all specified flag bits in all MNFaces. More...
DllExport void	PaintFaceFlag (int ff, DWORD fl, DWORD fenceflags=0x0)
	Recursively sets flag on given face and all faces connected to it. More...
DllExport int	PropegateComponentFlags (int slTo, DWORD flTo, int slFrom, DWORD flFrom, bool ampersand=FALSE, bool set=TRUE)
	This allows the developer to set flags in one type of component based on what the nearby flags of another type of component are. More...
DllExport void	UpdateBackfacing (GraphicsWindow *gw, bool force)
	Updates the MN_BACKFACING flag in all components based on the specified view. More...
Selection Methods
DllExport void	VertexSelect (const BitArray &vsel)
	Selects or deselects the vertices as specified by on bits in the given bit array. More...
DllExport void	EdgeSelect (const BitArray &esel)
	Selects or deselects the edges as specified by on bits in the given bit array. More...
DllExport void	FaceSelect (const BitArray &fsel)
	Selects or deselects the faces as specified by on bits in the given bit array. More...
bool	getVertexSel (BitArray &vsel)
	Fills the given bit array with the current vertex selection state. More...
bool	getEdgeSel (BitArray &esel)
	Fills the given bit array with the current edge selection state. More...
bool	getFaceSel (BitArray &fsel)
	Fills the given bit array with the current face selection state. More...
DllExport void	SelectEdgeLoop (BitArray &edgeSel)
	Using the current edge selection this returns the original selection and the edge loop defined by those selections. More...
DllExport void	SelectEdgeRing (BitArray &edgeSel)
	Using the current edge selection this returns the original selection and the ring loop defined by those selections. More...
DllExport BitArray	VertexTempSel (DWORD fmask=MN_DEAD|MN_SEL, DWORD fset=MN_SEL)
	Gets the current vertex selection, based on the current selection level. More...
Getting Components by Flag
DllExport bool	getVerticesByFlag (BitArray &vset, DWORD flags, DWORD fmask=0x0)
	Creates a BitArray of all vertices using the specified flags. More...
DllExport bool	getEdgesByFlag (BitArray &eset, DWORD flags, DWORD fmask=0x0)
	Creates a BitArray of all edges using the specified flags. More...
DllExport bool	getFacesByFlag (BitArray &fset, DWORD flags, DWORD fmask=0x0)
	Creates a BitArray of all faces using the specified flags. More...
DllExport void	ElementFromFace (int ff, BitArray &fset)
	Sets bits for all faces in the same "element", or connected component, with face ff. More...
DllExport void	BorderFromEdge (int ee, BitArray &eset)
	Takes a one-sided edge and sets the bits representing this edge's "border". More...
Edge Visibility and Selection Methods
DllExport void	SetEdgeVis (int ee, BOOL vis=TRUE)
	This not only sets the edge's MN_EDGE_INVIS flag, it also sets the visedg state of the faces on either side. More...
DllExport void	SetEdgeSel (int ee, BOOL sel=TRUE)
	This not only sets the edge's MN_SEL flag, it also sets the edgsel state of the faces on either side. More...
Mesh Compatibility Functions
void	SetFromTri (const Mesh &from)
	Clears out all current information, and copies in new faces and vertices from the from argument. More...
DllExport void	AddTri (const Mesh &from)
	Adds vertices and faces in "from" to current MNMesh. More...
DllExport void	OutToTri (Mesh &tmesh)
	Outputs current MNMesh into the mesh given. More...
Mesh Computation Functions
DllExport void	FillInMesh ()
	If this mesh does not have the MN_MESH_FILLED_IN flag, this method completely recomputes all combinatorial information. More...
DllExport void	FillInFaceEdges ()
	Fills in the faces' edge arrays based on the edge list. More...
DllExport void	FillInVertEdgesFaces ()
	Fills in the vertex edge and face lists based on the edge list. More...
DllExport bool	EliminateBadVerts (DWORD flag=0, bool doNullEdgeCheck=true)
	A "bad" vertex in this context is one which is shared between two distinct boundaries for this mesh. More...
DllExport bool	EliminateNullEdges ()
	Eliminates from the mesh any "null" edges, defined as edges with identical start and end vertices. More...
DllExport void	OrderVerts ()
	This routine organizes the face and edge lists of each vertex such that going counterclockwise around the vertex (with the surface normal pointing up), you'll encounter edg[0], fac[0], edg[1], fac[1], etc, ending in either the last face if the vertex is not on a boundary or the last edge if the vertex is on a boundary. More...
DllExport void	OrderVert (int vid)
	This routine organizes the face and edge lists of the specified vertex such that going counterclockwise around the vertex (with the surface normal pointing towards you), you'll encounter edg[0], fac[0], edg[1], fac[1], etc, ending in either the last face if the vertex is not on a boundary or the last edge if the vertex is on a boundary. More...
Mesh Triangulation Routines
DllExport void	Triangulate ()
	Converts a MN_MESH_NONTRI mesh, with polygon faces and possibly hidden vertices, into a completely triangulated mesh, wherein all faces have degree 3. More...
DllExport void	TriangulateFace (int ff)
	Triangulates the specified face, splitting it into as many faces as are needed (deg-2+hdeg*2) to represent all the triangles. More...
DllExport int	DivideFace (int ff, Tab< float > &bary)
	Divides a face by creating a point in the face's interior and creating an edge from that point to each of the face's vertices. More...
DllExport int	DivideFace_2015 (int ff, Tab< float > &bary)
	Identical to DivideFace but should only be used to load parametric divides for file 2015 and lower. More...
Bounding Box Methods
DllExport void	FaceBBox (int ff, Box3 &bbox)
	Finds the bounding box of all vertices and hidden vertices used by face ff. More...
DllExport void	BBox (Box3 &bbox, bool targonly=FALSE)
	Calculates the bounding box of the vertices & hidden vertices of this mesh. More...
DllExport Box3	getBoundingBox (Matrix3 *tm=NULL, bool targonly=FALSE)
	Retrieves a bounding box for the MNMesh. More...
Targeting Methods
DllExport int	TargetVertsBySelection (int iSelLevel)
	Sets vertex MN_TARG flags based on the existing MN_SEL flags. More...
DllExport int	TargetEdgesBySelection (int iSelLevel)
	Sets edge MN_TARG flags based on the existing MN_SEL flags. More...
DllExport int	TargetFacesBySelection (int iSelLevel)
	Sets face MN_TARG flags based on the existing MN_SEL flags. More...
DllExport void	DetargetVertsBySharpness (float sharpval)
	Clears the MN_TARG flag on vertices representing relatively flat areas, keeping the flag on vertices at sharper corners. More...
Face-Center methods
DllExport void	ComputeCenters (Point3 *ctr, bool targonly=FALSE)
	Finds the centers of all the faces, using repeated calls to ComputeCenter. More...
DllExport void	ComputeCenter (int ff, Point3 &ctr)
	Finds the center of face ff by finding the average of all its vertices. More...
DllExport void	ComputeNormal (int ff, Point3 &normal, Point3 *ctr=NULL)
	Computes a "balanced" normal, in that the normal takes the contribution of all vertices equally. More...
DllExport void	ComputeSafeCenters (Point3 *ctr, bool targonly=FALSE, bool detarg=FALSE)
	Finds the "safe" centers of all the faces, using repeated calls to ComputeSafeCenter. More...
DllExport bool	ComputeSafeCenter (int ff, Point3 &ctr)
	Finds the "safe" center of face ff, if possible. More...
Triangulation-of-polygon Methods
DllExport void	RetriangulateFace (int ff)
	Throws out the current triangulation for face ff and computes a new one. More...
DllExport void	FindDiagonals (int ff, int *diag)
	Finds a diagonal of face ff that does not include any hidden vertices. More...
DllExport void	FindDiagonals (int deg, int *vv, int *diag)
	This method finds diagonals for this sequence of vertices, creating a triangulation for the polygon they form. More...
DllExport void	BestConvexDiagonals (int ff, int *diag=NULL)
	If the given face is convex, this will often produce a better diagonals than RetriangulateFace would. More...
DllExport void	BestConvexDiagonals (int deg, int *vv, int *diag)
	Uses a triangulation scheme optimized for convex polygons to find a set of diagonals for this sequence of vertices, creating a triangulation for the polygon they form. More...
DllExport bool	SetDiagonal (int ff, int d1, int d2)
Unification Methods
These methods turn triangle meshes into polygon meshes
DllExport void	MakePolyMesh (int maxdeg=0, BOOL elimCollin=TRUE)
	Unifies triangles into polygons across invisible edges. More...
DllExport void	MakeConvexPolyMesh (int maxdeg=0)
	Turns a mesh with triangle faces into a mesh with (fewer) convex polygon faces by removing all hidden edges that aren't necessary to maintain convexity. More...
Normal methods
DllExport int	FindEdgeFromVertToVert (int vrt1, int vrt2)
	Some of these methods do not make use of user-specified normals or smoothing groups. More...
DllExport void	GetVertexSpace (int vrt, Matrix3 &tm)
	Chooses a suitable "local space", and sets tm's rotation to match that space. More...
DllExport Point3	GetVertexNormal (int vrt)
	Returns the surface normal at the vertex vrt. More...
DllExport Point3	GetEdgeNormal (int edgeIndex)
	Returns the surface normal at the edge edgeIndex. More...
DllExport Point3	GetFaceNormal (int fc, bool nrmlz=FALSE)
	Returns the surface normal of face fc. More...
Point3	GetEdgeNormal (int vrt1, int vrt2)
	This merely combines GetEdgeNormal (int ed) with FindEdge (int vrt1, int vrt2). More...
DllExport float	EdgeAngle (int edgeIndex)
	Computes the angle at the given edge. More...
DllExport void	FlipNormal (int faceIndex)
	Flips the normal of the specified face, as well as the corresponding map faces in active maps. More...
DllExport void	checkNormals (BOOL illum)
	This method can be used to build the normals and allocate RVert space only if necessary. More...
DllExport void	buildNormals ()
	This method resolves the normals on the RVertex array. More...
DllExport void	buildRenderNormals ()
	This method is similar to buildNormals() above, but ignores the material index (mtlIndex). More...
DllExport bool	FlipElementNormals (DWORD flag=MN_SEL)
	Flips the normals of the specified elements in the mesh. More...
DllExport bool	FlipFaceNormals (DWORD faceFlag)
	This flips the face normals of the tagged faces and also reverses the face winding. More...
Smoothing Group Handling
DllExport void	Resmooth (bool smooth=TRUE, bool targonly=FALSE, DWORD targmask=~0x0)
	Applies new smoothing (or removes smoothing groups) from selected areas of the MNMesh. More...
DllExport DWORD	CommonSmoothing (bool targonly=FALSE)
	Finds what smoothing groups, if any, are common to all faces in this MNMesh. More...
DllExport DWORD	GetNewSmGroup (bool targonly=FALSE)
	Produces a single smoothing group that is not currently used in the MNMesh. More...
DllExport MtlID	GetNewMtlID (bool targonly=FALSE)
	Produces the lowest material ID not used in any faces in the MNMesh. More...
DllExport DWORD	GetOldSmGroup (bool targonly=FALSE)
	Returns a smoothing group that is currently used somewhere in the mesh, or returns zero if all faces have no smoothing. More...
DllExport DWORD	GetAllSmGroups (bool targonly=FALSE)
	Find all smoothing groups used in this mesh. More...
DllExport DWORD	FindReplacementSmGroup (int ff, DWORD os)
	Finds available smoothing groups you can use to replace the given smoothing group without messing up the mesh's shading. More...
DllExport void	PaintNewSmGroup (int ff, DWORD os, DWORD ns)
	Recursively replaces the old smoothing group with the new smoothing group. More...
DllExport bool	SeparateSmGroups (int v1, int v2)
	Changes the smoothing groups on faces using v2 so that they are distinct from any smoothing groups on faces using v1. More...
DllExport void	AutoSmooth (float angle, BOOL useSel, BOOL preventIndirectSmoothing)
	Applies new smoothing groups to the whole mesh or to selected faces based on angles between faces. More...
DllExport DWORD	FindAvailableSmoothingGroups (int faceIndex, DWORD excludeSmoothing=0)
	Return a DWORD of smoothing groups that a face can use without smoothing to any adjacent face (either across shared edges or shared vertices). More...
DllExport DWORD	FindAvailableSmoothingGroupFromFaceList (IntTab faceList, DWORD excludeSmoothing=0)
	Return a DWORD containing the lowest-order smoothing group that a list of faces can use without smoothing to any adjacent face (either across shared edges or shared vertices). More...
DllExport bool	OptimizeSmoothingGroups (BitArray optimizeFaces)
	Process the specified faces and eliminate any redundant smoothing group usage. More...
Fence Methods
DllExport void	FenceMaterials ()
	These methods make fences for the MNMesh::SabinDoo() algorithm. More...
DllExport void	FenceSmGroups ()
	Sets the MN_EDGE_NOCROSS flag on all edges that lie between faces with exclusive smoothing groups. More...
DllExport void	FenceFaceSel ()
	Sets the MN_EDGE_NOCROSS flag on all edges that lie between selected & non-selected faces. More...
DllExport void	FenceOneSidedEdges ()
	Sets the MN_EDGE_NOCROSS flag on all edges that are on the boundary. More...
DllExport void	FenceNonPlanarEdges (float thresh=.9999f, bool makevis=FALSE)
	Sets MN_EDGE_NOCROSS flags on edges between faces that aren't in the same plane. More...
DllExport void	SetMapSeamFlags ()
	Sets the MN_EDGE_MAP_SEAM on all edges that are "seams" for any active map(s). More...
DllExport void	SetMapSeamFlags (int mapChannel)
	Sets the MN_EDGE_MAP_SEAM on all edges that are "seams" for the specified map(s). More...
Face Point Functions
These functions are for querying details about a point on a face.
DllExport int	FindFacePointTri (int ff, Point3 &pt, double *bary, int *tri)
	Finds the sub-triangle and (optionally) barycentric coordinates within that triangle of a point that lies on this face. More...
DllExport UVVert	FindFacePointMapValue (int ff, Point3 &pt, int mapChannel)
	This method is available in release 3.0 and later only. More...
Hole Fixing Functions
DllExport void	GetBorder (MNMeshBorder &brd, int selLevelType=MNM_SL_OBJECT, DWORD targetFlag=MN_SEL)
	Finds border loops composed of all one-sided edges. More...
DllExport void	FillInBorders (MNMeshBorder *b=NULL)
	Fills in all the borders of a mesh. More...
DllExport void	FindOpenRegions ()
	Scans mesh to determine what parts of it are open or closed. More...
Doubled Mapping Vertex Functions
Double mapped vertexes are individual map vertices that are used to correspond to different regular vertices. For example, the standard map on the box object uses the same mapping vertices on the top as on the bottom. This can be a problem if the user wants to change the map in one region, but not the other. It also causes problems in NURMS MeshSmooth, where the user can change weights in one region but not in the other. So the following methods detect and fix such vertices.
DllExport BOOL	CheckForDoubledMappingVerts ()
	This method is a debugging tool. More...
DllExport void	EliminateDoubledMappingVerts ()
	Eliminates double mapped vertices in linear time. More...
Isolated Mapping Vertex Functions
Isolated mapping vertices are vertexes that aren't used by any mapping faces.
DllExport void	EliminateIsoMapVerts ()
	Deletes isolated mapping vertices. More...
DllExport void	EliminateIsoMapVerts (int mapChannel)
	Deletes isolated mapping vertices on a specific channel. More...
Operators
DllExport MNMesh &	operator= (const MNMesh &from)
	Assignment operator. More...
DllExport MNMesh &	operator+= (const MNMesh &from)
	Union operator. More...
Debugging Functions
Uses DebugPrint to print out the entire MNMesh to the Debug Results window in DevStudio. This can be useful for tracking down bugs. Be careful not to leave MNDebugPrint calls in your final build; they will slow down your effect to no purpose. Parameters: bool triprint=FALSE Controls whether or not triangulation information is printed out for each face. Usually this information isn't desired.
DllExport void	MNDebugPrint (bool triprint=FALSE)
DllExport void	MNDebugPrintVertexNeighborhood (int vv, bool triprint=FALSE)
	Uses DebugPrint to print out information about all the edges, faces, and vertices in the immediate vicinity of vertex vv. More...
DllExport bool	CheckAllData ()
	Thoroughly checks a MNMesh to make sure that no components refer to dead components; that when one component refers to another, the other refers back to the first; and that orientation is correctly matched between faces and edges. More...
Splitting and Subdividing Method
DllExport int	SplitTriEdge (int ee, float prop=.5f, float thresh=MNEPS, bool neVis=TRUE, bool neSel=FALSE)
	Creates a new vertex in the middle of an edge, splitting the edge into two edges. More...
DllExport int	SplitTriFace (int ff, double *bary=NULL, float thresh=MNEPS, bool neVis=TRUE, bool neSel=FALSE)
	Adds a vertex somewhere in a triangle face, and also adds edges from that vertex to each of the corners, splitting the face into 3 smaller triangle faces. More...
DllExport void	SplitTri6 (int ff, double *bary=NULL, int *nv=NULL)
	This is another way to subdivide a face on a triangular mesh into sub-triangles. More...
DllExport int	SplitEdge (int ee, float prop=.5f)
	Creates a new vertex somewhere in the middle of an edge, splitting the edge into two edges. More...
DllExport int	SplitEdge (int ee, float prop, Tab< int > *newTVerts)
	This new SplitEdge variant allows you to recover information about the new map vertices created at the point where the edge is split. More...
DllExport int	SplitEdge (int ff, int edgeIndex, float prop, bool right, int *nf=NULL, int *ne=NULL, bool neVis=FALSE, bool neSel=FALSE, bool allconvex=FALSE)
	Splits an edge that is specified from the face level, and splits off triangles from the adjacent faces. More...
DllExport int	IndentFace (int ff, int ei, int nv, int *ne=NULL, bool nevis=TRUE, bool nesel=FALSE)
	Uses a new vertex to "indent" one of the sides of the face. More...
DllExport void	SeparateFace (int ff, int a, int b, int &nf, int &ne, bool neVis=FALSE, bool neSel=FALSE, bool track=false)
	This routine takes a larger face and divides it into two smaller faces, creating a new edge in the process. More...
DllExport bool	Slice (Point3 &N, float off, float thresh, bool split, bool remove, bool flaggedFacesOnly=false, DWORD faceFlags=MN_SEL)
	Slices the MNMesh along a specified plane, splitting edges and faces as needed to divide faces into those above and those below the plane. More...
DllExport bool	SplitFlaggedVertices (DWORD flag=MN_SEL)
	Splits the flagged vertices into a clone for each face using the vertex. More...
DllExport bool	SplitFlaggedEdges (DWORD flag=MN_SEL)
	"Splits" edges by breaking vertices on two or more flagged edges into as many copies as needed. More...
DllExport bool	SplitFacesUsingBothSidesOfEdge (DWORD edgeFlag=0x0)
DllExport void	MultiDivideEdge (int edge, int segments)
	Splits an edge into multiple edges. More...
DllExport void	MakeConvex ()
	Calls MakeFaceConvex() on all (non-dead) faces, producing a mesh with 100% convex faces. More...
DllExport void	MakeFaceConvex (int ff)
	Makes face ff convex, essentially by chopping off corners. More...
DllExport void	RestrictPolySize (int maxdeg)
	Subdivides polygons as needed so that no polygon has degree larger than maxdeg. More...
DllExport void	MakePlanar (float planarThresh, bool track=false)
	Makes all faces planar, within the angle threshold given, by subdividing them as necessary. More...
DllExport void	MakeFacePlanar (int ff, float planarThresh, bool track=false)
	Makes the specified face planar by subdividing if necessary. More...
Welding Functions
DllExport bool	WeldVerts (int a, int b)
	Welds vertices a and b, correcting the mesh topology to match. More...
DllExport bool	WeldEdge (int ee)
	Welds the endpoints of edge ee, correcting the mesh topology to match. More...
DllExport bool	WeldBorderVerts (int v1, int v2, Point3 *destination)
	Welds vertices v1 and v2 together. More...
DllExport bool	WeldBorderEdges (int e1, int e2)
	Welds the specified border edges together. More...
DllExport bool	WeldBorderVerts (float thresh, DWORD flag=MN_SEL)
	Welds the specified border vertices together. More...
DllExport bool	WeldOpposingEdges (DWORD edgeFlag)
	Welds pairs of one-sided edges between the same two vertices. More...
Tessellation Methods
DllExport void	TessellateByEdges (float bulge, MeshOpProgress *mop=NULL)
	This is a tessellation routine similar to AndersonDo(). More...
DllExport bool	AndersonDo (float interp, int iSelLevel, MeshOpProgress *mop=NULL, DWORD subdivFlags=0)
	It breaks every MNFace into deg new faces with four sides. More...
DllExport void	TessellateByCenters (MeshOpProgress *mop=NULL)
	Note that this algorithm roughly triples the size of the MNMesh. More...
DllExport void	SabinDoo (float interp, int iSelLevel, MeshOpProgress *mop=NULL, Tab< Point3 > *offsets=NULL)
	Note that this algorithm roughly triples the size of the MNMesh. More...
DllExport void	SabinDooVert (int vid, float interp, int iSelLevel, Point3 *ctr, Tab< Point3 > *offsets=NULL)
	This applies the Sabin-Doo tessellation technique to a single vertex. More...
DllExport void	CubicNURMS (MeshOpProgress *mop=NULL, Tab< Point3 > *offsets=NULL, DWORD subdivFlags=0)
	Non-uniform rational mesh smooth. More...
Boolean Methods
DllExport void	PrepForBoolean ()
	Prepares a MNMesh for a Boolean operation. More...
DllExport bool	BooleanCut (MNMesh &m2, int cutType, int fstart=0, MeshOpProgress *mop=NULL)
	BooleanCut uses the same techniques as MakeBoolean to cut the faces of this with the faces of m2. More...
DllExport bool	MakeBoolean (MNMesh &m1, MNMesh &m2, int type, MeshOpProgress *mop=NULL)
	Makes this MNMesh into a Boolean result of the given MNMeshes. More...
Connection Methods
DllExport void	Connect (MNMeshBorder &borderList, int segs, float tension, bool sm_bridge, bool sm_ends, Tab< int > *vsep=NULL)
	Connect automatically figures out which loops in the given MNMeshBorder would make good candidates for connecting, and calls ConnectLoop on them all to connect them. More...
DllExport void	ConnectLoops (Tab< int > &loop1, Tab< int > &loop2, int segs, float tension, DWORD smGroup, MtlID mat, bool sm_ends)
	Connects two border loops by filling in new geometry between them, as is done in the Connect compound object. More...
DllExport bool	ConnectEdges (DWORD edgeFlag, int segments=2)
	Connect the marked edges of a polygon if they are opposing. More...
DllExport bool	ConnectVertices (DWORD vertexFlag)
	Connects tagged vertices across a polygon. More...
Face and Vertex Cloning Operations
DllExport void	CloneVerts (DWORD cloneFlag=MN_SEL, bool clear_orig=TRUE)
	Clones flagged vertices, creating new vertices that aren't used by any faces. More...
DllExport void	CloneFaces (DWORD cloneFlag=MN_SEL, bool clear_orig=TRUE)
	Clones the flagged faces, as well as all the vertices and edges that are used by the faces. More...
DllExport void	CopyBasics (const MNMesh &from, bool copyEdges=false)
	Copies bare geometry only - no per-vertex data, maps, or normals. More...
Plane Methods
DllExport bool	MakeFlaggedPlanar (int selLev, DWORD flag=MN_SEL, Point3 *delta=NULL)
	Moves the flagged components into their "average plane". More...
DllExport bool	MoveVertsToPlane (Point3 &norm, float offset, DWORD flag=MN_SEL, Point3 *delta=NULL)
	Projects the flagged vertices into the specified plane, or produces an array of offsets which would do so. More...
Detach Operations
DllExport bool	DetachFaces (DWORD flag=MN_SEL)
	Detaches specified faces to a separate element, cloning vertices and edges as necessary on the boundary between flagged and unflagged faces. More...
DllExport bool	DetachElementToObject (MNMesh &nmesh, DWORD fflags=MN_SEL, bool delDetached=true)
	Detaches specified faces (and related vertices and edges) to a new MNMesh. More...
Extrusion Methods
DllExport bool	ExtrudeFaceClusters (MNFaceClusters &fclust)
	Performs the topological component of an extrusion on all face clusters. More...
DllExport bool	ExtrudeFaceCluster (MNFaceClusters &fclust, int cl)
	Performs the topological component of an extrusion on the specified face cluster. More...
DllExport bool	ExtrudeFaces (DWORD flag=MN_SEL)
	Performs the topological component of an extrusion on each flagged face individually. More...
DllExport void	GetExtrudeDirection (MNChamferData *mcd, DWORD faceFlag)
DllExport void	GetExtrudeDirection (MNChamferData *mcd, MNFaceClusters *fclust=NULL, Point3 *clustNormals=NULL)
	Finds the direction vectors for the geometric component of an extrusion after the topological component has been completed. More...
DllExport bool	ExtrudeVertices (DWORD vertexFlag, MNChamferData *pMCD, Tab< Point3 > &tUpDir)
	This computes the new extruded vertices from the selected vertices using the using the current vertex selection. More...
DllExport bool	ExtrudeEdges (DWORD edgeFlag, MNChamferData *pMCD, Tab< Point3 > &tUpDir)
	Same as ExtrudeVertices() but is applied to the edges. More...
DllExport bool	ExtrudeFaceClusterAlongPath (Tab< Matrix3 > tFrenets, MNFaceClusters &fclust, int clusterID, bool align)
	Extrudes a group of faces along a path defined by tFrenets. More...
Coloring Methods
DllExport bool	SetVertColor (UVVert clr, int mapChannel, DWORD flag=MN_SEL)
	Sets vertex colors for the specified vertices. More...
DllExport bool	SetFaceColor (UVVert clr, int mapChannel, DWORD flag=MN_SEL)
	Sets vertex colors for the specified faces. More...
Chamfer Operations
DllExport bool	ChamferVertices (DWORD flag=MN_SEL, MNChamferData *mcd=NULL)
	Performs the topological component of a vertex chamfer on the flagged vertices, and provides the data needed to do the geometric component. More...
DllExport bool	ChamferEdges (DWORD flag=MN_SEL, MNChamferData *mcd=NULL)
	Performs the topological component of an edge chamfer on the flagged edges, and provides the data needed to do the geometric component. More...
DllExport bool	QuadChamfer (float amount, int segments, float tension, MN_QCHAM_TYPE resultType, DWORD flag=MN_SEL)
	Performs a Quad Chamfer operation on the flagged edges using the original Max 2015 options and Max 2015 version of the Quad Chamfer algorithm. More...
DllExport bool	QuadChamfer (float amount, int segments, float tension, DWORD optionFlags, MN_QCHAM_TYPE resultType, DWORD flag=MN_SEL, int version=QCHAM_VERSION_LATEST)
	Performs a Quad Chamfer operation on the flagged edges with options and versioning. More...
Pipeline Object Functions
DllExport void	ApplyMapper (UVWMapper &mapChannel, int channel=0, BOOL useSel=FALSE)
	Applies UVW Mapper to create the desired mapping in the specified channel. More...
DllExport void	InvalidateGeomCache ()
	Invalidates information, like bounding box and face normals, that's dependent on Geometry. More...
DllExport void	InvalidateTopoCache (bool in_clearCacheFlags=true)
	Clears out topology-dependent cache information. More...
DllExport void	UpdateDisplayVertexColors ()
	This method is used to manage the display of vertex colors from any channel (or those that are passed in by some calling routine). More...
DllExport void	SetDisplayVertexColors (int chan)
	This method is used to manage the display of vertex colors from any channel (or those that are passed in by some calling routine). More...
DllExport void	SetDisplayVertexColors (UVVert *mv, MNMapFace *mf)
	If you have cached your own vertex color information that isn't in any of the map channels provided, you can use this method to set the internal pointers to use your data. More...
DllExport void	PrepForPipeline ()
	This method reconciles flags with arrays, checks and modifies data, ensures that the caches are consistent, and prepares the MNMesh pipeline. More...
DllExport void	allocRVerts ()
	Allocates the "render vertices" used to optimize display routines. More...
DllExport void	updateRVerts (GraphicsWindow *gw)
	Fills in the render vertices with display coordinates based on the specified view. More...
DllExport void	freeRVerts ()
	Frees the "render vertices" used to optimize display routines. More...
Display Flag Methods
See MNMesh Display Flags for a list of supported display flags.
void	SetDispFlag (DWORD vflags)
	This method allows you to set the display flags. More...
DWORD	GetDispFlag (DWORD vflags)
	This method returns the displFlags & f. More...
void	ClearDispFlag (DWORD vflags)
	This method allows you to clear the specified display flags. More...
Render Methods
DllExport void	render (GraphicsWindow *gw, Material *ma, RECT *rp, int compFlags, int numMat=1, InterfaceServer *is=NULL)
	Causes the MNMesh to display itself in the indicated GraphicsWindow. More...
DllExport void	renderFace (GraphicsWindow *gw, int ff)
	Displays the indicated face in the GraphicsWindow. More...
DllExport void	render3DFace (GraphicsWindow *gw, int ff)
	Displays the indicated face in the GraphicsWindow using hardware acceleration for texture and lighting if available. More...
DllExport void	render3DDiagonals (GraphicsWindow *gw, DWORD compFlags)
	Displays all face diagonals in the GraphicsWindow using hardware acceleration for texture and lighting if available. More...
DllExport void	renderDiagonals (GraphicsWindow *gw, DWORD compFlags)
	Displays all face diagonals in the GraphicsWindow. More...
DllExport void	renderDiagonal (GraphicsWindow *gw, int ff, bool useSegments=false, bool *lastColorSubSel=NULL)
	Displays diagonals for the specified face in the GraphicsWindow. More...
DllExport void	render3DEdges (GraphicsWindow *gw, DWORD compFlags)
	Displays all edges in the GraphicsWindow using hardware acceleration for texture and lighting if available. More...
DllExport void	renderEdges (GraphicsWindow *gw, DWORD compFlags)
	Displays all edges in the GraphicsWindow. More...
DllExport void	renderEdge (GraphicsWindow *gw, int ee, bool useSegments=false, bool *lastColorSubSel=NULL)
	Displays an edge in a GraphicsWindow. More...
Object Overrides
DllExport void	ShallowCopy (MNMesh *amesh, ChannelMask channels)
DllExport void	NewAndCopyChannels (ChannelMask channels)
DllExport void	FreeChannels (ChannelMask channels, BOOL zeroOthers=1)
IO Functions
See also Animatable
DllExport IOResult	Save (ISave *isave)
DllExport IOResult	Load (ILoad *iload)
FlagUser Overrides
DllExport void	ClearFlag (DWORD fl)
InterfaceServer Overrides
DllExport BaseInterface *	GetInterface (Interface_ID id)
Cache and Optimization Methods
DllExport void	ReduceDisplayCaches ()
	Forces all the derived data used to display the mesh to be deleted. More...
DllExport bool	NeedGWCacheRebuilt (GraphicsWindow *gw, Material *ma, int numMat)
	This returns whether the Graphics Cache for this object needs to be rebuilt. More...
DllExport void	BuildGWCache (GraphicsWindow *gw, Material *ma, int numMat, BOOL threaded)
	Builds the graphics window cached mesh. More...
DllExport void	InvalidateHardwareMesh (DWORD keepFlags=0)
	This method can be used to invalidate any display-technology-specific caches of the MNMesh. More...
DllExport void	SetStaticMesh (bool staticMesh)
	Set the mesh or as static or not. More...
Specified Normal Methods
DllExport MNNormalSpec *	GetSpecifiedNormals ()
	Returns a pointer to the user-specified normal interface, if present. More...
DllExport MNNormalSpec *	GetSpecifiedNormalsForDisplay ()
	Returns a non-NULL MNNormalSpec interface pointer only if the interface is present, and is prepared for use in display - otherwise, it returns NULL, and we fall back on the smoothing groups. More...
DllExport void	ClearSpecifiedNormals ()
	Clears out the specified normal interface, if present. More...
DllExport void	SpecifyNormals ()
	Creates the user-specified normal interface in this mesh. More...
Miscellaneous Methods
DllExport void	Transform (Matrix3 &xfm)
	Transforms all vertices & hidden vertices by the Matrix xfm. More...
bool	IsClosed ()
	Figures out if this mesh is completely closed. More...
DllExport void	Relax (float relaxval, bool targonly=TRUE)
	Similar to the 3ds Max "Relax" modifier: this modifier moves each MNVert towards the average of all vertices to which it is connected (by MNEdges). More...
DllExport bool	LiftFaceClusterFromEdge (int liftEdge, float liftAngle, int segments, MNFaceClusters &fclust, int clusterID)
	Detaches the face cluster and rotates its around the hinge edge and fills in the gap. More...
DllExport void	SmoothByCreases (DWORD creaseFlag)
	This is an auto-smooth algorithm that allows the developer to specify exactly which edges should be creases and which should be smoothed across. More...
DllExport void	GenerateRenderItems (MaxSDK::Graphics::IRenderItemContainer &renderItems, const MaxSDK::Graphics::GenerateMeshRenderItemsContext &generateRenderItemsContext)
	Generate a set of render items according to the given render-item-generate context. More...
DllExport void	GenerateDeferredRenderItems (MaxSDK::Graphics::IRenderItemContainer &renderItems, const MaxSDK::Graphics::GenerateMeshRenderItemsContext &generateRenderItemsContext)
	Generate a set of render items according to the given render-item-generate context. More...
Topology Utilities
DllExport void	FaceFindEdgeAdjacentFaces (int faceIndex, BitArray &adjacentFaces, IntTab &adjacentFaceIndexes, bool includeFaceIndex=false)
	Create a map and list of faces adjacent to a given face's edges. More...
DllExport void	FaceFindAdjacentFaces (int faceIndex, BitArray &adjacentFaces, IntTab &adjacentFaceIndexes, bool includeFaceIndex=false)
	Create a map and list of faces adjacent to a given face. More...
DllExport void	VertexFindAdjacentFaces (int vertexIndex, BitArray &adjacentFaces, IntTab &adjacentFaceIndexes)
	Create a map and list of faces adjacent to a vertex. More...
Public Member Functions inherited from FlagUser
	FlagUser ()
void	SetFlag (DWORD fl, bool val=TRUE)
void	ClearFlag (DWORD fl)
bool	GetFlag (DWORD fl) const
void	ClearAllFlags ()
void	CopyFlags (DWORD fl)
void	CopyFlags (const FlagUser &fu)
void	CopyFlags (const FlagUser *fu)
void	CopyFlags (DWORD fl, DWORD mask)
void	CopyFlags (const FlagUser &fu, DWORD mask)
void	CopyFlags (const FlagUser *fu, DWORD mask)
void	OrFlags (const FlagUser &fu)
void	OrFlags (const FlagUser *fu)
void	AndFlags (const FlagUser &fu)
void	AndFlags (const FlagUser *fu)
bool	FlagMatch (DWORD fmask, DWORD fl) const
bool	FlagMatch (DWORD fmask, const FlagUser &fu) const
bool	FlagMatch (DWORD fmask, const FlagUser *fu) const
DWORD	ExportFlags () const
void	ImportFlags (DWORD fl)
IOResult	WriteFlags (ISave *isave, ULONG *nb) const
IOResult	ReadFlags (ILoad *iload, ULONG *nb)
Public Member Functions inherited from BaseInterfaceServer
virtual UtilExport int	NumInterfaces () const
virtual UtilExport BaseInterface *	GetInterfaceAt (int i) const
virtual UtilExport	~BaseInterfaceServer ()
Public Member Functions inherited from InterfaceServer
virtual UtilExport	~InterfaceServer ()
	Destructor. More...

Public Attributes
MNVert *	v
	The array of vertices. More...
MNEdge *	e
	The array of edges. More...
MNFace *	f
	The array of faces;. More...
int	numv
	Number of MNVert elements in v. More...
int	nume
	Number of MNEdge elements in e. More...
int	numf
	Number of MNFace elements in f. More...
int	numm
PerData *	vd
	The array of PerData objects which maintain and provide access to the floating point vertex data. More...
BitArray	vdSupport
	This bit array indicates if a particular vertex data channel is supported in this MNMesh. More...
PerData *	ed
	The array of PerData objects which maintain and provide access to the floating point edge data. More...
BitArray	edSupport
	This bit array indicates if a particular edge data channel is supported in this MNMesh. More...
int	selLevel
	The current MNMesh selection level. More...
DWORD	dispFlags
	Display flags. More...
Tab< int > *	vedg
	This is an array of int Tabs that records which edges use each vertex. More...
Tab< int > *	vfac
	This is an array of int Tabs that records which faces touch each vertex. More...

Friends
class	HardwareMNMesh
class	MNNormalSpec
class	MNMeshUtilites8Impl
class	MNMeshUtilities10Impl
class	MNMeshFGBGObject
class	IMNMeshLegacySnap
class	MaxSDK::Graphics::EditablePolyMeshNormalChannel
void	gfxCleanup (void *data)

Cutting Methods
static const DWORD	mCutVersion
	This is the current version used for Cut and CutEdge and should be upped and documented when the cut code changes so edit poly can load the correct cut on older files to prevent them from breaking due to vertex reorder 1 : 2015 and older 2 : fixes a bug MAXX-19584 which was when a vertex and edge hit the same spot the edge would be picked causing a duplicate vertex, now the vertex is picked. More...
DllExport int	CutFace (int f1, Point3 &p1, Point3 &p2, Point3 &Z, bool split)
	Implements the Editable Poly Cut algorithm from the face level - cuts from a point on one face to a point on another face. More...
DllExport int	CutEdge (int e1, float prop1, int e2, float prop2, Point3 &Z, bool split)
	Implements the Editable Poly Cut algorithm from the edge level - cuts from a point on one edge to a point on another edge. More...
DllExport int	CutEdge_Versioned (int e1, float prop1, int e2, float prop2, Point3 &Z, bool split, DWORD ver)
	Only call this method when you need to go back to a previous version of the code to load older files to maintain procedurality. More...
DllExport int	Cut (int startv, Point3 &end, Point3 &Z, bool split)
	Implements the Editable Poly Cut algorithm from the vertex level - cuts from one vertex to another. More...
DllExport int	Cut_Versioned (int startv, Point3 &end, Point3 &Z, bool split, DWORD ver)
	Only call this method when you need to go back to a previous version of the code to load older files to maintain procedurality. More...

Space Accelerating Data Structure
These functions and member variable handle the space accelerating data structure used internally by Max system. 3ds Max 2017 release introduced the space accelerating data structure and algorithm to speed up the methods related to space looking-up. The space accelerating data can significantly improve the space looking-up algorithm, however the system may take some time to build the space accelerating data.It is recommended to use the following functions in the scenario of updating once then looking up multiple times.
bool	checkFaceSel (int face_i, Mesh_SelParams &params)
	Invoke these methods to check the Sub-Objects associated with the face indexed by face_i is in the hit region. More...
bool	checkFaceEdgesSel (int face_i, Mesh_SelParams &params)
bool	checkFaceDiagonalSel (int face_i, Mesh_SelParams &params)
bool	checkVertSel (int vert_i, Mesh_SelParams &params)
bool	checkFaceBackFacing (int face_i, Mesh_SelParams &params)
DllExport bool	IsAccelDataDirty ()
	Checks if the space accelerating data is up-to-date. More...
DllExport void	DirtyAccelData ()
	Update the space accelerating data. More...
DllExport BOOL	select (GraphicsWindow *gw, Material *ma, HitRegion *hr, int abortOnHit=FALSE, int numMat=1)
	Checks the given HitRegion to see if it intersects this Mesh object. More...
DllExport BOOL	SubObjectHitTest (GraphicsWindow *gw, Material *ma, HitRegion *hr, DWORD flags, SubObjHitList &hitList, int numMat=1)
	This method may be called to perform sub-object hit testing on this mesh. More...
DllExport int	IntersectRay (Ray &ray, float &at, Point3 &norm)
	Provides the intersection point and normal for the ray with this mesh. More...
DllExport int	IntersectRay (Ray &ray, float &at, Point3 &norm, int &fi, Tab< float > &bary)
	Provides the intersection point and normal for the ray with this mesh. More...
DllExport const float *	IntersectRay (Ray &ray, float &at, Point3 &norm, int &fi)
	Similiar to above overrided function with the difference of having the barycentric coordinates as the function returned result. More...
DllExport Point3	ComputeRenderNormal (int face_i, int corner)
	This function computes the render normal for the specified face and corner. More...
DllExport Point3	ComputeInterpolatedRenderNormal (int face_i, const float *bary)
	This function computes the interpolated normals regarding the barycentric coordinates. More...
DllExport void *	GetSpaceAccelHandle ()

Additional Inherited Members
Static Public Member Functions inherited from MaxHeapOperators
static UtilExport void *	operator new (size_t size)
	Standard new operator used to allocate objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e)
	Standard new operator used to allocate objects if there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate objects that takes the type of memory, filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate arrays of objects. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void	operator delete (void *ptr)
	Standard delete operator used to deallocate an object If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an object If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an object that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, void *placement_ptr)
	Placement new operator. More...
static UtilExport void	operator delete (void *ptr, void *placement_ptr)
	Placement delete operator. More...
static UtilExport void *	aligned_malloc (size_t size, size_t alignment)
	Allocates memory on a specified alignment boundary. More...
static UtilExport void *	aligned_realloc (void *ptr, size_t size, size_t alignment)
	Reallocates memory on a specified alignment boundary. More...
static UtilExport void	aligned_free (void *ptr)
	Frees a block of memory that was allocated with aligned_malloc/aligned_realloc. More...
Protected Attributes inherited from BaseInterfaceServer
Tab< BaseInterface * >	interfaces

Constructor & Destructor Documentation

MNMesh ( )

inline

Initializes the MNMesh with no components and the default flags.

{ Init(); DefaultFlags (); }

MNMesh ( const Mesh &  from )

inline

Constructor.

Initializes the MNMesh with the mesh "from", and fills in the topology completely (using FillInMesh).

{ Init(); SetFromTri (from); FillInMesh (); }

MNMesh ( const MNMesh &  from )

inline

Copy constructor.

{ Init(); DefaultFlags(); *this = from; }

DllExport ~MNMesh

(

)

Destructor.

Frees all allocated memory (using Clear).

Member Function Documentation

void DefaultFlags ( )

inline

Clears all flags.

{ ClearAllFlags (); }   

DllExport void Init

(

)

The data members are initialized as follows:

nv_alloc = ne_alloc = nf_alloc = nm_alloc = 0;
numv = nume = numf = numm = 0;
v = NULL;
e = NULL;
f = NULL;
m = NULL;
vd = NULL;
ed = NULL;
vedg = NULL;
vfac = NULL;
bdgBox.Init();
fnorm = NULL;
dispFlags = 0;
rVerts = NULL;
cacheGW = NULL;
normalsBuilt = 0;
norScale = 0.0f;
selLevel = MNM_SL_OBJECT; 

DllExport void VAlloc	(	int	num,
		bool	keep = TRUE
	)

Allocates and inits the specified number of MNVerts.

Parameters:

int num

The number of verts to allocate.

bool keep=TRUE

If TRUE any previous verts are kept; otherwise they are discarded.

DllExport void VShrink

(

int

num = -1

)

Shrinks the nv_alloc size of the MNVert array to the specified size.

Parameters:

int num=-1

The new size of the array. The default -1 means to shrink array allocation to numv.

DllExport void freeVEdge

(

)

Deallocates any MNEdges in the vedg table and sets the vedg pointer to NULL.

DllExport void VEdgeAlloc

(

)

Allocates the vedg array.

DllExport void freeVFace

(

)

Deallocates the vfac array.

DllExport void VFaceAlloc

(

)

Allocates the vfac array.

DllExport void EAlloc	(	int	num,
		bool	keep = TRUE
	)

Allocates the MNEdge data array e with the specified size.

Parameters:

int num

The number of MNEdges to allocate.

bool keep=TRUE

If TRUE any previously allocated edges are kept; otherwise they are discarded.

DllExport void EShrink

(

int

num = -1

)

Reduces the ne_alloc size of the MNEdge data array e to the specified number of elements.

Parameters:

int num=-1

The new size for the array. The value -1 means to use the current number of edges, nume.

DllExport void FAlloc	(	int	num,
		bool	keep = TRUE
	)

Allocates the MNFace array f with the specified size.

Parameters:

int num

The number of MNFaces to allocate.

bool keep=TRUE

If TRUE any previously allocated faces are kept; otherwise they are discarded.

DllExport void FShrink

(

int

num = -1

)

Reduces the nf_alloc size of the MNFace data array f to the specified number of elements.

Parameters:

int num=-1

The new size for the array. The value -1 means to use the current number of faces, numf.

DllExport void MAlloc	(	int	num,
		bool	keep = TRUE
	)

Allocates the MNMap array m with the specified size.

Parameters:

int num

The number of MNMap elements to allocate.

bool keep=TRUE

If TRUE any previously allocated MNMaps are kept; otherwise they are discarded.

DllExport void MShrink

(

int

num = -1

)

Reduces the nm_alloc size of the MNMap data array m to the specified number of elements.

Parameters:

int num=-1

The new size for the array. The value -1 means to use the current number of maps, numm.

int VNum ( ) const

inline

Returns the number of vertices.

{ return numv; }

MNVert* V ( int  i ) const

inline

Returns a pointer to the i'th MNVert.

{ return &(v[i]); }

Point3& P ( int  i ) const

inline

Returns the point in the i'th MNVert.

P(i) is the same as V(i)->p.

{ return v[i].p; }

int ENum ( ) const

inline

Returns the number of edges.

{ return nume; }

MNEdge* E ( int  i ) const

inline

Returns a pointer to the i'th MNEdge.

{ return &(e[i]); }

int FNum ( ) const

inline

Returns the number of faces.

{ return numf; }

MNFace* F ( int  i ) const

inline

Returns a pointer to the i'th MNFace.

{ return &(f[i]); }

int MNum ( ) const

inline

Internal.

{ return numm; }

DllExport int TriNum

(

)

Number of triangles.

DllExport MNMap* M

(

int

mapChannel

)

const

This accessor accepts a value in the range -NUM_HIDDENMAPS to MNum().

Parameters:

int mp

The map channel

DllExport void SetMapNum

(

int

mpnum

)

Allocates and initializes the specified number of MNMap elements in the m array.

Initializing sets the number of verts and faces in the map to zero and sets the MN_DEAD flag.

Parameters:

int mpnum

The number of MNMaps to allocate and initialize.

DllExport void InitMap

(

int

mapChannel

)

Allocates and initializes basic planar map, or a white map for the vertex color channel.

Parameters:

int mp

The map channel to initialize:

0: Vertex Color channel.

1: Default mapping channel.

2 through MAX_MESHMAPS-1: The new mapping channels available in release 3.0.

DllExport void ClearMap

(

int

mapChannel

)

Clears and frees the specified map channel, setting the MN_DEAD flag.

Parameters:

int mp

The map channel to clear.

0: Vertex Color channel.

1: Default mapping channel.

2 through MAX_MESHMAPS-1: The new mapping channels available in release 3.0.

DllExport UVVert MV	(	int	mapChannel,
		int	i
	)		const

Returns the specified UVVert from the specified mapping channel.

Parameters:

int mp

The map channel.

0: Vertex Color channel.

1: Default mapping channel.

2 through MAX_MESHMAPS-1: The new mapping channels available in release 3.0.

int i

The zero based index of the UVVert to return.

DllExport MNMapFace* MF	(	int	mapChannel,
		int	i
	)		const

Returns a pointer to the specified MNMapFace from the specified mapping channel.

Parameters:

int mp

The map channel:

0: Vertex Color channel.

1: Default mapping channel.

2 through MAX_MESHMAPS-1: The new mapping channels available in release 3.0.

int i

The zero based index of the MNMapFace to return.

DllExport UVVert ExtrapolateMapValue	(	int	face,
		int	edge,
		Point3 &	pt,
		int	mapChannel
	)

Returns the total number of triangles; this is a sum of the number of triangles in each face that does not have the MN_DEAD flag set.

Extrapolate map information about a point near a face. Given a point near a given edge of a given face, but near to it, this method will extrapolate what that point's mapping coordinates would be in the mapping scheme used by the face.

Parameters:

int face

The face we want to base mapping information on.

int edge

The index of the edge we're closest to on the face. (This should be the face-based index, in the range (0, deg-1), not the index of the edge in the MNMesh.)

Point3 & pt

The object-space coordinates of the point.

int mp

The map channel we're analyzing.

DllExport bool SeparateMapVerticesInFaceCluster	(	MNFaceClusters &	fclust,
		int	clusterID
	)

Detaches the texture vertices on the border edges of the fclust.

Similar to the Detach() function but instead of being applied to the geometry vertices it is applied to the texture vertices. The border edges texture vertices of the cluster will not be shared with any other faces outside the cluster after this operation

Parameters

fclust	A set of face clusters.
clusterID	The ID of the cluster to operate on.

Returns

Returns true if the operation was successful or false otherwise.

DllExport bool IsEdgeMapSeam	(	int	mapChannel,
		int	edge
	)

Returns whether an edge is a seam or not.

Am edge is a seam if that edge only has 1 texture face connected to it, in other words it is an open texture edge

Parameters

mapChannel	The map channel to look at the texture of..
edge	The edge number.

Returns

Returns true if the operation was successful or false otherwise.

DllExport void FindEdgeListMapVerts	(	const Tab< int > &	lp,
		Tab< int > &	mv,
		int	mapChannel
	)

Returns map verts for both ends of each edge (from f1's perspective) (Very useful for creating new faces at borders.) mv[j*2] is the map vertex corresponding to edge j's v1.

Parameters:

const Tab<int> & lp

A loop of border edges, such as is generated by MNMesh::FindBorders.

Tab<int> & mv

The table into which the map vertices should be put. The size is set to 2*lp.Count().

int mp

The map channel we're analyzing.

DllExport void setNumVData	(	int	ct,
		BOOL	keep = FALSE
	)

Sets the specified number of vertex data elements.

Parameters:

int ct

The number of vertex data elements to set.

BOOL keep=FALSE

If TRUE any previously allocated elements are kept; otherwise they are discarded.

int VDNum ( ) const

inline

Returns the number of vertex data channels maintained by this MNMesh.

{ return vdSupport.GetSize(); }

DllExport BOOL vDataSupport

(

int

vdChannel

)

const

Returns TRUE if the specified channel of vertex data is available for this MNMesh; otherwise FALSE.

Parameters:

int vdChan

The vertex data channel. See Vertex Data Index Options.

DllExport void setVDataSupport	(	int	vdChannel,
		BOOL	support = TRUE
	)

Sets if the specified channel of vertex data is supported by this MNMesh.

Parameters:

int vdChan

The vertex data channel. See Vertex Data Index Options.

BOOL support=TRUE

TRUE to indicate the channel is supported; FALSE to indicate it's not. If TRUE is specified then elements are allocated (if needed). If FALSE is specified the data for the channel is freed.

void* vertexData ( int  vdChannel ) const

inline

Returns a pointer to the vertex data for the specified channel or NULL if the channel is not supported.

Parameters:

int vdChan

The vertex data channel. See Vertex Data Index Options.

{ return vDataSupport(vdChannel) ? vd[vdChannel].data : NULL; }

float* vertexFloat ( int  vdChannel ) const

inline

Returns a pointer to the floating point vertex data for the specified channel of this mesh or NULL if the channel is not supported.

Parameters:

int vdChan

The vertex data channel. See Vertex Data Index Options.

{ return (float *) vertexData (vdChannel); }

DllExport void freeVData

(

int

vdChannel

)

Deletes (deallocates) the vertex data for the specified channel.

Parameters:

int vdChan

The vertex data channel. See Vertex Data Index Options.

DllExport void freeAllVData

(

)

Deallocates the vertex data from all channels and sets the number of supported channels to 0.

float* getVertexWeights ( )

inline

Returns a pointer to the floating point vertex weight data.

{ return vertexFloat(VDATA_WEIGHT); }

void SupportVertexWeights ( )

inline

Sets the channel support for the vertex weights channel (VDATA_WEIGHT).

{ setVDataSupport (VDATA_WEIGHT); }

void freeVertexWeights ( )

inline

Frees (deallocates) the vertex weight channel data.

{ freeVData (VDATA_WEIGHT); }

float* getVSelectionWeights ( )

inline

Returns a pointer to the floating point vertex selection weight data.

{ return vertexFloat(VDATA_SELECT); }

void SupportVSelectionWeights ( )

inline

Sets the channel support for the vertex weights channel (VDATA_SELECT).

{ setVDataSupport (VDATA_SELECT); }

void freeVSelectionWeights ( )

inline

Frees (deallocates) the vertex selection weight channel data.

{ freeVData (VDATA_SELECT); }

DllExport void setNumEData	(	int	ct,
		BOOL	keep = FALSE
	)

Sets the specified number of edge data elements.

Parameters:

int ct

The number of edge data elements to set.

BOOL keep=FALSE

If TRUE any previously allocated elements are kept; otherwise they are discarded.

int EDNum ( ) const

inline

Returns the number of edge data channels maintained by this MNMesh.

{ return edSupport.GetSize(); }

DllExport BOOL eDataSupport

(

int

edChannel

)

const

Returns TRUE if the specified channel of edge data is available for this MNMesh; otherwise FALSE.

Parameters:

int edChan

The edge data channel. See Edge data channel index values.

DllExport void setEDataSupport	(	int	edChannel,
		BOOL	support = TRUE
	)

Sets if the specified channel of edge data is supported by this MNMesh.

Parameters:

int edChan

The edge data channel. See Edge data channel index values.

BOOL support=TRUE

TRUE to indicate the channel is supported; FALSE to indicate it's not.

void* edgeData ( int  edChannel ) const

inline

Returns a pointer to the edge data for the specified channel or NULL if the channel is not supported.

Parameters:

int edChan

The edge data channel. See Edge data channel index values.

{ return eDataSupport(edChannel) ? ed[edChannel].data : NULL; }

float* edgeFloat ( int  edChannel ) const

inline

Returns a pointer to the floating point edge data for the specified channel of this MNMesh or NULL if the channel is not supported.

Parameters:

int edChan

The edge data channel. See Edge data channel index values.

{ return (float *) edgeData (edChannel); }

DllExport void freeEData

(

int

edChannel

)

Deletes (deallocates) the edge data for the specified channel.

Parameters:

int edChan

The edge data channel. See Edge data channel index values.

DllExport void freeAllEData

(

)

Deallocates the edge data from all channels and sets the number of supported channels to 0.

float* getEdgeKnots ( )

inline

Returns a pointer to the floating point edge knot data.

{ return edgeFloat(EDATA_KNOT); }

void SupportEdgeKnots ( )

inline

Sets the channel support for the edge knot channel (EDATA_KNOT).

{ setEDataSupport (EDATA_KNOT); }

void freeEdgeKnots ( )

inline

Frees (deallocates) the edge knot channel data.

{ freeEData (EDATA_KNOT); }

DllExport void VClear

(

int

vv

)

Clears and frees the flags and face/edge lists for the specified vertex.

Parameters

vv	The vertex to clear.

DllExport void VInit

(

int

vv

)

Initializes the specified MNVert, clearing its flags and emptying its face & edge lists (if vfac & edg are allocated).

Parameters:

int vv

The vertex to initialize.

DllExport int VFaceIndex	(	int	vv,
		int	ff,
		int	ee = -1
	)

Returns the index of face ff in the vfac[vv] table.

NOTE that if this face cannot be found, or if it cannot be found accompanied by edge ee>-1, it will cause an assertion failure.

Parameters:

int vv

The vertex to check the face list of.

int ff

The face to look for.

int ee=-1

In cases where the same face touches this vertex more than once, and is therefore represented twice in the vfac table, an optional edge parameter is used to specify which instance of the face you want the index of. However, if the parent MNMesh doesn't have its vertices ordered (as indicated by the MN_MESH_VERTS_ORDERED flag), the extra edge parameter is meaningless and should not be used.

DllExport int VEdgeIndex	(	int	vv,
		int	ee
	)

This method is available in release 3.0 and later only.

It replaces the old MNVert::EdgeIndex method.

Finds the position of edge ee in this MNVert's vedg table. Unlike VFaceIndex (and MNFace's VertIndex and EdgeIndex), each vertex can only touch an edge once, so there's no need for an additional parameter. (There's no such thing as an edge with both ends at the same vertex.)

Parameters:

int vv

The vertex whose edge list should be searched.

int ee

The edge to find.

Returns

Returns -1 if edge ee is not in the edge table.

DllExport void VDeleteEdge	(	int	vv,
		int	ee
	)

This method is available in release 3.0 and later only.

It replaces the old MNVert::DeleteEdge method.

Finds edge ee in the vedg[vv] table and removes it.

Parameters:

int vv

The vertex from whose edge list the edge should be deleted.

int ee

The edge to delete from the vertex's edge list.

DllExport void VDeleteFace	(	int	vv,
		int	ff
	)

This method is available in release 3.0 and later only.

It replaces the old MNVert::DeleteFace method.

Finds face ff in the vfac[vv] table and removes it. NOTE that this method causes an assertion failure if face ff is not in the vfac table. If ff occurs more than once, which is possible on some valid NONTRI meshes, only the first ff is removed.

Parameters:

int vv

The vertex from whose face list the face should be deleted.

int ff

The face to delete from the vertex's face list.

DllExport void VReplaceEdge	(	int	vv,
		int	oe,
		int	ne
	)

This method is available in release 3.0 and later only.

It replaces the old MNVert::ReplaceEdge method.

Finds edge oe in the vedg[vv] table and replaces it with ne. NOTE that this method causes an assertion failure if edge oe is not in the vedg table.

Parameters:

int vv

The vertex in whose edge list the edge should be replaced.

int oe

The edge to replace.

int ne

The replacement edge.

DllExport void VReplaceFace	(	int	vv,
		int	of,
		int	nf
	)

This method is available in release 3.0 and later only.

It replaces the old MNVert::ReplaceFace method.

Finds face of in the vfac[vv] table and replaces it with nf. NOTE that this method causes an assertion failure if face of is not in the vfac table. If of occurs more than once, which is possible on some valid NONTRI meshes, only the first of is replaced.

Parameters:

int vv

The vertex in whose face list the face should be replaced.

int of

The face to replace.

int nf

The replacement.

DllExport void CopyVert	(	int	nv,
		int	ov
	)

This method is available in release 3.0 and later only.

It replaces the old MNVert::operator= by allowing the developer to copy face and edge adjacency information as well as vertex location and flags.

Copies the MNVert data from ov to nv. The face and edge data is copied too if appropriate (ie if MN_MESH_FILLED_IN is set and vfac and vedg are allocated).

Parameters:

int nv

The destination index.

int ov

The source index.

DllExport void MNVDebugPrint

(

int

vv

)

This method is available in release 3.0 and later only.

It replaces the old MNVert::MNDebugPrint method.

Uses DebugPrint to print out vertex information to the Debug Results window in DevStudio. The information consists of the position, edge list, and face list. It is generally a good idea to put in a DebugPrint immediately before this with the index of the vertex, so you know which vertex is being printed out:

DebugPrint(_M("Vertex %d: "), vid);

MNVDebugPrint(vid);

Parameters:

int vv

The zero based index of the MNVert to debug print.

DllExport int NewTri	(	int	a,
		int	b,
		int	c,
		DWORD	smG = 0,
		MtlID	mt = 0
	)

Creates a new tri-face.

Note that no mapping coords or vertex colors can be specified.

Parameters:

int a,b,c

The indices of the vertices that form this triangle.

DWORD smG=0

The smoothing group(s) assigned to the new face.

MtlID mt=0

The material ID assigned to the new face.

Returns

Returns the index of the new face created.

DllExport int NewTri	(	int *	vv,
		DWORD	smG = 0,
		MtlID	mt = 0
	)

Creates a new face of degree 3.

Edge selection and visibility flags are set to the default: all visible and not selected.

Parameters:

int *vv

The indices of the vertices that form this face. (There must be 3 of these.)

DWORD smG

The smoothing group(s) assigned to this face.

MtlID mt

The material ID assigned to this face

Returns

The index of the face created.

DllExport int NewQuad	(	int	a,
		int	b,
		int	c,
		int	d,
		DWORD	smG = 0,
		MtlID	mt = 0
	)

This method will create a new quad.

Previous to 4.0 this method used two tri-faces that shared and invisible edge.

Parameters:

int a, b, c, d

The indices of the vertices that form this quad.

DWORD smG=0

The smoothing group(s) assigned to the new faces.

MtlID mt=0

The material ID assigned to the new faces.

Returns

Returns the index of the quad face created.

DllExport int NewQuad	(	int *	vv,
		DWORD	smG = 0,
		MtlID	mt = 0
	)

This method will create a new quad.

Previous to 4.0 this method used two tri-faces that shared and invisible edge.

Parameters:

int *vv

The indices of the vertices that form this face. (There must be 4 of these.)

DWORD smG

The smoothing group(s) assigned to this face.

MtlID mt

The material ID assigned to this face

Returns

Returns the index of the quad face created.

DllExport int NewFace	(	int	initFace,
		int	degg = 0,
		int *	vv = NULL,
		bool *	vis = NULL,
		bool *	sel = NULL
	)

This method creates a (single) new face with the characteristics given.

The default triangulation for a face of this degree is used; if the face is not convex, this triangulation may be inappropriate. If this is the case, call RetriangulateFace() on this face after it's created.

Parameters:

int initFace

A current face from which smoothing groups, material ID, and flags should be copied. If this is NULL, these values are left at their default values.

int degg

The degree of the face to be created.

int *vv

The indices of the vertices that form the new face. (There must be degg of these.)

bool *vis

This is an array of visibility bits for the edges of the new face. If this is NULL, the default of all edges being visible is used. If this is not NULL, there must be degg values.

bool *sel

This is an array of selection bits for the edges of the new face. If this is NULL, the default of all edges not being selected is used. If this is not NULL, there must be degg values.

DllExport int CreateFace	(	int	degg,
		int *	vv
	)

Creates a new face, using the vertices given.

Note that this method, unlike the similar NewFace() method, maintains all topological links. If there's an edge between vv[0] and vv[1] which is already used by some other face (on the other side), that edge is modified to use this face on its "f2" side. If there's an edge between two sequential vertices with faces on both sides, the creation fails, because it would create an illegal condition.

This method also creates map faces in any active map channels to maintain the validity of the mesh. These map faces use the map vertices that other faces use for the vertices passed in, or if there are no corresponding map vertices yet, use newly created map vertices with the value (1,1,1).

Parameters:

int degg

The degree of the new face.

int *vv

A pointer to an array of degg vertices for the new face.

Returns

The index of the new face, or -1 if the method was unable to create that face.

DllExport int AppendNewFaces

(

int

nfnum

)

Appends the specified number of MNFaces to f.

Parameters:

int nfnum

The number of MNFaces to append.

Returns

The index of the first appended face (ie the old numf).

DllExport void setNumFaces

(

int

nfnum

)

Sets the specified number of MNFaces allocated in f.

Parameters:

int nfnum

The number of MNFaces to set.

DllExport int RegisterEdge	(	int	v1,
		int	v2,
		int	leftFace,
		int	fpos
	)

Edge creation tool.

If there is no edge currently joining vertices v1 and v2, it creates such an edge. If there is an edge starting at v2 and ending on v1, it registers face f as being on the "other side" of the edge.

Parameters:

int v1, v2

The start & end vertices of the edge you wish to register.

int leftFace

The face on the "left" side of this edge, if you're looking from v1 towards v2 with the surface normal above.

int fpos

The index of this edge in face f. This is used to extract visibility and selection information from the face.

Returns

The index of the new edge, or -1 if the edge already exists in the specified direction.

DllExport int SimpleNewEdge	(	int	v1,
		int	v2
	)

Edge creation tool.

Simply makes a new edge from v1 to v2, without worrying about whether such an edge may already exist, or what faces may be on either side. Since edges are required to have at least one valid face on them, using this method obligates the developer to assign f1 on the new edge themselves.

Returns

The index of the new edge.

DllExport int NewEdge	(	int	v1,
		int	v2,
		int	leftFace,
		int	fpos
	)

Edge creation tool.

Requires the developer to previously ascertain that there is no edge from v1 to v2 or from v2 to v1.

Parameters:

int v1, v2

The start & end vertices of the edge you wish to create.

int leftFace

The face on the "left" side of this edge, if you're looking from v1 towards v2 with the surface normal above.

int fpos

The index of this edge in face f. This is used to extract visibility and selection information from the face.

Returns

The index of the new edge.

DllExport int AppendNewEdges

(

int

nenum

)

Appends the specified number of edges.

Parameters:

int nenum

The number of edges to append.

DllExport void setNumEdges

(

int

nenum

)

Sets the number of MNEdges allocated in e.

Parameters:

int nenum

The number of MNEdges to set.

DllExport int NewVert

(

Point3 &

p

)

Creates a new vertex (increasing numv) and sets it to the specified point.

Parameters:

Point3 &p

The point to which the new vert should be initialized.

DllExport int NewVert	(	Point3 &	p,
		int	vid
	)

This method is available in release 3.0 and later only.

It replaces the old MNMesh::NewVert (Point3 &p, MNVert *mv=NULL) method.

Creates a new vertex (increasing numv) and initializes it to the point p and the flags and other characteristics of vertex vid.

Parameters:

Point3 &p

The point to which the new vert should be initialized.

int vid

The index of the existing MNVert from which flags and PerData info should be copied. (Only the MN_SEL and MN_TARG flags are copied.)

DllExport int NewVert

(

int

vid

)

Creates a new vertex and initializes it to location, flags and other characteristics of vertex vid.

Parameters:

int vid

The index of the existing MNVert from which location, flags and PerData info should be copied. (Only the MN_SEL and MN_TARG flags are copied.)

DllExport int NewVert	(	int	v1,
		int	v2,
		float	prop
	)

Creates a new vertex which is a linear combination of two existing vertices.

The new vertex has the MN_SEL and MN_TARG flags of whichever vertex it's closest to. The location and PerData info is interpolated.

Parameters:

int v1

The first vertex to combine.

int v2

The second vertex to combine.

float prop

The proportion along the segment from v1 to v2 where the new vertex should be located.

DllExport int AppendNewVerts

(

int

nvnum

)

Appends the specified number of MNVerts.

Parameters:

int nvnum

The number of MNVerts to append.

Returns

The index of the first appended vertex (ie the old numv).

DllExport void setNumVerts

(

int

nvnum

)

Sets the number of verts, allocating if needed.

Parameters:

int nvnum

The desired number of vertices in the mesh.

DllExport int InsertSpur	(	int	face,
		int	vertIndex,
		Tab< int > *	ptMapVertArray = NULL
	)

Creates a spur on the face at vertexIndex.

This creates a new vertex, and an edge to it at the specified corner of the face. The new vertex is collocated at the old and the edge between the two is referenced twice.

Note

The mesh should not be left in this state. This is just a helper function for other operations.

DllExport void CollapseDeadVerts

(

)

Removes all MNVerts with the MN_DEAD flag from the list of vertices.

Also, it re-indexes all the faces' and edges' vertex references to maintain mesh integrity.

DllExport void CollapseDeadEdges

(

)

Removes all MNEdges with the MN_DEAD flag from the list of edges.

Also, re-indexes all the faces' and vertices' edge references to maintain mesh integrity.

DllExport void CollapseDeadFaces

(

)

Removes all MNFaces with the MN_DEAD flag from the list of faces.

Also, re-indexes all the edges' and vertices' face references to maintain mesh integrity.

DllExport void CollapseDeadStructs

(

)

Performs all 5 of the above collapse functions, safely removing all unused components from this mesh.

DllExport void Clear

(

)

Reinitializes all verts, faces, and edges, freeing the data members of these components, but not freeing the vertex, edge, and face arrays themselves.

This option is suitable if you need to clear a MNMesh you will be reusing. numv, etc, are set to 0.

DllExport void ClearAndFree

(

)

Deletes everything and frees all relevant memory.

Leaves you with an empty MNMesh with the default flags.

DllExport void freeVerts

(

)

Deletes the MNVert array and frees any corresponding vertex data.

DllExport void freeEdges

(

)

Deletes the MNEdge array and frees and corresponding edge data.

DllExport void freeFaces

(

)

Deletes the MNFace array.

DllExport void freeMap

(

int

mapChannel

)

Deletes the MNMap on the specified map channel.

Parameters:

int mp

The map channel.

0: Vertex Color channel.

1: Default mapping channel.

2 through MAX_MESHMAPS-1: The new mapping channels available in release 3.0.

DllExport void freeMaps

(

)

Deletes and frees all the MNMaps.

DllExport bool RemoveVertex

(

int

vertex

)

DllExport bool RemoveSpur

(

int

spur

)

DllExport void DeleteFlaggedFaces	(	DWORD	deathflags,
		DWORD	nvCopyFlags = 0x0
	)

Deletes faces with any of the death flags set, as well as delete vertices and edges surrounded by faces with death flags, and correct the mesh components remaining.

Parameters:

DWORD deathflags

The collection of flags marking the faces you wish to kill.

DWORD nvCopyFlags=0x0

If the NO_BAD_VERTS flag is set on this mesh, DeleteFlaggedFaces will preserve this property. This may involve duplicating some vertices. (See EliminateBadVerts for more information.) If you have vertex flags that you want preserved in this duplication, indicate them in nvCopyFlags. MN_SEL and MN_TARG are always copied, but all other flags are cleared on the new vertex.

DllExport void RemoveEdge

(

int

edge

)

Kills the edge and joins the faces on either side.

Does not work with one-sided edges. Re-indexes triangulation in the resulting face to maintain MN_MESH_FILLED_IN integrity. This routine also checks the resulting face for "dangling" edges: if two faces share a common boundary of 3 edges, and the middle edge is removed, the other two edges will actually have the same face on both sides. This is silly, so such edges are also removed & killed, reducing the degree of the face and adding a hidden vertex.

DllExport void EliminateCollinearVerts

(

)

This routine scans through a mesh from which invisible edges have been removed, looking for vertices that essentially seem to lie in the middle of edges.

Such "collinear vertices" actually lie between two edges that are parallel, with the same faces on either side, and with no other edges incident on them. These are easily removed, and if not removed, they can cause unpleasant artifacts in some tessellation algorithms.

The removal of these vertices consists of deleting them, merging the parallel edges into one (longer) edge, and correcting the faces on either side to have one less vertex and edge.

Note that this is essentially the opposite of the method SplitEdge.

DllExport void EliminateCoincidentVerts

(

float

thresh = MNEPS

)

This merges vertices that lie extremely close together, similar to what's done in Edit Mesh's Weld function, but it only affects vertices that are joined by an edge.

Another way of looking at it is that it uses weld to remove extremely small edges.

Parameters:

float thresh=MNEPS

This is the maximum length of an edge that will be welded away. The default value of MNEPS is defined in MNCommon.h to be .0001 – generally we use this to delete edges of more or less zero length.

void ClearVFlags ( DWORD  fl )

inline

Clears all specified flag bits in all MNVerts.

{ for (int i=0; i<numv; i++) v[i].ClearFlag (fl); }

void ClearEFlags ( DWORD  fl )

inline

Clears all specified flag bits in all MNEdges.

{ for (int i=0; i<nume; i++) e[i].ClearFlag (fl); }

void ClearFFlags ( DWORD  fl )

inline

Clears all specified flag bits in all MNFaces.

{ for (int i=0; i<numf; i++) f[i].ClearFlag (fl); }

DllExport void PaintFaceFlag	(	int	ff,
		DWORD	fl,
		DWORD	fenceflags = 0x0
	)

Recursively sets flag on given face and all faces connected to it.

Parameters:

int ff

The face to begin painting the face flag on.

DWORD fl

The flag to set on these faces.

DWORD fenceflags=0x0

If nonzero, this represents flags of edges that should not be crossed. In this way you can set up a "fence" of edges and set a particular face flag on all the faces within that fence.

DllExport int PropegateComponentFlags	(	int	slTo,
		DWORD	flTo,
		int	slFrom,
		DWORD	flFrom,
		bool	ampersand = FALSE,
		bool	set = TRUE
	)

This allows the developer to set flags in one type of component based on what the nearby flags of another type of component are.

For instance, you might want to set MN_TARG on all vertices that are used by faces with the MN_SEL flag set; that would be PropegateComponentFlags (MESH_VERTEX, MN_TARG, MESH_FACE, MN_SEL);

Another example:

PropegateComponentFlags (MNM_SL_OBJECT, MN_MESH_FILLED_IN, MNM_SL_EDGE, MN_DEAD, FALSE, FALSE);

This would clear the MN_MESH_FILLED_IN flag from the MNMesh if any of its MNEdges were dead.

Parameters:

DWORD slTo

The selection level of the components you wish to set. This would be one of MNM_SL_OBJECT, MNM_SL_VERTEX, MNM_SL_EDGE, or MNM_SL_FACE.

DWORD flTo

The flag to set.

DWORD slFrom

The selection level of the components you wish to base the selection upon. This would be one of MNM_SL_OBJECT, MNM_SL_VERTEX, MNM_SL_EDGE, or MNM_SL_FACE.

DWORD flFrom

The flag to test.

bool ampersand=FALSE

When slFrom and slTo are different, this indicates whether the flags of the nearby components should be "or'd" or "and'd". If it's false, then any flagged components in the "from" level will cause the component in the "to" level to be affected. If true, then all the components in the "from" level that touch a component in the "to" level must be flagged in order for the "to" level component to be affected. (i.e., if from is faces and to is vertices, a vertex would only be modified if all faces that use it have the flFrom flag set.)

bool set=TRUE

If TRUE (as would be usual) the slTo components have flags flTo set. If FALSE, these flags would be cleared instead.

Returns

Returns the number of slFrom components that tested positive for the flFrom flags. (If 0, nothing happened.)

DllExport void UpdateBackfacing	(	GraphicsWindow *	gw,
		bool	force
	)

Updates the MN_BACKFACING flag in all components based on the specified view.

Parameters:

GraphicsWindow *gw

A pointer to the current graphics window.

bool force

If the gw points to the same GraphicsWindow that it did last time this method was called, it doesn't necessarily need to update the flags. If force is true, it will update them anyway. (Useful if you think the GraphicsWindow perspective may have changed.)

DllExport void VertexSelect

(

const BitArray &

vsel

)

Selects or deselects the vertices as specified by on bits in the given bit array.

If the bit array size is smaller than the number of vertices then only those vertices in the bit array are modified.

Parameters:

const BitArray & vsel

Specifies which vertices to select or deselect.

DllExport void EdgeSelect

(

const BitArray &

esel

)

Selects or deselects the edges as specified by on bits in the given bit array.

If the bit array size is smaller than the number of edges then only those edges in the bit array are modified.

Parameters:

const BitArray & esel

Specifies which edges to select or deselect.

DllExport void FaceSelect

(

const BitArray &

fsel

)

Selects or deselects the faces as specified by on bits in the given bit array.

If the bit array size is smaller than the number of faces then only those faces in the bit array are modified.

Parameters:

const BitArray & fsel

Specifies which faces to select or deselect.

bool getVertexSel ( BitArray &  vsel )

inline

Fills the given bit array with the current vertex selection state.

Parameters:

BitArray & vsel

The results are stored here. Bits which are on indicate selected vertices.

{ return getVerticesByFlag (vsel, MN_SEL); }

bool getEdgeSel ( BitArray &  esel )

inline

Fills the given bit array with the current edge selection state.

Parameters:

BitArray & esel

The results are stored here. Bit which are on indicate selected edges.

{ return getEdgesByFlag (esel, MN_SEL); }

bool getFaceSel ( BitArray &  fsel )

inline

Fills the given bit array with the current face selection state.

Parameters:

BitArray & fsel

The results are stored here. Bit which are on indicate selected faces.

{ return getFacesByFlag (fsel, MN_SEL); }

DllExport void SelectEdgeLoop

(

BitArray &

edgeSel

)

Using the current edge selection this returns the original selection and the edge loop defined by those selections.

If you have 4 ordered edges connected to a vertex the edge loop is the opposing edge to the selected edge.

Parameters

edgeSel

An argument of type BitArray &.

DllExport void SelectEdgeRing

(

BitArray &

edgeSel

)

Using the current edge selection this returns the original selection and the ring loop defined by those selections.

Ring loop is defined as the opposing edge from the selected edge on a quad face.

Parameters

edgeSel

An argument of type BitArray &.

DllExport BitArray VertexTempSel	(	DWORD	fmask = MN_DEAD|MN_SEL,
		DWORD	fset = MN_SEL
	)

Gets the current vertex selection, based on the current selection level.

That is, if the current selection level is MNM_SL_VERTEX and the parameters are at their defaults, it'll return the current vertex selection, but if the selection level is MNM_SL_FACE, for instance, it'll return the vertices used by currently selected faces.

This method is used, e.g. in PolyObject::Deform to determine which vertices to affect by pipeline modifiers.

Parameters:

DWORD fmask=MN_DEAD|MN_SEL

Indicates the flags we're trying to match in the components at the current selection level.

DWORD fset=MN_SEL

Indicates which flags (from fmask) we want to see set. The default values mean "find components with MN_SEL set and MN_DEAD cleared".

DllExport bool getVerticesByFlag	(	BitArray &	vset,
		DWORD	flags,
		DWORD	fmask = 0x0
	)

Creates a BitArray of all vertices using the specified flags.

Parameters:

BitArray & vset

The BitArray which is filled in. vset is set to size numv.

DWORD flags

The flags to search for.

DWORD fmask=0x0

This optional parameter allows the user to look for particular combinations of on and off flags. For instance, if flags is MN_DEAD and fmask is 0, the method finds vertices with the MN_DEAD flag set. But if flags is MN_SEL and fmask is MN_SEL|MN_DEAD, it would find vertices that have MN_SEL set, but don't have MN_DEAD set.

DllExport bool getEdgesByFlag	(	BitArray &	eset,
		DWORD	flags,
		DWORD	fmask = 0x0
	)

Creates a BitArray of all edges using the specified flags.

Parameters:

BitArray & eset

The BitArray which is filled in. eset is set to size nume.

DWORD flags

The flags to search for.

DWORD fmask=0x0

This optional parameter allows the user to look for particular combinations of on and off flags. For instance, if flags is MN_DEAD and fmask is 0, the method finds edges with the MN_DEAD flag set. But if flags is MN_SEL and fmask is MN_SEL|MN_DEAD, it would find edges that have MN_SEL set, but don't have MN_DEAD set.

DllExport bool getFacesByFlag	(	BitArray &	fset,
		DWORD	flags,
		DWORD	fmask = 0x0
	)

Creates a BitArray of all faces using the specified flags.

Parameters:

BitArray & fset

The BitArray which is filled in. fset is set to size numf.

DWORD flags

The flags to search for.

DWORD fmask=0x0

This optional parameter allows the user to look for particular combinations of on and off flags. For instance, if flags is MN_DEAD and fmask is 0, the method finds faces with the MN_DEAD flag set. But if flags is MN_SEL and fmask is MN_SEL|MN_DEAD, it would find faces that have MN_SEL set, but don't have MN_DEAD set.

DllExport void ElementFromFace	(	int	ff,
		BitArray &	fset
	)

Sets bits for all faces in the same "element", or connected component, with face ff.

Faces already selected in fset will be considered "walls" for this processing and will not be evaluated. That is, if ff is not selected, but there's a ring of faces around it that is, the algorithm will stop at that ring.

Parameters:

int ff

The zero based index of the face.

BitArray & fset

The bits of the faces in the element are selected in this array.

DllExport void BorderFromEdge	(	int	ee,
		BitArray &	eset
	)

Takes a one-sided edge and sets the bits representing this edge's "border".

(All one-sided edges in MNMeshes can be grouped into chains, end to end, that represent boundaries of the mesh. For instance, in a box with one side deleted, all the one-sided edges are part of the chain that goes around the hole.

Parameters:

int ee

The edge to start looking from. (Note that edge ee should be one-sided - e[ee].f2 should be -1.

BitArray & eset

The bitarray to return the border's edge set in.

DllExport void SetEdgeVis	(	int	ee,
		BOOL	vis = TRUE
	)

This not only sets the edge's MN_EDGE_INVIS flag, it also sets the visedg state of the faces on either side.

This is the proper way to set edge visibility permanently, as the MNEdge flag will be lost if the edge list needs to be reconstructed.

Parameters:

int ee

The edge whose visibility should be set.

BOOL vis=TRUE

The desired visibility - TRUE for visible, FALSE for invisible.

DllExport void SetEdgeSel	(	int	ee,
		BOOL	sel = TRUE
	)

This not only sets the edge's MN_SEL flag, it also sets the edgsel state of the faces on either side.

This is the proper way to set edge selection permanently, as the MNEdge flag will be lost if the edge list needs to be reconstructed.

Parameters:

int ee

The edge whose selection state should be set.

BOOL sel=TRUE

The desired selection state.

void SetFromTri ( const Mesh &  from )

inline

Clears out all current information, and copies in new faces and vertices from the from argument.

{ Clear (); AddTri (from); }

DllExport void AddTri

(

const Mesh &

from

)

Adds vertices and faces in "from" to current MNMesh.

This algorithm has O(N) complexity.

DllExport void OutToTri

(

Mesh &

tmesh

)

Outputs current MNMesh into the mesh given.

Note that even if the MNMesh was originally taken from this Mesh, the internal processing may have changed PART_TOPO, PART_GEOM, PART_SELECT, PART_MAPPING, or PART_VERTCOLOR. This algorithm has O(N) complexity.

DllExport void FillInMesh

(

)

If this mesh does not have the MN_MESH_FILLED_IN flag, this method completely recomputes all combinatorial information.

It re-creates all MNEdges and MNFace::edg, MNVert::edg, and MNVert::fac lists based on the information in the MNFace::vtx lists.

Since this routine completely reconstructs the combinatorics, it clears the MN_MESH_VERTS_ORDERED flag. Complexity of O(N).

DllExport void FillInFaceEdges

(

)

Fills in the faces' edge arrays based on the edge list.

Complexity of O(N).

DllExport void FillInVertEdgesFaces

(

)

Fills in the vertex edge and face lists based on the edge list.

Complexity of O(N).

DllExport bool EliminateBadVerts	(	DWORD	flag = 0,
		bool	doNullEdgeCheck = true
	)

A "bad" vertex in this context is one which is shared between two distinct boundaries for this mesh.

As an example, imagine a union between two circles, converted to meshes, that touch at a single vertex. This causes a vertex to exist which is on two faces, but four edges. Since most vertices are on equal numbers of faces and edges (if they're not on a boundary) or on one more edge than face (if they are on a boundary), these types of vertices can mess up some forms of processing. This method eliminates such vertices by duplicating them, assigning one vertex to each boundary. A MNMesh that has gone through this method will have the MN_MESH_NO_BAD_VERTS flag set until a method (such as NewFace) is called that could conceivably create bad vertices.

EliminateBadVerts requires a filled in mesh, and will call FillInMesh if the MN_MESH_FILLED_IN flag is not set.

Parameters:

DWORD flag:

This parameter is available in release 4.0 and later only.

If nonzero, it indicates that only flagged vertices should be split up if "bad". bool doNullEdgeCheck:

When true, this function calls EliminateNullEdges before processing vertices, as such edges can confuse the algorithm.

Returns

False if nothing changed, true if at least one bad vertex was found and split.

DllExport bool EliminateNullEdges

(

)

Eliminates from the mesh any "null" edges, defined as edges with identical start and end vertices.

In particular, RemoveNullEdges is called for each face of the mesh, and if any edges are identified, they are removed from their vertex edge list and flagged as MN_DEAD. The corresponding duplicate vertices are also removed from the related MNMapFace entities. As EliminateBadVerts may have previously introduced improper split vertices as a result of null edges, if any null edges are identified, then all vedg and vfac lists are checks against face edge lists and edge face lists for consistency. If inconsistencies are found, then they are remdiated by re-unifying split vertices, and flagging the superfluous copies as MN_DEAD. Note that EliminateNullEdges has no effect if null edge checks have been disabled via the MN_MESH_DIASBLE_NULL_EDGE_CHECK flag.

Returns

Returns a flag indicating whether any null edges were identified.

DllExport void OrderVerts

(

)

This routine organizes the face and edge lists of each vertex such that going counterclockwise around the vertex (with the surface normal pointing up), you'll encounter edg[0], fac[0], edg[1], fac[1], etc, ending in either the last face if the vertex is not on a boundary or the last edge if the vertex is on a boundary.

(If the vertex is on a boundary, the first & last edges are part of that boundary.)

OrderVerts requires a filled-in mesh with no bad vertices, so it will call FillInMesh and/or EliminateBadVerts as needed.

DllExport void OrderVert

(

int

vid

)

This routine organizes the face and edge lists of the specified vertex such that going counterclockwise around the vertex (with the surface normal pointing towards you), you'll encounter edg[0], fac[0], edg[1], fac[1], etc, ending in either the last face if the vertex is not on a boundary or the last edge if the vertex is on a boundary.

(If the vertex is on a boundary, the first & last edges are part of that boundary.)

NOTE: OrderVert requires a filled-in mesh with no "bad" vertices. Failing to adequately prepare your mesh may result in a crash. (See the methods FillInMesh and EliminateBadVerts for details.)

DllExport void Triangulate

(

)

Converts a MN_MESH_NONTRI mesh, with polygon faces and possibly hidden vertices, into a completely triangulated mesh, wherein all faces have degree 3.

This routine is called from OutToTri if the MN_MESH_NONTRI flag is set. Has complexity O(N)

DllExport void TriangulateFace

(

int

ff

)

Triangulates the specified face, splitting it into as many faces as are needed (deg-2+hdeg*2) to represent all the triangles.

Has complexity of O(N) where N is the number of triangles.

Parameters:

int ff

Specifies the face to triangulate.

DllExport int DivideFace	(	int	ff,
		Tab< float > &	bary
	)

Divides a face by creating a point in the face's interior and creating an edge from that point to each of the face's vertices.

An n-gon becomes n triangles by this method.

Parameters:

int ff

The face to divide.

Tab<float> & bary

The generalized barycentric coordinates of the point that should be created. (See FacePointBary for details on barycentric coordinates.)

Returns

The index of the newly created vertex, or -1 if there's an error.

DllExport int DivideFace_2015	(	int	ff,
		Tab< float > &	bary
	)

Identical to DivideFace but should only be used to load parametric divides for file 2015 and lower.

DllExport void FaceBBox	(	int	ff,
		Box3 &	bbox
	)

Finds the bounding box of all vertices and hidden vertices used by face ff.

DllExport void BBox	(	Box3 &	bbox,
		bool	targonly = FALSE
	)

Calculates the bounding box of the vertices & hidden vertices of this mesh.

Parameters:

Box3 & bbox

The computed bounding box is placed here.

bool targonly

If this is TRUE, only targeted vertices are used to compute the bounding box. Hidden vertices, which are also normally used, will be ignored in this case, since they cannot be targeted.

DllExport Box3 getBoundingBox	(	Matrix3 *	tm = NULL,
		bool	targonly = FALSE
	)

Retrieves a bounding box for the MNMesh.

Parameters:

Matrix3 *tm

Like the corresponding method in class Mesh, this method takes an optional transform, so the user can get a bounding box in any desired space (with a slower calculation, as all the points must be transformed).

bool targonly

If set, only vertices with the MN_TARG flag set are used to compute the bounding box.

DllExport int TargetVertsBySelection

(

int

iSelLevel

)

Sets vertex MN_TARG flags based on the existing MN_SEL flags.

Parameters:

int iSelLevel

Specifies which components to check for MN_SEL flags. If selLevel is MNM_SL_OBJECT, all vertices are targeted. If selLevel is MNM_SL_VERTEX, the vertices with MN_SEL flags set also have their MN_TARG flags set. If selLevel is MNM_SL_FACE or MNM_SL_EDGE, vertices that touch selected faces or edges, respectively, have their MN_TARG flags set. This is algorithm has O(N) complexity.

Returns

The (highly) approximate number of targeted vertices.

DllExport int TargetEdgesBySelection

(

int

iSelLevel

)

Sets edge MN_TARG flags based on the existing MN_SEL flags.

Parameters:

int iSelLevel

Specifies which components to check for MN_SEL flags. If selLevel is MNM_SL_OBJECT, all edges are targeted. If selLevel is MNM_SL_EDGE, the edges with MN_SEL flags set also have their MN_TARG flags set. If selLevel is MNM_SL_FACE or MNM_SL_VERTEX, edges that touch selected faces or vertices, respectively, have their MN_TARG flags set.

Returns

The (highly) approximate number of targeted edges.

DllExport int TargetFacesBySelection

(

int

iSelLevel

)

Sets face MN_TARG flags based on the existing MN_SEL flags.

Parameters:

int iSelLevel

Specifies which components to check for MN_SEL flags. If selLevel is MNM_SL_OBJECT, all faces are targeted. If selLevel is MNM_SL_FACE, the faces with MN_SEL flags set also have their MN_TARG flags set. If selLevel is MNM_SL_EDGE or MNM_SL_VERTEX, faces that touch selected edges or vertices, respectively, have their MN_TARG flags set. This algorithm has O(N) complexity.

Returns

The (highly) approximate number of targeted faces.

DllExport void DetargetVertsBySharpness

(

float

sharpval

)

Clears the MN_TARG flag on vertices representing relatively flat areas, keeping the flag on vertices at sharper corners.

The purpose of this method is to avoid working on smooth areas of the mesh in, for instance, tessellation algorithms which are designed to smooth an area. An example of this is the sharpness option in 3ds Max's MeshSmooth modifier, although the parameter there is 1.0 - this value.

Note that this method requires filled in geometry and ordered vertices, and will call FillInMesh and OrderVerts as needed. This algorithm has complexity O(N*deg).

Parameters:

float sharpval

The threshold for determining whether a vertex is sharp enough to continue being targeted. A value of 0 indicates that all vertices are sharp enough; a value of 1 would de-target all vertices. The actual determination is made by comparing the dot product of any two consecutive face normals is less that 1 - 2*sharpval.

The following "fence" methods are useful for algorithms such as SabinDoo wherein you don't want to mix faces with different characteristics.

DllExport void ComputeCenters	(	Point3 *	ctr,
		bool	targonly = FALSE
	)

Finds the centers of all the faces, using repeated calls to ComputeCenter.

Parameters:

Point3 *ctr

An array of at least FNum() points for storing the centers.

bool targonly

If this is TRUE, centers will only be computed for targeted faces. (The rest of the ctr array will remain unmodified.)

DllExport void ComputeCenter	(	int	ff,
		Point3 &	ctr
	)

Finds the center of face ff by finding the average of all its vertices.

DllExport void ComputeNormal	(	int	ff,
		Point3 &	normal,
		Point3 *	ctr = NULL
	)

Computes a "balanced" normal, in that the normal takes the contribution of all vertices equally.

(This is significant in the case of nonplanar polygons.)

Parameters:

int ff

The face you want the normal of.

Point3 & N

The place to store the computed normal.

Point3 *ctr

If not NULL, it points to a place where ComputeNormal should put the face center.

DllExport void ComputeSafeCenters	(	Point3 *	ctr,
		bool	targonly = FALSE,
		bool	detarg = FALSE
	)

Finds the "safe" centers of all the faces, using repeated calls to ComputeSafeCenter.

Parameters:

Point3 *ctr

An array of at least FNum() points for storing the centers.

bool targonly

If this is TRUE, centers will only be computed for targeted faces. (The rest of the ctr array will remain unmodified.)

bool detarg

If TRUE, this will remove the MN_TARG flag from faces where safe centers could not be found.

DllExport bool ComputeSafeCenter	(	int	ff,
		Point3 &	ctr
	)

Finds the "safe" center of face ff, if possible.

For non-convex faces, the average point found in ComputeCenter is unsuitable for some applications because it can lie outside the face completely, or in a region where it cannot "see" all the faces' vertices. (I.e., line segments from the center to the corner pass outside of the face.)

This routine provides a better solution in some cases by finding the center of the convex hull of the face. The convex hull is defined as the region in a face with a clear line-of-sight to all the corners. Some faces, such as the top face in an extruded letter M, have an empty convex hull, in which case this routine fails and merely provides the regular center given by ComputeCenter. This algorithm has complexity of O(deg^2).

Returns

Returns TRUE if a safe center was found, FALSE if no such center could be found.

DllExport void RetriangulateFace

(

int

ff

)

Throws out the current triangulation for face ff and computes a new one.

Note that hidden vertices that actually fall outside of the region of the face will be thrown out during this routine, since they cannot be incorporated into any triangulation and don't make sense anyway.

DllExport void FindDiagonals	(	int	ff,
		int *	diag
	)

Finds a diagonal of face ff that does not include any hidden vertices.

This can be used with the method FindFacePointTri to get a sub-triangle and barycentric coordinates for a hidden vertex, so that vertex can be kept in the face when the non-hidden vertices are moved in some way.

Parameters:

int ff

The face to get an external diagonal of.

int *diag

An array of at least (F(ff)->deg-2)*3 elements to store the diagonals in.

DllExport void FindDiagonals	(	int	deg,
		int *	vv,
		int *	diag
	)

This method finds diagonals for this sequence of vertices, creating a triangulation for the polygon they form.

Parameters:

int deg

The number of vertices in the sequence.

int *vv

The array of vertices.

int *diag

A pointer to an array of size (deg-3)*2 where the diagonals can be put.

DllExport void BestConvexDiagonals	(	int	ff,
		int *	diag = NULL
	)

If the given face is convex, this will often produce a better diagonals than RetriangulateFace would.

The diagonals are less likely to overuse any single vertex. The face is not checked for convexity, but if it is not convex the diagonals produced will probably be self-overlapping.

Parameters:

int ff

The face to find a diagonal for.

int *diag=NULL

If NULL, the new diagonals are put into the face's tri array. If this tri is non-NULL, the diagonals are put here instead. Be sure that tri is allocated with space for at least (deg-2+hdeg)*3 elements.

DllExport void BestConvexDiagonals	(	int	deg,
		int *	vv,
		int *	diag
	)

Uses a triangulation scheme optimized for convex polygons to find a set of diagonals for this sequence of vertices, creating a triangulation for the polygon they form.

Parameters:

int deg

The number of vertices in the sequence.

int *vv

The array of vertices.

int *diag

A pointer to an array of size (deg-3)*2 where the diagonals can be put.

DllExport bool SetDiagonal	(	int	ff,
		int	d1,
		int	d2
	)

DllExport void MakePolyMesh	(	int	maxdeg = 0,
		BOOL	elimCollin = TRUE
	)

Unifies triangles into polygons across invisible edges.

Turns a mesh with triangle faces into a mesh with (fewer) polygon faces by removing all hidden edges. This method can take unusually long if there are faces of ridiculously high degree, such as the top of a cylinder with 200 sides but only 1 cap segment. (It can be up to an n-squared routine where n is the number of invisible edges removed to make a given face.)

This routine is essentially a bunch of calls to RemoveEdge(), followed by a call to EliminateCollinearVerts().

DllExport void MakeConvexPolyMesh

(

int

maxdeg = 0

)

Turns a mesh with triangle faces into a mesh with (fewer) convex polygon faces by removing all hidden edges that aren't necessary to maintain convexity.

As of the 2.5 release this method has not been thoroughly tested to ensure that the result is indeed always convex and that it doesn't leave edges that should ideally be removed. Therefore a call to MakeConvex is recommended after use. What we can say about it is that it will not produce any hidden vertices, as MakePolyMesh does, and that if you're going to use MakeConvex anyway, MakeConvexPolyMesh and MakeConvex are more efficient than MakePolyMesh and MakeConvex are.

MakeConvex essentially undoes a lot of the work done by MakePolyMesh. MakeConvexPolyMesh gives it much less (if anything) to undo.

DllExport int FindEdgeFromVertToVert	(	int	vrt1,
		int	vrt2
	)

Some of these methods do not make use of user-specified normals or smoothing groups.

Finds an edge connecting these two vertices, if one exists. This algorithm is relatively fast, since it just checks the edges in V(vrt1)'s edge list. However, it requires that the MNMesh be filled in, and it WILL call the much slower FillInMesh routine if the MN_MESH_FILLED_IN flag is not set.

Returns

The index of the desired edge, or -1 if no such edge could be found.

DllExport void GetVertexSpace	(	int	vrt,
		Matrix3 &	tm
	)

Chooses a suitable "local space", and sets tm's rotation to match that space.

Does not set tm's translation component. (This is easily done by setting tm.SetRow (3, v[vrt].p).)

The purpose of this method is to support a consistent definition of "local space" around a given vertex. As usual, Z comes from the local normal; the X direction is chosen to be a particular edge, but then this direction is modified to balance the contribution of the other edges. (Thus it points roughly in the direction of one edge, but moving other edges' far endpoints will rotate which way is considered "X" just as much as moving that edge will.)

Parameters:

int vrt

The vertex index.

Matrix3 & tm

The transformation matrix. Chooses a suitable "local space", and sets tm's rotation to match that space. Does not set tm's translation component. This is easily done by setting tm.SetRow (3, v[vrt].p).

Parameters:

int vrt

The vertex index.

Matrix3 & tm

The transformation matrix.

DllExport Point3 GetVertexNormal

(

int

vrt

)

Returns the surface normal at the vertex vrt.

It computes the normal by taking the average of the face normals from faces that V(vrt) is on, weighted by the angles of the vrt corners of each of those faces. That is, if vrt is at a very acute angle on one face, but a very obtuse angle on the next, the face with the obtuse vrt corner will count much more heavily. The return value has a length of 1.

This normal is not related to the normals used in rendering.

DllExport Point3 GetEdgeNormal

(

int

edgeIndex

)

Returns the surface normal at the edge edgeIndex.

This is just the average of the face normals on either side, or, if this is an edge with only one face, it's just that face's normal. The return value has a length of 1.

This normal is not related to the normals used in rendering.

DllExport Point3 GetFaceNormal	(	int	fc,
		bool	nrmlz = FALSE
	)

Returns the surface normal of face fc.

If this face has degree 3, this is the same as the regular 3ds Max normal for this face. However, if the face is more complex, the normal may not be the same as the ones for the component triangles.

Parameters:

int fc

The index of the face to find the normal for.

bool nrmlz

Whether or not to scale the result to length 1. If this is FALSE, the length of the return value corresponds (in planar faces) to the area of the face, times 2.

Point3 GetEdgeNormal ( int  vrt1, int  vrt2  )

inline

This merely combines GetEdgeNormal (int ed) with FindEdge (int vrt1, int vrt2).

It returns the normal of the edge connecting vrt1 to vrt2, if such an edge can be found. (If there is no such edge, it returns Point3(0.0f, 0.0f, 0.0f).)

{ return GetEdgeNormal (FindEdgeFromVertToVert(vrt1, vrt2)); }

DllExport float EdgeAngle

(

int

edgeIndex

)

Computes the angle at the given edge.

(In other words, the angle between the planes of the faces on either side.) Note that in the case of nonplanar polygons, these planes are the "average" planes for the polygon, not the plane of the triangle nearest the edge.

Parameters:

int edgeIndex

The edge index.

Returns

The angle in radians.

DllExport void FlipNormal

(

int

faceIndex

)

Flips the normal of the specified face, as well as the corresponding map faces in active maps.

Note that doing this on an isolated face with neighbors will cause an illegal condition. Use the FlipElementNormals method to safely and completely flip the normals of entire elements to avoid this problem.

This method uses the MNFace and MNMapFace methods "Flip", which changes the order of the vertices from (0,1,2...,deg-1) to (0, deg-1, deg-2,...1) and rearrange the edge and diagonal information accordingly.

Parameters:

int faceIndex

The face index. This method flips the normal of the indicated face. This is done by reordering the vertices. The faces for any assigned texture map is handled as well.

Parameters:

int faceIndex

The index of the face for which to flip the normal.

DllExport void checkNormals

(

BOOL

illum

)

This method can be used to build the normals and allocate RVert space only if necessary.

This is a very inexpensive call if the normals are already calculated. When illum is FALSE, only the RVerts allocation is checked (since normals aren't needed for non-illum rendering). When illum is TRUE, normals will also be built, if they aren't already. So, to make sure normals are built, call this with illum=TRUE.

Parameters:

BOOL illum

If TRUE normals are built. If FALSE only the RVert array is allocated.

DllExport void buildNormals

(

)

This method resolves the normals on the RVertex array.

If the MNMesh already has normals prescribed on each vertex, the normal is just moved to the RVertex array. See Class RVertex and Class RNormal.

If you are creating or modifying a MNMesh, after you are done specifying all the vertices and faces, this method should be called. This allocates the RVertex and RNormal database for the MNMesh. This will allow you to query the MNMesh and ask about normals on the vertices.

This method also builds the face normals for the mesh if needed.

DllExport void buildRenderNormals

(

)

This method is similar to buildNormals() above, but ignores the material index (mtlIndex).

In other words, the difference between this and buildNormals() is that it doesn't look at the mtlIndex of the faces: normals of faces with the same smoothing group are averaged regardless.

DllExport bool FlipElementNormals

(

DWORD

flag = MN_SEL

)

Flips the normals of the specified elements in the mesh.

Parameters:

DWORD flag=MN_SEL

Indicates which elements should be flipped, in the following way: any element that has at least one flagged face is completely flipped. Elements without any flagged faces are not.

Returns

Returns true if anything was flipped, false otherwise.

DllExport bool FlipFaceNormals

(

DWORD

faceFlag

)

This flips the face normals of the tagged faces and also reverses the face winding.

DllExport void Resmooth	(	bool	smooth = TRUE,
		bool	targonly = FALSE,
		DWORD	targmask = ~0x0
	)

Applies new smoothing (or removes smoothing groups) from selected areas of the MNMesh.

With the default parameters, it smooths all faces with the same group.

Parameters:

bool smooth

If TRUE, Resmooth will generate a new smoothing group (using GetNewSmGroup) to apply to the relevant faces. All smoothing groups previously assigned to the faces will be removed. If FALSE, Resmooth will strip all smoothing groups, leaving the faces faceted.

bool targonly

If TRUE, Resmooth will not affect faces that are do not have the MN_TARG flag set.

DWORD targmask

Resmooth will only affect faces whose smoothing groups are included in targmask. Some examples: with the default value of ~0x0, this is no restriction at all. With a value of 0, Resmooth will only affect faces that previously had no smoothing group assigned. With a value of 0x02, Resmooth will only affect faces that either had smoothing group 2 (and nothing else) or no smoothing group.

Note: if targonly is TRUE and targmask is not at the default, a face must both be targeted and have its smoothing groups fall into targmask in order to be affected.

DllExport DWORD CommonSmoothing

(

bool

targonly = FALSE

)

Finds what smoothing groups, if any, are common to all faces in this MNMesh.

Parameters:

bool targonly

If this is TRUE, this routine will find smoothing groups that are common to all faces with MN_TARG set, ignoring the rest.

DllExport DWORD GetNewSmGroup

(

bool

targonly = FALSE

)

Produces a single smoothing group that is not currently used in the MNMesh.

If this is impossible because all smoothing groups are used (a rare condition), it produces the least commonly used group.

Parameters:

bool targonly

If TRUE, this routine will find a smoothing group not used by any of the faces with MN_TARG set. If this is impossible because all smoothing groups are used in targeted faces, it produces the least commonly used group.

DllExport MtlID GetNewMtlID

(

bool

targonly = FALSE

)

Produces the lowest material ID not used in any faces in the MNMesh.

Parameters:

bool targonly

If TRUE, this routine will instead find the lowest material ID not used in the targeted faces of this MNMesh.

DllExport DWORD GetOldSmGroup

(

bool

targonly = FALSE

)

Returns a smoothing group that is currently used somewhere in the mesh, or returns zero if all faces have no smoothing.

Parameters:

bool targonly

If TRUE, this routine will find a smoothing group used in one of the targeted faces, or return zero if all targeted faces have no smoothing.

DllExport DWORD GetAllSmGroups

(

bool

targonly = FALSE

)

Find all smoothing groups used in this mesh.

Parameters:

bool targonly=FALSE

If TRUE, this method will return only smoothing groups set in targeted faces, i.e. those with the MN_TARG flag set.

Returns

The return value is a DWORD with every used smoothing bit set.

DllExport DWORD FindReplacementSmGroup	(	int	ff,
		DWORD	os
	)

Finds available smoothing groups you can use to replace the given smoothing group without messing up the mesh's shading.

This method recursively looks at the entire region of faces sharing this smoother with this face, and it finds all smoothing groups used by neighboring faces. Then it returns the bits which are not used by any of them.

This is useful if, for instance, you want to attach two separate mesh components, but you don't want smooth shading across the join. It's used internally by SeparateSmGroups.

Parameters:

int ff

The face to start the examination on.

DWORD os

The old smoothing group you wish to replace.

Returns

All bits that are available to replace the old smoothing group with.

DllExport void PaintNewSmGroup	(	int	ff,
		DWORD	os,
		DWORD	ns
	)

Recursively replaces the old smoothing group with the new smoothing group.

The recursion traverses all faces with the old smoother that share an edge or a vertex.

Parameters:

int ff

The face to begin the replacement on

DWORD os

The old smoothing group

DWORD ns

The new smoothing group

DllExport bool SeparateSmGroups	(	int	v1,
		int	v2
	)

Changes the smoothing groups on faces using v2 so that they are distinct from any smoothing groups on faces using v1.

This is used, for instance, in joining the seam between the operands MakeBoolean. Before welding each pair of vertices, this method is called to prevent smoothing across the boolean seam.

Returns

If, due to overuse of the 32 smoothing groups, the algorithm can't find enough new ones to replace the overlapping smoothing groups around v2, it will do the best it can and return FALSE. If it succeeds, it returns TRUE.

DllExport void AutoSmooth	(	float	angle,
		BOOL	useSel,
		BOOL	preventIndirectSmoothing
	)

Applies new smoothing groups to the whole mesh or to selected faces based on angles between faces.

Parameters:

float angle

The threshold angle in radians. Edges with angles above this amount will not be smoothed across.

BOOL useSel

Indicates if the auto-smoothing should be done only on selected faces.

BOOL preventIndirectSmoothing

Sometimes even though two neighboring faces are more than "angle" apart, there may be a path from one to the other via other faces, crossing only edges that are less than "angle" apart, so they'll wind up sharing the same smoothing group anyway. To prevent this sort of "indirect" smoothing, set this value to TRUE. This method performs an auto smooth on the mesh, setting the smoothing groups based on the surface normals.

Parameters:

float angle

The minimum angle between surface normals for smoothing to be applied, in radians.

BOOL useSel

If TRUE only the selected faces are smoothed.

BOOL preventIndirectSmoothing=FALSE

TRUE to turn on; FALSE to leave off. This matches the option in the Smooth Modifier UI – use this to prevent smoothing 'leaks" when using this method. If you use this method, and portions of the mesh that should not be smoothed become smoothed, then try this option to see if it will correct the problem. Note that the problem it corrects is rare, and that checking this slows the Auto Smooth process.

DllExport DWORD FindAvailableSmoothingGroups	(	int	faceIndex,
		DWORD	excludeSmoothing = 0
	)

Return a DWORD of smoothing groups that a face can use without smoothing to any adjacent face (either across shared edges or shared vertices).

Parameters

faceIndex	The index of the face to check
excludeSmoothing	A bit mask with a bit set for each smoothing group to exclude from the returned smoothing groups.

Returns

A DWORD containing a bit for each available smoothing group. 0 indicates that none are available.

DllExport DWORD FindAvailableSmoothingGroupFromFaceList	(	IntTab	faceList,
		DWORD	excludeSmoothing = 0
	)

Return a DWORD containing the lowest-order smoothing group that a list of faces can use without smoothing to any adjacent face (either across shared edges or shared vertices).

Parameters

faceList	An IntTab of face indexes to check
excludeSmoothing	A bit mask with a bit set for each smoothing group to exclude from the returned smoothing groups.

Returns

A DWORD containing a bit for each available smoothing group. 0 indicates that none are available.

DllExport bool OptimizeSmoothingGroups

(

BitArray

optimizeFaces

)

Process the specified faces and eliminate any redundant smoothing group usage.

Parameters

optimizeFaces

A BitArray containing numf bits with a bit set for each face that should be processed.

Returns

true if smoothing groups were altered, false if no smoothing group alteration occurred.

DllExport void FenceMaterials

(

)

These methods make fences for the MNMesh::SabinDoo() algorithm.

They set NOCROSS flags and deleting INVIS flags. Sets the MN_EDGE_NOCROSS flag on all edges that lie between faces with different material IDs.

DllExport void FenceSmGroups

(

)

Sets the MN_EDGE_NOCROSS flag on all edges that lie between faces with exclusive smoothing groups.

DllExport void FenceFaceSel

(

)

Sets the MN_EDGE_NOCROSS flag on all edges that lie between selected & non-selected faces.

(This checks the MN_SEL, not the MN_TARG, flags on the faces.)

DllExport void FenceOneSidedEdges

(

)

Sets the MN_EDGE_NOCROSS flag on all edges that are on the boundary.

DllExport void FenceNonPlanarEdges	(	float	thresh = .9999f,
		bool	makevis = FALSE
	)

Sets MN_EDGE_NOCROSS flags on edges between faces that aren't in the same plane.

Parameters:

float thresh=.9999f

This is the threshold used to determine if two adjacent faces have the same normals, i.e. lie in the same plane. If the dot product between the normals is less than thresh, they are considered different, otherwise they're considered the same. The threshold angle between faces is the arc cosine of this amount, so for instance to set a threshold angle of .5 degrees, you would call FenceNonPlanarEdges with a thresh of cos(.5*PI/180.). The default value is equivalent to about .81 degrees.

bool makevis=FALSE

Indicates whether nonplanar edges should be made visible, i.e. have their MN_EDGE_INVIS flag cleared. (This is sometimes done before MakePolyMesh, so it can be used to influence whether nonplanar faces are joined together.)

DllExport void SetMapSeamFlags

(

)

Sets the MN_EDGE_MAP_SEAM on all edges that are "seams" for any active map(s).

A map seam is an edge where the faces on either side use different mapping vertices for at least one end.

DllExport void SetMapSeamFlags

(

int

mapChannel

)

Sets the MN_EDGE_MAP_SEAM on all edges that are "seams" for the specified map(s).

A map seam is an edge where the faces on either side use different mapping vertices for at least one end.

Parameters:

int mp

The map to use to set the seams. If left at the default -1, it'll check all active maps.

DllExport int FindFacePointTri	(	int	ff,
		Point3 &	pt,
		double *	bary,
		int *	tri
	)

Finds the sub-triangle and (optionally) barycentric coordinates within that triangle of a point that lies on this face.

For faces that are not themselves triangles, this helps in particular to create mapping coordinates or vertex colors for new points on this face. To use this method, you must now call MNFace::GetTriangles to get a triangle table, then pass the contents of that table to this method. Note that the optional size of the triangulation array was removed; this is assumed to be (f[ff].deg-2)*3.

Parameters:

int ff

The face.

Point3 & pt

The point.

double *bary

An array of 3 double-precision values to store the barycentric coordinates in. If this is NULL, barycentric coordinates are not computed.

int *tri

An optional alternative triangulation, such as that produced by FindExternalTriangulation. (If NULL, the face's regular triangulation is used.)

Returns

3 times the index of the triangle the point is found in, or -1 if this point doesn't seem to lie on this face. That is, if this point is found in the triangle represented by tri[6], tri[7], and tri[8], this routine will return 6.

DllExport UVVert FindFacePointMapValue	(	int	ff,
		Point3 &	pt,
		int	mapChannel
	)

This method is available in release 3.0 and later only.

It's the generalized version of the old FindFacePointCV and FindFacePointTV.

Uses FindFacePointTri and the mapping coordinates of the endpoints of the relevant triangle to compute a map vertex corresponding to the point pt. If the point is not on face ff, UVVert (0,0,0) is returned.

This method is useful e.g. for getting map coordinates to match a new vertex when dividing up a face.

Parameters:

int ff

The face to find map coordinates on.

Point3 & pt

The point (lying on the face) to find map coordinates for.

int mp

The map channel to get map coordinates in.

DllExport void GetBorder	(	MNMeshBorder &	brd,
		int	selLevelType = MNM_SL_OBJECT,
		DWORD	targetFlag = MN_SEL
	)

Finds border loops composed of all one-sided edges.

(One-sided edges on a mesh must necessarily be organizable into closed loops along the borders of the mesh.)

Parameters:

MNMeshBorder & brd

The class in which to put the border loops. See Class MNMeshBorder for details.

DWORD targetFlag

The selection level in the mesh to use to decide whether the border loops are targeted or not. For instance, with the default MNM_SL_OBJECT, all border loops are targeted, but with a value of MNM_SL_VERTEX, only those border loops containing at least one selected vertex will be targeted. Same for MNM_SL_EDGE. For MNM_SL_FACE, those loops touching at least one selected face will be targeted.

DllExport void FillInBorders

(

MNMeshBorder *

b = NULL

)

Fills in all the borders of a mesh.

This is what the 3ds Max CapHoles modifier does. It creates new faces on the other side of each of the loops.

Parameters:

MNMeshBorder *b

If this is NULL, FillInBorders finds all the borders with a call to GetBorders. If you have already found the borders, however, you can save time by passing a pointer to the MNMeshBorder class here. (This is especially convenient if you wish to modify the border targeting; only targeted borders are filled in.)

DllExport void FindOpenRegions

(

)

Scans mesh to determine what parts of it are open or closed.

Consider a "submesh" to be one connected components of faces and edges. Each submesh is open if it has any holes, i.e. if there's at least one edge which has only one face. (The hole is on the other side.) A submesh is closed if it doesn't have any. This method sets the MN_FACE_OPEN_REGION flag on all faces in open submeshes, and sets the MN_MESH_HAS_VOLUME flag if at least one submesh is closed.

Examples:

A 3ds Max box has one submesh, itself, and it is closed.

A 3ds Max teapot has four distinct submeshes (handle, spout, lid, and body), and they are all open.

DllExport BOOL CheckForDoubledMappingVerts

(

)

This method is a debugging tool.

All doubled mapped vertexes are DebugPrinted. Return value is TRUE if there is at least one doubled mapping vertex (on at least one map channel). FALSE if the mesh is clean. Note that this method is not significantly faster than EliminateDoubledMappingVerts, so you should not use it to determine if EliminateDoubledMappingVerts

DllExport void EliminateDoubledMappingVerts

(

)

Eliminates double mapped vertices in linear time.

DllExport void EliminateIsoMapVerts

(

)

Deletes isolated mapping vertices.

DllExport void EliminateIsoMapVerts

(

int

mapChannel

)

Deletes isolated mapping vertices on a specific channel.

DllExport MNMesh& operator=

(

const MNMesh &

from

)

Assignment operator.

Allocates space & copies over all data from "from".

DllExport MNMesh& operator+=

(

const MNMesh &

from

)

Union operator.

Adds all data from "from" to this MNMesh. Flags MN_MESH_NONTRI and MN_MESH_RATSNEST are or'd together, while flags MN_MESH_FILLED_IN, MN_MESH_NO_BAD_VERTS, and MN_MESH_VERTS_ORDERED are and'd together. (Uniting a rat's nest with a non-rat's nest makes a rat's nest, but uniting a mesh with mapping coordinates and one without makes one without.)

DllExport void MNDebugPrint

(

bool

triprint = FALSE

)

DllExport void MNDebugPrintVertexNeighborhood	(	int	vv,
		bool	triprint = FALSE
	)

Uses DebugPrint to print out information about all the edges, faces, and vertices in the immediate vicinity of vertex vv.

Parameters:

int vv

The vertex whose information is output.

bool triprint=FALSE

Controls whether or not triangulation information is printed out for each face. Usually this information isn't desired.

DllExport bool CheckAllData

(

)

Thoroughly checks a MNMesh to make sure that no components refer to dead components; that when one component refers to another, the other refers back to the first; and that orientation is correctly matched between faces and edges.

If everything checks out, TRUE is returned. If any errors are detected, DebugPrint is used to send a message to the DevStudio Debug Results window and FALSE is returned. Be careful not to leave CheckAllData calls in your final build; they will slow down your effect to no purpose.

Here is the sort of debug output you can expect. CheckAllData always outputs one of the following messages:

Checking all data in filled-in MNMesh: (if the mesh has the MN_MESH_FILLED_IN flag set)

Checking all data in MNMesh: (if the mesh does not)

These errors will be detected for any mesh:

Face d has an out-of-range vertex: d

Face d has an out-of-range tvert: d

Face d has an out-of-range cvert: d

Face d refs dead edge d.

Face d has bad triangulation index: d

These errors will be detected only for filled-in meshes:

Face d has an out-of-range edge: d

Face d uses dead edge d.

Face d refs edge d, but edge doesn't ref face.

Face d refs edge d from vert d to vert d, but edge doesn't go there.

Orientation mismatch between face d and edge d.

Face d refs vertex d, but vertex doesn't ref face.

Edge d refs dead vertex d.

Edge d refs vertex d, but vertex doesn't ref edge.

Edge d has no face-1

Edge d refs dead face d.

Edge d refs face d, but face doesn't ref edge.

Vertex d refs dead edge d.

Vertex d refs edge d, but edge doesn't ref vertex.

Vertex d references more faces than edges.

Vertex d refs dead face d.

Vertex d refs face d, but face doesn't ref vertex.

DllExport int SplitTriEdge	(	int	ee,
		float	prop = .5f,
		float	thresh = MNEPS,
		bool	neVis = TRUE,
		bool	neSel = FALSE
	)

Creates a new vertex in the middle of an edge, splitting the edge into two edges.

Unlike SplitEdge, this routine requires a triangle face on each side. Since it has this, it also creates new edges connecting the new vertex with the point opposite the split edge on each face. This in turn splits the faces. So two triangles sharing this single edge become four triangles with four shared edges meeting at a single new vertex.

This method requires that MN_MESH_FILLED_IN be set (otherwise it will cause an assertion failure), and maintains the combinatorics completely.

Parameters:

int ee

The edge to split. Note that if the faces on either side do not have deg=3 and hdeg=0, an assertion failure will result.

float prop

The proportion along the edge for the new vertex to be located. This ranges from 0, at v1, to 1, at v2. A value of .3, for instance, would create a new vertex at .7*P(v1) + .3*P(v2).

float thresh

If prop is less than thresh or more than 1-thresh, the method will not split the edge, and will return v1 or v2 respectively. This is so that calling routines can safely pass values anywhere from 0 to 1, without worrying about creating tiny "shard" faces.

bool neVis

This tells whether the new edges that split the faces should be visible. (The new edge formed from part of the old edge takes such characteristics from the old edge.)

bool neSel

This tells whether the new edges that split the faces should be selected. (The new edge formed from part of the old edge takes such characteristics from the old edge.)

Returns

The index of the new vertex created, or the index of the old vertex you can use instead if you're within thresh of the endpoints.

DllExport int SplitTriFace	(	int	ff,
		double *	bary = NULL,
		float	thresh = MNEPS,
		bool	neVis = TRUE,
		bool	neSel = FALSE
	)

Adds a vertex somewhere in a triangle face, and also adds edges from that vertex to each of the corners, splitting the face into 3 smaller triangle faces.

The triangle face used here can have hidden vertices, as long as it is of degree 3. However, if the threshold parameter comes into play and this routine calls SplitTriEdge, both this face and the one across the relevant edge will need to have both degree 3. (Otherwise there's an assertion failure.)

This method requires that MN_MESH_FILLED_IN be set (otherwise it will cause an assertion failure), and maintains the combinatorics completely.

Parameters:

int ff

The face to split.

double *bary

The barycentric coordinates of the new point you wish to add. If this is NULL, the default values of (1/3, 1/3, 1/3) (the middle of the triangle) are used. These values MUST all fall between 0 and 1, and they MUST add up to 1 (give or take a floating point error) to get a sensible result.

float thresh

If one of the barycentric coordinates is greater than 1-thresh, that vertex dominates completely. No splitting is done, and that vertex is returned. If not, but if one of the barycentric coordinates is less than thresh, the new point must fall on the opposite edge. SplitTriEdge is therefore called on that edge, and passes along the value this returns.

bool neVis

Whether or not the new edges connecting the new vertex to the corners should be visible.

bool neSel

Whether or not the new edges connecting the new vertex to the corners should be selected.

Returns

The index of the new vertex created, or the index of the old vertex you can use instead if you're within thresh of one of the corners.

DllExport void SplitTri6	(	int	ff,
		double *	bary = NULL,
		int *	nv = NULL
	)

This is another way to subdivide a face on a triangular mesh into sub-triangles.

In this case, 4 new vertices are produced, and this face becomes 6 new faces. MN_MESH_FILLED_IN is required and preserved, and MN_MESH_NONTRI cannot be true when this method is called.

The subdivision technique is as follows: a new point is added at the barycentric coordinates given on the face given. New points are also added in each edge of the original face, such that a line from each of these three new edge points to the opposite original vertex passes through the new center point. These three edge points have edges drawn between them, and have edges to the new center point, dividing the face into 3 large outer triangles and 3 smaller inner triangles. Neighboring faces are split into 2 triangles, since the common edge is divided. This is a useful subdivision technique when you know you're going to want to add a lot of detail to a specific region of a face.

Parameters:

int ff

The face to split.

double *bary=NULL

The barycentric coordinates for the center point. If bary is NULL, the default barycentric coordinates of (1/3, 1/3, 1/3) are used.

int *nv=NULL

This is a pointer to an array of at least 4 int's in which the 4 new vertex indices should be stored. (This is mainly if the calling routine needs to know what these new vertices are.) If this is NULL, it is ignored.

DllExport int SplitEdge	(	int	ee,
		float	prop = .5f
	)

Creates a new vertex somewhere in the middle of an edge, splitting the edge into two edges.

Incident faces are updated in their vertex, edge, mapping coordinate, and vertex color lists, as well as in their triangulation. This method requires that MN_MESH_FILLED_IN be set (otherwise it will cause an assertion failure), and maintains the combinatorics completely.

Parameters:

int ee

The edge to split.

float prop=.5f

The proportion along the edge where the new vertex should go. This proportion should be between 0 and 1. The new vertex location is P(E(ee)->v1)*(1.0f-prop) + P(E(ee)->v2)*prop.

Returns

The index of the new vertex.

DllExport int SplitEdge	(	int	ee,
		float	prop,
		Tab< int > *	newTVerts
	)

This new SplitEdge variant allows you to recover information about the new map vertices created at the point where the edge is split.

Everything else is the same as the existing SplitEdge (int ee, float prop=.5f) method.

Parameters:

Tab<int> *newTVerts

Pointer to a table in which the new map vertices can be stored. This table is set to size (NUM_HIDDENMAPS + numm)*2. The two entries for each map channel are used to store the two new map vertices at this edge split: newTVerts[(NUM_HIDDENMAPS+mp)*2+0] is the map vertex for map channel mp on the "f1" side of the edge, and newTVerts[(NUM_HIDDENMAPS+mp)*2+1] is the map vertex for the "f2" side if f2>=0 (or otherwise left uninitialized). (These values are often, but not always, the same. They are different if the map has a seam along this edge.)

DllExport int SplitEdge	(	int	ff,
		int	edgeIndex,
		float	prop,
		bool	right,
		int *	nf = NULL,
		int *	ne = NULL,
		bool	neVis = FALSE,
		bool	neSel = FALSE,
		bool	allconvex = FALSE
	)

Splits an edge that is specified from the face level, and splits off triangles from the adjacent faces.

This method is often preferable in convex meshes, when it's important that no nonconvex faces are introduced. The other SplitEdge methods leave faces with three vertices in a line, which is not strongly convex. This version makes a triangle out of half of the split edge, the next face edge, and a diagonal.

Note: This method absolutely requires that the faces on either side of the edge being split are Convex. Use MakeFaceConvex if needed.

Parameters:

int ff

One of the faces which uses the edge you wish to split.

int edgeIndex

The index of the edge in face ff.

float prop

The proportion along the edge where the new vertex should go. This proportion should be between 0 and 1. The new vertex location is P(E(ee)->v1)*(1.0f-prop) + P(E(ee)->v2)*prop.

bool right

If FALSE, the new triangle is formed from the lower or "left" half of the split edge. If TRUE, it's formed from the higher or "right" half. (These orientations make sense if you imagine viewing the face from above with the split edge on the bottom, as pictured.) If you want the triangle to be formed from the smaller half, use (prop<=.5f) for this argument.

int *nf=NULL

If non-NULL, this should point to an array of at least 2 elements where the new face indices should be put. Nf[0] is set to the new face created from face ff, while nf[1] is set to the new face created from the face on the other side of the edge, if any.

int *ne=NULL

If non-NULL, this should point to an array of at least 3 elements where the new edge indices should be put. Ne[0] is set to the new edge created from the second half of the edge we're splitting. Ne[1] represents the diagonal edge on face ff, while ne[2] represents the diagonal edge on the face on the other side of the split edge (if any).

bool neVis=FALSE

Indicates whether the new edges ne[1] and ne[2] should be visible.

bool neSel=FALSE

Indicates whether the new edges ne[1] and ne[2] should be selected.

bool allconvex=FALSE

Indicates whether the original faces on both sides of the edge are guaranteed to be convex. If so, these faces are retriangulated with BestConvexTriangulation; otherwise, RetriangulateFace is used.

Returns

The index of the new vertex.

DllExport int IndentFace	(	int	ff,
		int	ei,
		int	nv,
		int *	ne = NULL,
		bool	nevis = TRUE,
		bool	nesel = FALSE
	)

Uses a new vertex to "indent" one of the sides of the face.

The indentation triangle is split off as a new face, which is returned.

Parameters:

int ff

The face to be "indented".

int ei

The index of the edge which will be replaced by the indentation.

int nv

The index of the new vertex. This vertex should lie within the face, in the face's plane, and should not be connected to any faces or edges.

int *ne=NULL

If non-NULL, this should point to an array of at least 2 elements where the new edges should be stored.

bool nevis=TRUE

Indicates whether the new edges should be visible.

bool nesel=FALSE

Indicates whether the new edges should be selected.

Returns

The index of the new face representing the indentation triangle.

DllExport void SeparateFace	(	int	ff,
		int	a,
		int	b,
		int &	nf,
		int &	ne,
		bool	neVis = FALSE,
		bool	neSel = FALSE,
		bool	track = false
	)

This routine takes a larger face and divides it into two smaller faces, creating a new edge in the process.

It is crucial that the face given to SeparateFace has a valid triangulation.

Parameters

ff	- The face to divide.
a	- The first index (in the face's vtx list) of the vertices used to divide the face. Note that a and b should be at least two units apart in each direction: a can't be (b+1) mod deg, and b can't be (a+1) mod deg. Also, the straight line connecting MNVerts V(vtx[a]) and V(vtx[b]) should not cross any of the edges of the face, otherwise the results will not be valid.
b	- The second index (in the face's vtx list) of the vertices used to divide the face. Note that a and b should be at least two units apart in each direction: a can't be (b+1) mod deg, and b can't be (a+1) mod deg. Also, the straight line connecting MNVerts V(vtx[a]) and V(vtx[b]) should not cross any of the edges of the face, otherwise the results will not be valid.
nf	- A variable to hold the new face created by this division. (Half the face remains as face ff, the other half is the new face nf.)
ne	- A variable to hold the new edge created by this division.
neVis	- Indicates whether the new edge should be visible. (The other version of SeparateFace always leaves the edge invisible.)
neSel	- Indicates whether the new edge should be selected. (The other version of SeparateFace always leaves the edge unselected.)
track	- When true, the two faces resulting from this operation will have the same 'track' value as the original so that they can later be associated, if desired.

DllExport bool Slice	(	Point3 &	N,
		float	off,
		float	thresh,
		bool	split,
		bool	remove,
		bool	flaggedFacesOnly = false,
		DWORD	faceFlags = MN_SEL
	)

Slices the MNMesh along a specified plane, splitting edges and faces as needed to divide faces into those above and those below the plane.

Equivalent to the Slice modifier.

Parameters:

Point3 & N

The normal to the slice plane. This should be a unit vector.

float off

The offset of the slice plane. For any point X in the plane, DotProd(N,X) = off.

float thresh

If a vertex lies within thresh of the splitting plane, ie if absf(DotProd (N,X)

• offset) < thresh for a point X, it's considered to be on the plane. This prevents some points being created extremely close to each other. Zero is an acceptable value; the constant MNEPS is what's used in the Slice Modifier.
  
  bool split
  
  Indicates whether the points and edges along the slice should be replicated, dividing the mesh into separate "above" and "below" connected components. Equivalent to the Slice modifier's "Split Mesh".
  
  bool remove
  
  Indicates whether the portion of the mesh above the split plane should be removed. Equivalent to the Slice modifier's "Remove Top". (To "Remove Bottom", just multiply N and off by -1.)

DllExport bool SplitFlaggedVertices

(

DWORD

flag = MN_SEL

)

Splits the flagged vertices into a clone for each face using the vertex.

For example, if used on the front top left corner of a standard 3ds Max box, it splits the vertex into 3, one for the front face, one for the top face, and one for the left face.

Parameters:

DWORD flag=MN_SEL

The flag that indicates which vertices to split.

Returns

TRUE if anything happened, FALSE if none of the vertices were split. (Note that this method will return FALSE if no vertices are flagged, but also if there are flagged vertices but they're all on 1 or 0 faces already.)

DllExport bool SplitFlaggedEdges

(

DWORD

flag = MN_SEL

)

"Splits" edges by breaking vertices on two or more flagged edges into as many copies as needed.

In this way, any path of flagged edges becomes an two open seams.

Parameters:

DWORD flag=MN_SEL

Indicates which edges should be split. (Left at the default, selected edges are split.)

Returns

True if any topological changes happened, false if nothing happened.

DllExport bool SplitFacesUsingBothSidesOfEdge

(

DWORD

edgeFlag = 0x0

)

DllExport void MultiDivideEdge	(	int	edge,
		int	segments
	)

Splits an edge into multiple edges.

Parameters

edge	An argument of type int.
segments	The number of new segments to create out of the original edge.

DllExport void MakeConvex

(

)

Calls MakeFaceConvex() on all (non-dead) faces, producing a mesh with 100% convex faces.

DllExport void MakeFaceConvex

(

int

ff

)

Makes face ff convex, essentially by chopping off corners.

The corners themselves become new faces. This routine is actually recursive: if this face is already convex, it returns without affecting it. If not, it finds a suitable line (between outside vertices) to divide the face along, and then calls MakeFaceConvex() again on both of the smaller faces. It is crucial that the face given to MakeFaceConvex has a valid triangulation.

DllExport void RestrictPolySize

(

int

maxdeg

)

Subdivides polygons as needed so that no polygon has degree larger than maxdeg.

(For instance, if maxdeg was 4, an octagon would have edges added until it was composed of 3 quads, or some combination of quads and tris.)

Parameters:

int maxdeg

Maximum degrees.

DllExport void MakePlanar	(	float	planarThresh,
		bool	track = false
	)

Makes all faces planar, within the angle threshold given, by subdividing them as necessary.

(See MakeFacePlanar.)

Parameters

planarThresh	- The planar angle threshold.
track	- Indicates whether to track faces that are split by this method. When true, the faces of all pieces of any nonplanar faces split by this method will have the same 'track' value as the original so that they can later be associated, if desired.

DllExport void MakeFacePlanar	(	int	ff,
		float	planarThresh,
		bool	track = false
	)

Makes the specified face planar by subdividing if necessary.

planarThresh represents an angle in radians. If the angle across any of the face's diagonals is larger than this amount, the face is divided on that diagonal.

Parameters

ff	- The face of the index to make planar
planarThresh	- The planar angle threshold.
track	- Indicates whether to track faces that are split by this method. When true, the faces of all pieces of any nonplanar faces split by this method will have the same 'track' value as the original so that they can later be associated, if desired.

DllExport bool WeldVerts	(	int	a,
		int	b
	)

Welds vertices a and b, correcting the mesh topology to match.

All references to b are moved to a, and b is killed. If there is a topological problem preventing the weld from occurring, the method does nothing and returns FALSE. If there is no such problem, the weld goes ahead and returns TRUE. Note that if a and b are joined by an edge, this method just calls WeldEdge on that edge.

DllExport bool WeldEdge

(

int

ee

)

Welds the endpoints of edge ee, correcting the mesh topology to match.

All references to E(ee)->v2 are moved to E(ee)->v1, and both ee and E(ee)->v2 are killed. If there is a topological problem preventing the weld from occurring, the method does nothing and returns FALSE. If there is no such problem, the weld goes ahead and returns TRUE.

DllExport bool WeldBorderVerts	(	int	v1,
		int	v2,
		Point3 *	destination
	)

Welds vertices v1 and v2 together.

Both vertices must be on borders, and they cannot share an edge. If destination isn't NULL, it indicates where the welded vertex should be located. (If it is NULL, the welded vertex is placed at the midpoint of the inputs.)

Parameters:

int v1, v2

The vertex indices to wel.

Point3 *destination

The destination of the welded vertex.

Returns

TRUE if something was welded, FALSE otherwise.

DllExport bool WeldBorderEdges	(	int	e1,
		int	e2
	)

Welds the specified border edges together.

Parameters:

int e1, int e2

The edges to be welded. They must be border edges, in the sense that each of them must be open (used by only one face). The result is located where edge e2 was. e[e1].v1 is joined to e[e2].v2, and e[e1].v2 is joined to e[e2].v1.

Returns

True if anything was welded, false if the operation could not proceed. This method welds edges e1 and e2 together. Both edges must be on borders.

Parameters:

int e1, e2

The two edges you want to weld.

Returns

TRUE if something was welded, FALSE otherwise.

DllExport bool WeldBorderVerts	(	float	thresh,
		DWORD	flag = MN_SEL
	)

Welds the specified border vertices together.

Parameters:

float thresh

The welding threshold. Vertices further apart than this distance (in object space) will not be welded.

DWORD flag=MN_SEL

Indicates which vertices should be welded. (Non-border vertices, those in the "interior" of the surface, are ignored even if flagged.)

Returns

True if anything was welded, false otherwise. This method welds all flagged border vertices within "thresh" of each other. Vertices are only welded pairwise. If vert A's closest target is vert B, but vert B is closer to vert C, verts B and C are welded and A is left out in the cold.

Parameters:

float thresh

The threshold.

DWORD flag=MN_SEL

This indicates the vertices we look at. If left at the default, selected vertices' colors are analyzed. If flag were to equal MN_WHATEVER, then vertices with the MN_WHATEVER flag would have their colors analyzed.

Returns

TRUE if something was welded, FALSE otherwise.

DllExport bool WeldOpposingEdges

(

DWORD

edgeFlag

)

Welds pairs of one-sided edges between the same two vertices.

DllExport void TessellateByEdges	(	float	bulge,
		MeshOpProgress *	mop = NULL
	)

This is a tessellation routine similar to AndersonDo().

It produces the same topology, but bulges new vertices outward to maintain even curvature instead of bringing the original vertices inward. For a demonstration of the effect this algorithm has on meshes, apply 3ds Max's Tessellate modifier with the "Edge" and "Operate On: Polygons" options selected. Note that this algorithm roughly quadruples the size of the MNMesh.

Parameters:

float bulge

The factor to "push out" new vertices by in the direction of the surface curvature. Values of about .25 are reasonable. This value is equivalent to one hundredth of the value specified as "Tension" in the Tessellate modifier.

MeshOpProgress *mop=NULL

A pointer to a MeshOpProgress. See Class MeshOpProgress for details.

DllExport bool AndersonDo	(	float	interp,
		int	iSelLevel,
		MeshOpProgress *	mop = NULL,
		DWORD	subdivFlags = 0
	)

It breaks every MNFace into deg new faces with four sides.

The four vertices of each of these new quads come from the center point of the original face, one corner of the original face, and the middles of the two edges on either side of that corner. For a demonstration of the effect this algorithm has on meshes, apply 3ds Max's MeshSmooth modifier with the "Quad Output" box checked. Note that this algorithm roughly quadruples the size of the MNMesh.

Parameters:

float interp

This is the proportion of relaxation applied to the original vertices to produce a smoothed result. Vertices in the result correspond to three sources: all the original vertices are still included, new vertices are produced at the center of each face, and new vertices are produced in the middle of each edge. Face-vertices are always at the exact center of the original faces, but edge-vertices and vertex-vertices are relaxed into the mesh to improve smoothness.

int iSelLevel

The selection level that the Mesh we're modifying was set to. If this selection level is MNM_SL_FACE, we'd want to keep non-selected faces as unmodified as possible, whereas if the selection level is MNM_SL_OBJECT or MNM_SL_VERTEX, we could break off chunks of some unselected faces that touch modified vertices. Again, observe the result of MeshSmooth, with Quad Output, on various selection sets of a mesh for examples of this behavior.

MeshOpProgress *mop=NULL

This optional parameter points to an instance of the virtual class MeshOpProgress, which is used to allow the user to abort out of lengthy calculations. (SabinDoo is a lengthy calculation.) See class MeshOpProgress.

DWORD subdivFlags=0

This parameter is available in release 4.0 and later only.

There is currently only one flag for the extra argument, MNM_SUBDIV_NEWMAP. If this flag is set, the new mapping scheme will be used.

DllExport void TessellateByCenters

(

MeshOpProgress *

mop = NULL

)

Note that this algorithm roughly triples the size of the MNMesh.

For an example of how it works, apply 3ds Max's Tessellate modifier with the "Face" and "Operate On: Polygons" options selected. This algorithm splits each face into deg triangles, where each triangle contains the center of the face and one edge from the perimeter.

DllExport void SabinDoo	(	float	interp,
		int	iSelLevel,
		MeshOpProgress *	mop = NULL,
		Tab< Point3 > *	offsets = NULL
	)

Note that this algorithm roughly triples the size of the MNMesh.

For an example of how it works, apply 3ds Max's MeshSmooth modifier with "classic" MeshSmooth Type.

This technique for tessellation is based on a paper, "A Subdivision Algorithm for Smoothing Down Irregularly Shaped Polygons", published by D. W. H. Doo of Brunel University, Middlesex, England, in IEEE in 1978. It essentially creates a new face for every vertex, face, and edge of the original mesh. The new vertices this technique requires are made by creating one vertex for each corner of each original face. These vertices are located on a line from the original face corner to its center. All the faces around a given (targeted) vertex will create such a point; these points form the corners of the face created from this vertex. The original faces become smaller, as they use the new points instead of their old corners. And the four new points created on the faces on either side of an edge, for the endpoints of that edge, become the four corners of the new face representing the edge. Apply a MeshSmooth with default values to a 3ds Max box to see how this plays out.

Parameters:

float interp

The position along the line from a vertex to the center of each face to create the new vertex at. If this value is near 0, the original faces will shrink very little, and the new faces at the vertices and edges will be very small. If this value is near 1, the original faces will shrink to almost nothing, and the new vertex faces will be dominant. Again, adjust the Strength parameter in MeshSmooth to gain an understanding of this parameter.

int iSelLevel

This parameter is included so that special handling can be applied to selected faces, if we're at the MNM_SL_FACE selection level. Generally, this algorithm works on all targeted vertices, affecting all faces that contain at least one targeted vertex. However, if the vertices are targeted by whether or not they're on selected faces, we'll wind up "spilling" the algorithm over into the non-selected faces. Generally in such routines as MeshSmooth, the user would want non-selected faces not to be affected at all. If this is the case, setting this value to MNM_SL_FACE will prevent faces without the MN_SEL flag from being affected.

MeshOpProgress *mop=NULL

This optional parameter points to an instance of the virtual class MeshOpProgress, which is used to allow the user to abort out of lengthy calculations. (SabinDoo is a lengthy calculation.) See Class MeshOpProgress.

Tab<Point3> *offsets=NULL

The SabinDoo algorithm is typically used to go from one polygonal approximation of a smooth surface to another polygonal approximation of 4 times the size, but it never actually returns the vertices as they would appear on the "limit surface". If this parameter is non-NULL, it's filled in with offsets that will, when added to the vertices in the SabinDoo result, take those vertices onto the limit surface. This makes a smoother result that matches better between different iterations.

DllExport void SabinDooVert	(	int	vid,
		float	interp,
		int	iSelLevel,
		Point3 *	ctr,
		Tab< Point3 > *	offsets = NULL
	)

This applies the Sabin-Doo tessellation technique to a single vertex.

The vertex is split into as many new vertices as there are faces using this vertex. The incident faces are shrunk back to make use of these new vertices, and a new face is created from them representing the vertex. Incident edges are split into triangles using their other end and the appropriate edge from the new vertex-face. To see the result of this algorithm, apply MeshSmooth (with default parameters) to an EditableMesh with a single vertex selected.

Parameters:

int vid

The vertex to SabinDoo.

float interp

The proportion from this vertex to the center of each of the incident faces to put the new vertex for that face.

int iSelLevel

If this is equal to MNM_SL_FACE, faces without the MN_SEL flag will not be affected.

Point3 *ctr

This is a list of centers of all the faces, which cannot be NULL. Since this algorithm changes the original faces, merely computing face centers on the fly won't work. (When SabinDooing two vertices on a given face, the second vertex will get bad center information.) Thus the user should compute all the face centers in advance using ComputeCenters or (preferably) ComputeSafeCenters.

MeshOpProgress *mop=NULL

This optional parameter points to an instance of the virtual class MeshOpProgress, which is used to allow the user to abort out of lengthy calculations. (SabinDoo is a lengthy calculation.) See Class MeshOpProgress.

Tab<Point3> *offsets=NULL

The SabinDoo algorithm is typically used to go from one polygonal approximation of a smooth surface to another polygonal approximation of 4 times the size, but it never actually returns the vertices as they would appear on the "limit surface". If this parameter is non-NULL, it's filled in with offsets that will, when added to the vertices in the SabinDoo result, take those vertices onto the limit surface. This makes a smoother result that matches better between different iterations.

(In SabinDooVert, the offsets for the vertices created by this method are filled in. The offsets table is resized if necessary to accommodate this.)

DllExport void CubicNURMS	(	MeshOpProgress *	mop = NULL,
		Tab< Point3 > *	offsets = NULL,
		DWORD	subdivFlags = 0
	)

Non-uniform rational mesh smooth.

This is a tessellation routine. Note that this algorithm roughly quadruples the size of the MNMesh. For an example of how it works, apply 3ds Max's MeshSmooth modifier with "NURMS" MeshSmooth Type.

This technique for tessellation is based loosely on a 1998 SIGGraph paper, "Non-Uniform Recursive Subdivision Surfaces", by Sederberg, Zheng, Sewell, and Sabin, with additional work by Autodesk staff. Topologically, it's quite simple, as it creates a vertex in the center of every edge and face and connects these vertices with quads. However, the geometry is a non-uniform rational extension of the old Catmull-Clark standard cubic subdivision.

To set the vertex and edge weights used by the algorithm, use the EdgeKnots and VertexWeights methods of MNMesh. Like other subdivision routines, this routine only subdivides areas of the MNMesh indicated by the MN_TARG flag on vertices, and uses the MNEdge::Uncrossable method to determine where the regional boundaries should be.

Parameters:

MeshOpProgress *mop=NULL

See Class MeshOpProgress - provides a way to abort the calculation.

Tab<Point3> *offsets=NULL

Unused for now.

DWORD subdivFlags=0

This parameter is available in release 4.0 and later only.

There is currently only one flag for the extra argument, MNM_SUBDIV_NEWMAP. If this flag is set, the new mapping scheme will be used.

DllExport void PrepForBoolean

(

)

Prepares a MNMesh for a Boolean operation.

This is required for successful Booleans. Generally, it makes the mesh into a convex poly mesh, removing any hidden vertices, finds open regions, and collapses dead structures.

DllExport bool BooleanCut	(	MNMesh &	m2,
		int	cutType,
		int	fstart = 0,
		MeshOpProgress *	mop = NULL
	)

BooleanCut uses the same techniques as MakeBoolean to cut the faces of this with the faces of m2.

As with Boolean, both this and m2 should be prepared with the PrepForBoolean method.

Parameters:

MNMesh & m2

The MNMesh to use to cut this one.

int cutType

One of the following:

BOOLOP_CUT_REFINE

Slice the faces of this with the surface of m2, but do not separate the mesh along the seam.

BOOLOP_CUT_SEPARATE

Slice and separate the faces of this along the surface of m2.

BOOLOP_CUT_REMOVE_IN

Slice the faces of this with the surface of m2, then remove all the faces of this that are inside m2.

BOOLOP_CUT_REMOVE_OUT

Slice the faces of this with the surface of m2, then remove all the faces of this that are inside m2.

int fstart=0

Indicates the face (of this) we should start checking for cuts by m2. This can be useful if, for example, you know that the first 100 faces of this are nowhere near m2.

MeshOpProgress *mop=NULL

See Class MeshOpProgress. Provides a way to abort the calculation.

Returns

TRUE if finished successfully; FALSE if aborted by the MeshOpProgress.

DllExport bool MakeBoolean	(	MNMesh &	m1,
		MNMesh &	m2,
		int	type,
		MeshOpProgress *	mop = NULL
	)

Makes this MNMesh into a Boolean result of the given MNMeshes.

The operands are not modified during this process. The Boolean algorithm is identical to the one used in the Boolean 2 compound object. Notice that there are no transform arguments, as there are in the previously used CalcBoolOp - transforms should be applied to the operands beforehand using the MNMesh::Transform method.

Parameters:

MNMesh & m1

The first operand mesh, which should have had PrepForBoolean called.

MNMesh & m2

The second operand mesh, which should have had PrepForBoolean called.

int type

The type of Boolean. The Boolean types are defined in mesh.h, and are one of MESHBOOL_UNION, MESHBOOL_INTERSECTION, or MESHBOOL_DIFFERENCE. If MESHBOOL_DIFFERENCE is selected, operand m2 is subtracted from operand m1. (To get the opposite result, just switch the order of m1 and m2.)

MeshOpProgress *mop=NULL

A pointer to a MeshOpProgress. See Class MeshOpProgress for details. The mop is initialized with the number of faces in mesh 1 plus the number of faces in mesh 2 plus 10. MakeBoolean aborts acceptably if mop->Progress returns FALSE, in which case the partially Booleaned MNMesh is returned. (Usually this consists of mesh 1 partially cut by mesh 2, or mesh 1 fully cut and mesh 2 partially cut, with no faces removed.) This argument may safely be left at NULL if you do not wish to be updated on the Boolean progress or have the capability to abort.

Returns

Returns FALSE if the operation was cancelled by the MeshOpProgress or if it was unable to match the seams of the two operands at the end, resulting in a mesh with holes. It returns TRUE if everything went well, producing a solid, hole-free mesh.

Note that it will always return FALSE if one of the operands has holes.

Sample Code:

Sample code: the following code can be used to replace the old CalcBoolOp method.

BOOL CalcNewBooleanOp(Mesh & mesh, Mesh & mesh1, Mesh & mesh2, int op, MeshOpProgress *prog=NULL, Matrix3 *tm1=NULL, Matrix3 *tm2=NULL, int whichinv=0)
{
    MNMesh m1(mesh1);
    MNMesh m2(mesh2);
    if(tm1) m1.Transform(*tm1);
    if(tm2) m2.Transform(*tm2);
    m1.PrepForBoolean();
    m2.PrepForBoolean();
    MNMesh mOut;
    mOut.MakeBoolean(m1, m2, op, prog);
    if(whichinv==0) mOut.Transform(Inverse(*tm1));
    if(whichinv==1) mOut.Transform(Inverse(*tm2));
    mOut.OutToTri(mesh);
    return TRUE;
}

DllExport void Connect	(	MNMeshBorder &	borderList,
		int	segs,
		float	tension,
		bool	sm_bridge,
		bool	sm_ends,
		Tab< int > *	vsep = NULL
	)

Connect automatically figures out which loops in the given MNMeshBorder would make good candidates for connecting, and calls ConnectLoop on them all to connect them.

Good candidates are pairs of loops that face each other. Centers and normals of each of the "holes" are compared to find the best matches.

Parameters:

MNMeshBorder & borderList

The boundary information for the MNMesh mesh.

int segs

The number of segments in each bridge.

float tension

The tension of each bridge - this controls how much the surface tangents at each end of the bridge affect the bridge's shape.

bool sm_bridge

If TRUE, each bridge should be smoothed with some unused smoothing group.

bool sm_ends

If TRUE, additional smoothing groups are applied to the end faces of each bridge to ensure that the bridge smooths with the existing faces around each border loop.

Tab<int> *vsep=NULL

If not NULL, this points to a "separation list" of vertices. Frequently the user wishes to connect two distinct object (as with the Connect compound object). In these cases, the vertices of the different connected components are often grouped in distinct sets: vertices 0 through 26 come from the first component, 27 through 118 from the second, etc. Generally the user would not want a component to connect to itself, but rather only to other components. So if non-NULL, this is assumed to point to a list describing the vertex ranges for each component - (0, 27, 119, etc). The list should have size (number of components+1), and the last element should be MNMesh::numv. Given such an input, the Connect algorithm will only connect loops to loops in other components.

DllExport void ConnectLoops	(	Tab< int > &	loop1,
		Tab< int > &	loop2,
		int	segs,
		float	tension,
		DWORD	smGroup,
		MtlID	mat,
		bool	sm_ends
	)

Connects two border loops by filling in new geometry between them, as is done in the Connect compound object.

Parameters:

Tab<int> & loop1

Tab<int> & loop2

These parameters, which are interchangeable, are lists of edges that represent border loops in the MNMesh. It is assumed that the MNMesh is filled in, that each of the edges in the loops is in fact one-sided (e[loop1[i]].f2 == -1), and that the edges go in counterclockwise order when looking from outside the mesh (so e[loop1[i]].v1 == e[loop1[i+1]].v2). (These are the sort of border loops you find in an MNMeshBorder class.)

int segs

The number of segments in the bridge.

float tension

The tension of the bridge - this controls how much the surface tangents at each end of the bridge affect the bridge's shape.

DWORD smGroup

These smoothing group(s) should be applied to the entire bridge. (Use 0 for a faceted bridge.)

MtlID mat

This is the material used for the bridge faces.

bool sm_ends

If TRUE, additional smoothing groups are applied to the end faces of the bridge to ensure that the bridge smooths with the existing faces around each border loop.

DllExport bool ConnectEdges	(	DWORD	edgeFlag,
		int	segments = 2
	)

Connect the marked edges of a polygon if they are opposing.

Returns true is successful. This is the same as calling IMeshUtilities8::ConnectEdges()

Parameters

edgeFlag	Identifies the kinds of edges to connect. For example for selected edges set use MN_SEL.
segments	Segments is the number of times to segments to split the original edge into.

Returns

Returns true if the operation was successful or false otherwise.

DllExport bool ConnectVertices

(

DWORD

vertexFlag

)

Connects tagged vertices across a polygon.

Parameters

vertexFlag

Indicates the type of vertices to connect. Set to MN_SEL to operate on selected edges.

Returns

Returns a value of type bool.

DllExport void FacePointBary	(	int	ff,
		Point3 &	p,
		Tab< float > &	bary
	)

Finds "Generalized Barycentric Coordinates" for the point given.

Generalized barycentric coordinates are not uniquely determined for polygons of degree greater than 3, but this algorithm should find a reasonable balance, where for instance a point in the center of a polygon would have a significant contribution from all vertices.

Generalized barycentric coordinates are a set of floats, one per vertex in the polygon, such that the sum of all the floats is 1, and the sum of all the floats times the corresponding vertices comes out to the point given.

Parameters:

int ff

The face we're finding barycentric coordinates on.

Point3 & p

The point we're trying to find barycentric coordinates for. If this point is not in the plane of the polygon, the coordinates produced should represent its projection into the polygon's plane. Points outside the boundary of the polygon should be acceptable; some of the barycentric coordinates will be negative in this case.

Tab<float> & bary

The table to put the results in. This table is set to size f[ff].deg.

DllExport void FindFaceBaryVector	(	int	face,
		int	vertIndex,
		Point3 &	vector,
		Tab< float > &	tBary
	)

DllExport void CloneVerts	(	DWORD	cloneFlag = MN_SEL,
		bool	clear_orig = TRUE
	)

Clones flagged vertices, creating new vertices that aren't used by any faces.

Parameters:

DWORD cloneFlag = MN_SEL

Indicates which vertices should be cloned.

bool clear_orig = TRUE

If true, the original vertices should have the cloneFlag cleared. (The clones will always have this flag set.)

DllExport void CloneFaces	(	DWORD	cloneFlag = MN_SEL,
		bool	clear_orig = TRUE
	)

Clones the flagged faces, as well as all the vertices and edges that are used by the faces.

Parameters:

DWORD cloneFlag = MN_SEL

Indicates which faces should be cloned.

bool clear_orig = TRUE

If true, the original faces should have the cloneFlag cleared. (The clones will always have this flag set.)

DllExport void CopyBasics	(	const MNMesh &	from,
		bool	copyEdges = false
	)

Copies bare geometry only - no per-vertex data, maps, or normals.

Useful for keeping low-memory local caches of a mesh where map, vertex data, edge data, normals, and other interfaces are not required.

Parameters:

const MNMesh & from

The mesh to copy into this mesh.

bool copyEdges = false

Indicates if the winged-edge array, as well as vertex and face

references to edges, should be copied. If false, the

MN_MESH_FILLED_IN flag is cleared in this mesh.

DllExport bool MakeFlaggedPlanar	(	int	selLev,
		DWORD	flag = MN_SEL,
		Point3 *	delta = NULL
	)

Moves the flagged components into their "average plane".

(Plane computed using average component positions and normals.)

Parameters:

int selLev

Selection level, one of MNM_SL_VERTEX, MNM_SL_EDGE, MNM_SL_FACE, or MNM_SL_OBJECT.

DWORD flag=MN_SEL

The flag that indicates which components to align. Ignored if msl is set to MNM_SL_OBJECT.

Point3 *delta=NULL

If non-NULL, this is presumed to point to an array of size equal to MNMesh::numv, and instead of actually moving the vertices, the algorithm stores offsets in this array such that v[i].p + delta[i] is in the plane.

Returns

Indicates whether anything was moved. (Or if delta is non-NULL, if any deltas are nonzero.)

DllExport bool MoveVertsToPlane	(	Point3 &	norm,
		float	offset,
		DWORD	flag = MN_SEL,
		Point3 *	delta = NULL
	)

Projects the flagged vertices into the specified plane, or produces an array of offsets which would do so.

Parameters:

Point3 & norm, float offset

The definition of the plane: DotProd (norm, x) - offset = 0.

DWORD flag=MN_SEL

The flag that indicates which vertices to move.

Point3 *delta=NULL

If non-NULL, this is presumed to point to an array of size equal to MNMesh::numv, and instead of actually moving the vertices, the algorithm stores offsets in this array such that v[i].p + delta[i] is in the plane.

Returns

Indicates whether anything was moved. (Or if delta is non-NULL, if any deltas are nonzero.)

DllExport bool DetachFaces

(

DWORD

flag = MN_SEL

)

Detaches specified faces to a separate element, cloning vertices and edges as necessary on the boundary between flagged and unflagged faces.

Parameters:

DWORD flag=MN_SEL

Indicates which edges should be split. (Left at the default, selected edges are split.)

Returns

True if any faces were detached, false if nothing happened. (Note that the algorithm will return false if, for instance, all flagged faces form elements which are already distinct from those formed from non-flagged faces.)

DllExport bool DetachElementToObject	(	MNMesh &	nmesh,
		DWORD	fflags = MN_SEL,
		bool	delDetached = true
	)

Detaches specified faces (and related vertices and edges) to a new MNMesh.

As indicated by the name, the specified region should be a single element; crashes will occur if faces that are flagged share vertices or edges with nonflagged faces.

Parameters:

MNMesh & nmesh

The new mesh. This is assumed to be empty. The flagged elements are put here, and reindexed so there are no unused components. (This occurs for all map channels as well - only the necessary map vertices are copied over.)

DWORD fflags

The flags that indicate the faces which compose the element we want to detach.

bool delDetached=true

Indicates whether the specified element should be deleted from this MNMesh.

Returns

true if anything was detached, false otherwise.

DllExport bool ExtrudeFaceClusters

(

MNFaceClusters &

fclust

)

Performs the topological component of an extrusion on all face clusters.

Each cluster is "extruded", which means that vertices and edges on the boundary of the cluster are cloned and new faces and edges are created to connect the clones to the originals. (Note that nothing is moved in this process - movement is handled separately. See GetExtrudeDirection for details.)

Parameters:

MNFaceClusters & fclust

A list of face clusters. See the constructors in class MNFaceClusters and the face cluster related methods of class MNTempData for information on how to set up these clusters based on edge angles and face flags.

Returns

True if any faces were extruded, false if nothing happened.

DllExport bool ExtrudeFaceCluster	(	MNFaceClusters &	fclust,
		int	cl
	)

Performs the topological component of an extrusion on the specified face cluster.

This means that vertices and edges on the boundary of the cluster are cloned and new faces and edges are created to connect the clones to the originals. (Note that nothing is moved in this process - movement is handled separately. See GetExtrudeDirection for details.)

Parameters:

MNFaceClusters & fclust

A list of face clusters. See the constructors in class MNFaceClusters and the face cluster related methods of class MNTempData for information on how to set up these clusters based on edge angles and face flags.

int cl

The cluster we wish to extrude.

Returns

True if any faces were extruded, false if nothing happened.

DllExport bool ExtrudeFaces

(

DWORD

flag = MN_SEL

)

Performs the topological component of an extrusion on each flagged face individually.

(This differs from ExtrudeFaceClusters in that each face is treated like its own cluster.) Extrusion means that the vertices and edges used by each flagged face are cloned, and new faces and edges are created on the "sides" to connect the clones to their originals. (Note that nothing is moved in this process - movement is handled separately. See GetExtrudeDirection for details.)

Parameters:

DWORD flag=MN_SEL

The flag that identifies the faces we wish to extrude.

Returns

True if any faces were extruded, false if nothing happened.

DllExport void GetExtrudeDirection	(	MNChamferData *	mcd,
		DWORD	faceFlag
	)

DllExport void GetExtrudeDirection	(	MNChamferData *	mcd,
		MNFaceClusters *	fclust = NULL,
		Point3 *	clustNormals = NULL
	)

Finds the direction vectors for the geometric component of an extrusion after the topological component has been completed.

(See methods ExtrudeFaceClusters, ExtrudeFaceCluster, and ExtrudeFaces for details on the topological component.)

Parameters:

MNChamferData *mcd

The data structure in which the extrusion directions are stored. (Note that there is no map support for this operation, as there is no well-defined way to modify mapping values during an extrusion drag.)

MNFaceClusters *fclust = NULL

The face clusters.

Point3 *clustNormals = NULL

The cluster normals.

This information is only needed if we're extruding by cluster normals. If we're extruding clusters by local normals or just extruding faces separately, these parameters can be left at NULL. See class MNTempData for handy methods to obtain cluster normals.

DllExport bool ExtrudeVertices	(	DWORD	vertexFlag,
		MNChamferData *	pMCD,
		Tab< Point3 > &	tUpDir
	)

This computes the new extruded vertices from the selected vertices using the using the current vertex selection.

MNChamferData *pChamData = NULL;
pChamData = MNTempData (&mnMesh);
float height, width;
Tab<Point3> tUpDir, tDelta;
if (!mnMesh.ExtrudeEdges (flag, pChamData, tUpDir)) return false;

// Apply map changes based on base width:
for (mapChannel=-NUM_HIDDENMAPS; mapChannel<mesh.numm; mapChannel++) {
 if (mesh.M(mapChannel)->GetFlag (MN_DEAD)) continue;
 pChamData->GetMapDelta (mesh, mapChannel, width, tMapDelta);
 UVVert *pMapVerts = mesh.M(mapChannel)->v;
 if (!pMapVerts) continue;
 for (i=0; i<mesh.M(mapChannel)->numv; i++) pMapVerts[i] += tMapDelta[i];
}

// Apply geom changes based on base width:
pChamData->GetDelta (width, tDelta);
for (i=0; i<mesh.numv; i++) mesh.v[i].p += tDelta[i];

// Move the points up:
for (i=0; i<tUpDir.Count(); i++) mesh.v[i].p += tUpDir[i]*height;    

Parameters

vertexFlag	Determines what vertices to extrude. To work on the selected edges set this to MN_SEL.
pMCD	The chamfer information which can be obtained from MNTempData.
tUpDir	The offset vector for the extrusion for each vertex.

Returns

Returns true is the extrude operation is completed successfully.

DllExport bool ExtrudeEdges	(	DWORD	edgeFlag,
		MNChamferData *	pMCD,
		Tab< Point3 > &	tUpDir
	)

Same as ExtrudeVertices() but is applied to the edges.

Computes the new extruded edges from the selected edges using the using the current edge selection.

MNChamferData *pChamData = NULL;
pChamData = MNTempData (&mnMesh);
float height, width;
Tab<Point3> tUpDir, tDelta;
if (!mnMesh.ExtrudeEdges (flag, pChamData, tUpDir)) return false;

// Apply map changes based on base width:
for (mapChannel=-NUM_HIDDENMAPS; mapChannel<mesh.numm; mapChannel++) {
    if (mesh.M(mapChannel)->GetFlag (MN_DEAD)) continue;
    pChamData->GetMapDelta (mesh, mapChannel, width, tMapDelta);
    UVVert *pMapVerts = mesh.M(mapChannel)->v;
    if (!pMapVerts) continue;
    for (i=0; i<mesh.M(mapChannel)->numv; i++) pMapVerts[i] += tMapDelta[i];
}

// Apply geom changes based on base width:
pChamData->GetDelta (width, tDelta);
for (i=0; i<mesh.numv; i++) mesh.v[i].p += tDelta[i];

// Move the points up:
for (i=0; i<tUpDir.Count(); i++) mesh.v[i].p += tUpDir[i]*height;

\param       edgeFlag Determines what edges to extrude. To work on the selected edges set this to MN_SEL.
\param       pMCD The chamfer information which can be obtained from MNTempData.
\param       tUpDir The offset vector for the extrusion for each vertex.
\return      Returns true is the extrude operation is completed successfully. 

DllExport bool ExtrudeFaceClusterAlongPath	(	Tab< Matrix3 >	tFrenets,
		MNFaceClusters &	fclust,
		int	clusterID,
		bool	align
	)

Extrudes a group of faces along a path defined by tFrenets.

Parameters

tFrenets	A spline that has been sampled down and at each sample a transform is computed.
fclust	A set of face clusters.
clusterID	The ID of the cluster to operate on.
align	Determines whether to align the extrusion to the cluster normal or the spline.

Returns

Returns true if the operation was successful or false otherwise.

DllExport bool SetVertColor	(	UVVert	clr,
		int	mapChannel,
		DWORD	flag = MN_SEL
	)

Sets vertex colors for the specified vertices.

This is done by finding all map vertices in the specified vertex color channel that correspond to each flagged vertex and setting them to the color given.

Parameters:

UVVert clr

The color to set the vertices to.

int mp

The map channel - use 0 for the standard vertex color channel, MAP_SHADING for the vertex illumination channel, or MAP_ALPHA for the alpha channel. (Note that alpha color values should always be shades of grey - clr.r should equal clr.g and clr.b.)

DWORD flag=MN_SEL

Indicates which vertices to modify the colors of.

Returns

Returns true if any vertex colors were modified.

DllExport bool SetFaceColor	(	UVVert	clr,
		int	mapChannel,
		DWORD	flag = MN_SEL
	)

Sets vertex colors for the specified faces.

This is done by finding all map vertices used by flagged faces and setting them to the color given. In cases where a map vertex is used by both a flagged and an unflagged face, the map vertex is split so that the unflagged faces' colors are unaffected by this change.

Parameters:

UVVert clr

The color to set the faces to.

int mp

The map channel - use 0 for the standard vertex color channel, MAP_SHADING for the vertex illumination channel, or MAP_ALPHA for the alpha channel. (Note that alpha color values should always be shades of grey - clr.r should equal clr.g and clr.b.)

DWORD flag=MN_SEL

Indicates which faces to modify the colors of.

Returns

Returns true if any vertex colors were modified.

DllExport bool ChamferVertices	(	DWORD	flag = MN_SEL,
		MNChamferData *	mcd = NULL
	)

Performs the topological component of a vertex chamfer on the flagged vertices, and provides the data needed to do the geometric component.

That is to say, this method clones the flagged vertices and creates the new edges and faces needed in a chamfer operation. It also determines the direction each vertex and mapping vertex will go as the user drags out the chamfer - but it doesn't actually move any vertices.

Parameters:

DWORD flag=MN_SEL

Indicates which vertices to chamfer.

MNChamferData *mcd=NULL

If non-NULL, this points to a data structure which should be filled with information needed to perform the geometric component of the chamfer, such as vertex directions and limits. See class MNChamferData for additional information.

Returns

True if any vertices were chamfered, false otherwise.

DllExport bool ChamferEdges	(	DWORD	flag = MN_SEL,
		MNChamferData *	mcd = NULL
	)

Performs the topological component of an edge chamfer on the flagged edges, and provides the data needed to do the geometric component.

That is to say, this method clones the flagged edges and creates the new vertices and faces needed in the edge chamfer operation. It also determines the direction each vertex and mapping vertex will go as the user drags out the chamfer - but it doesn't actually move anything.

Parameters:

DWORD flag=MN_SEL

Indicates which edges to chamfer.

MNChamferData *mcd=NULL

If non-NULL, this points to a data structure which should be filled with information needed to perform the geometric component of the chamfer, such as vertex directions and limits. If NULL, then this method returns false. See Class MNChamferData for additional information.

Returns

True if any edges were chamfered, false otherwise. Returns false if mcd == NULL.

DllExport bool QuadChamfer	(	float	amount,
		int	segments,
		float	tension,
		MN_QCHAM_TYPE	resultType,
		DWORD	flag = MN_SEL
	)

Performs a Quad Chamfer operation on the flagged edges using the original Max 2015 options and Max 2015 version of the Quad Chamfer algorithm.

To use a specific version of the Quad Chamfer algorithm (for backwards compatibility, for example), use the alternate method, below, which includes an optional 'version' parameter (see QCHAM_VERSION_XXX, above).

Parameters

amount	- Indicates how much distance to chamfer
segments	- Indicates how many segments to create on the chamfered edges (>0 for quads)
tension	- Indicates how much tension to apply to chamfer (0.0 - 1.0)
resultType	- Indicates what result is desired. QCHAM_CHAMFEREDOBJECT=chamfered object, QCHAM_NOCHAMFERS=object with chamfered edges removed, QCHAM_CHAMFERSONLY=object with chamfered edges only
flag	- Indicates which vertices to chamfer.

Returns

True if any edges were chamfered, false otherwise. New chamfer faces are flagged with MN_FACE_CREATED flags. Edges created from original edges being chamfered are flagged with MN_EDGE_WAS_PROCESSED flags.

DllExport bool QuadChamfer	(	float	amount,
		int	segments,
		float	tension,
		DWORD	optionFlags,
		MN_QCHAM_TYPE	resultType,
		DWORD	flag = MN_SEL,
		int	version = QCHAM_VERSION_LATEST
	)

Performs a Quad Chamfer operation on the flagged edges with options and versioning.

Parameters

amount	- Indicates how much distance to chamfer
segments	- Indicates how many segments to create on the chamfered edges (>0 for quads)
tension	- Indicates how much tension to apply to chamfer (0.0 - 1.0)
optionFlags	- Supplies chamfering options (see QCHAM_OPTION_XXX above).
resultType	- Indicates what result is desired. QCHAM_CHAMFEREDOBJECT=chamfered object, QCHAM_NOCHAMFERS=object with chamfered edges removed, QCHAM_CHAMFERSONLY=object with chamfered edges only
flag	- Indicates which vertices to chamfer.
version	- Indicates the version to use (see QCHAM_VERSION_XXX above). Optional; defaults to QCHAM_VERSION_LATEST (latest version)

Returns

True if any edges were chamfered, false otherwise. New chamfer faces are flagged with MN_FACE_CREATED flags. Edges created from original edges being chamfered are flagged with MN_EDGE_WAS_PROCESSED flags.

DllExport int CutFace	(	int	f1,
		Point3 &	p1,
		Point3 &	p2,
		Point3 &	Z,
		bool	split
	)

Implements the Editable Poly Cut algorithm from the face level - cuts from a point on one face to a point on another face.

Parameters:

int f1

The starting face of the Cut.

Point3 & p1

The starting point of the Cut, which should lie on face f1.

Point3 & p2

The end point of the Cut.

Point3 & Z

The view direction. All Cut algorithms require a view direction to establish the plane that the cut occurs in. This plane is defined by this Z vector and by the vector p2-p1. All new vertices created by the cut are in this plane.

bool split

If true, the faces on the top and bottom of the cut should have an open seam between them. All the edges and vertices along the cut (except for the first and last vertex) are split into two parts, one copy for the top and one for the bottom.

Returns

The last vertex created by the cut, or -1 if the cut was unable to finish.

DllExport int CutEdge	(	int	e1,
		float	prop1,
		int	e2,
		float	prop2,
		Point3 &	Z,
		bool	split
	)

Implements the Editable Poly Cut algorithm from the edge level - cuts from a point on one edge to a point on another edge.

Parameters:

int e1

The starting edge of the Cut.

float prop1

The proportion along edge e1 where the cut should begin. That is, the first point should be located at (1-prop1)*v[e[e1].v1].p + prop1*v[e[e1].v2].p.

int e2

The ending edge of the Cut.

float prop2

The proportion along edge e2 where the cut should end. That is, the last point should be located at (1-prop2)*v[e[e2].v1].p + prop2*v[e[e2].v2].p.

Point3 & Z

The view direction. All Cut algorithms require a view direction to establish the plane that the cut occurs in. This plane is defined by this Z vector and by the vector between the start and end points. All new vertices created by the cut are in this plane.

bool split

If true, the faces on the top and bottom of the cut should have an open seam between them. All the edges and vertices along the cut (except for the first and last vertex) are split into two parts, one copy for the top and one for the bottom.

Returns

The last vertex created by the cut, or -1 if the cut was unable to finish.

DllExport int CutEdge_Versioned	(	int	e1,
		float	prop1,
		int	e2,
		float	prop2,
		Point3 &	Z,
		bool	split,
		DWORD	ver
	)

Only call this method when you need to go back to a previous version of the code to load older files to maintain procedurality.

DllExport int Cut	(	int	startv,
		Point3 &	end,
		Point3 &	Z,
		bool	split
	)

Implements the Editable Poly Cut algorithm from the vertex level - cuts from one vertex to another.

Parameters:

int startv

The starting vertex of the Cut.

Point3 & end

The location of the end vertex of the Cut.

Point3 & Z

The view direction. All Cut algorithms require a view direction to establish the plane that the cut occurs in. This plane is defined by this Z vector and by the vector between the start and end points. All new vertices created by the cut are in this plane.

bool split

If true, the faces on the top and bottom of the cut should have an open seam between them. All the edges and vertices along the cut (except for the first and last vertex) are split into two parts, one copy for the top and one for the bottom.

Returns

The last vertex created by the cut, or -1 if the cut was unable to finish.

DllExport int Cut_Versioned	(	int	startv,
		Point3 &	end,
		Point3 &	Z,
		bool	split,
		DWORD	ver
	)

Only call this method when you need to go back to a previous version of the code to load older files to maintain procedurality.

DllExport void ApplyMapper	(	UVWMapper &	mapChannel,
		int	channel = 0,
		BOOL	useSel = FALSE
	)

Applies UVW Mapper to create the desired mapping in the specified channel.

Parameters:

UVWMapper & mp

The mapping scheme. See class UVWMapper for details.

BOOL channel=0

The channel to apply the map to. Channel 0 is normally the vertex color channel. Channels 1-99 are the normal user-accessible mapping channels. Channels MAP_SHADING and MAP_ALPHA are used for vertex illumination and alpha.

BOOL useSel=FALSE

Indicates whether the specified mapping should be applied only to selected faces (instead of the whole object). In cases where the map channel was previously unused, a default map will be applied to nonselected faces, and the specified map will be applied to the selected faces.

DllExport void InvalidateGeomCache

(

)

Invalidates information, like bounding box and face normals, that's dependent on Geometry.

Call after changing the geometry.

DllExport void InvalidateTopoCache

(

bool

in_clearCacheFlags = true

)

Clears out topology-dependent cache information.

Note that this method clears topology-dependent flags such as MN_MESH_FILLED_IN, and thus invalidates the edge list. If you have taken pains to preserve the integrity of your edge list, you should set the MN_MESH_FILLED_IN flag immediately after calling InvalidateTopoCache().

DllExport void UpdateDisplayVertexColors

(

)

This method is used to manage the display of vertex colors from any channel (or those that are passed in by some calling routine).

For instance, to set the mesh to display the Illumination channel as the current vertex colors, you would call SetDisplayVertexColors (MAP_SHADING). (Normally, it shows the standard vertex color channel, channel 0.) UpdateDisplayVertexColors() is used to refresh the vertex color pointers just before the MNMesh displays itself.

DllExport void SetDisplayVertexColors

(

int

chan

)

This method is used to manage the display of vertex colors from any channel (or those that are passed in by some calling routine).

For instance, to set the mesh to display the Illumination channel as the current vertex colors, you would call SetDisplayVertexColors (MAP_SHADING). (Normally, it shows the standard vertex color channel, channel 0.) UpdateDisplayVertexColors() is used to refresh the vertex color pointers just before the MNMesh displays itself.

Parameters:

int chan

The channel you wish to use.

DllExport void SetDisplayVertexColors	(	UVVert *	mv,
		MNMapFace *	mf
	)

If you have cached your own vertex color information that isn't in any of the map channels provided, you can use this method to set the internal pointers to use your data.

Parameters:

UVVert *mv

The array of UV vertices.

MNMapFace *mf

The map face data.

DllExport void PrepForPipeline

(

)

This method reconciles flags with arrays, checks and modifies data, ensures that the caches are consistent, and prepares the MNMesh pipeline.

For instance, if the MN_MESH_FILLED_IN flag is absent but there is still an edge array, this will free the edge array. This method is important to call if a MNMesh has been subjected to topology changing operations and should be called at the end of any operation on an MNMesh. Prepares MNMesh for pipeline. This just does a few basic checks and modifies data caches to be consistent. In particular it throws away the edge list if the MN_MESH_FILLED_IN flag is not set, and it frees any data in MN_DEAD map channels. This is a good method to call at the end of any operation on an MNMesh.

DllExport void allocRVerts

(

)

Allocates the "render vertices" used to optimize display routines.

Called by the system as needed.

DllExport void updateRVerts

(

GraphicsWindow *

gw

)

Fills in the render vertices with display coordinates based on the specified view.

DllExport void freeRVerts

(

)

Frees the "render vertices" used to optimize display routines.

void SetDispFlag ( DWORD  vflags )

inline

This method allows you to set the display flags.

See MNMesh Display Flags.

{ dispFlags |= vflags; }

DWORD GetDispFlag ( DWORD  vflags )

inline

This method returns the displFlags & f.

See MNMesh Display Flags.

{ return dispFlags & vflags; }

void ClearDispFlag ( DWORD  vflags )

inline

This method allows you to clear the specified display flags.

See MNMesh Display Flags.

{ dispFlags &= ~vflags; }

DllExport void render	(	GraphicsWindow *	gw,
		Material *	ma,
		RECT *	rp,
		int	compFlags,
		int	numMat = 1,
		InterfaceServer *	is = NULL
	)

Causes the MNMesh to display itself in the indicated GraphicsWindow.

Parameters:

GraphicsWindow *gw

Points to the graphics window to render to.

Material *ma

The list of materials to use to render the mesh. See Class Material.

RECT *rp

Specifies the rectangular region to render. If the mesh should be rendered to the entire viewport pass NULL.

int compFlags

One or more of the following flags:

COMP_TRANSFORM

Forces recalculation of the model to screen transformation; otherwise attempt to use the cache.

COMP_IGN_RECT

Forces all polygons to be rendered; otherwise only those intersecting the box will be rendered.

COMP_LIGHTING

Forces re-lighting of all vertices (as when a light moves); otherwise only re-light moved vertices

COMP_ALL

All of the above flags.

COMP_OBJSELECTED

If this bit is set then the node being displayed by this mesh is selected. Certain display flags only activate when this bit is set.

int numMat=1

The number of materials for the MNMesh.

DllExport void renderFace	(	GraphicsWindow *	gw,
		int	ff
	)

Displays the indicated face in the GraphicsWindow.

This method is usually called only by MNMesh::render().

Parameters:

GraphicsWindow *gw

The GraphicsWindow in which to display this face.

int ff

The face to display.

DllExport void render3DFace	(	GraphicsWindow *	gw,
		int	ff
	)

Displays the indicated face in the GraphicsWindow using hardware acceleration for texture and lighting if available.

This method is usually called only by MNMesh::render().

Parameters:

GraphicsWindow *gw

The GraphicsWindow in which to display this face.

int ff

The face to display.

DllExport void render3DDiagonals	(	GraphicsWindow *	gw,
		DWORD	compFlags
	)

Displays all face diagonals in the GraphicsWindow using hardware acceleration for texture and lighting if available.

See the render method for a description of the parameters. This method is usually called only by MNMesh::render().

DllExport void renderDiagonals	(	GraphicsWindow *	gw,
		DWORD	compFlags
	)

Displays all face diagonals in the GraphicsWindow.

See the render method for a description of the parameters. This method is usually called only by MNMesh::render().

DllExport void renderDiagonal	(	GraphicsWindow *	gw,
		int	ff,
		bool	useSegments = false,
		bool *	lastColorSubSel = NULL
	)

Displays diagonals for the specified face in the GraphicsWindow.

This method is usually called only by MNMesh::render().

Parameters:

GraphicsWindow *gw

The GraphicsWindow in which to display these diagonals.

int ff

The face to display the diagonals of.

bool useSegments = false

Indicates if we are in segment-drawing mode. See class GraphicsWindow, method segment() for details.

bool *lastColorSubSel=NULL

If non-NULL, it points to a bool variable which should be true if the last color set was the subobject selection color (GetSubSelColor()), and false if the color is set to the selected object color (GetSelColor()). This saves processing time that would be needed to switch between the two colors.

DllExport void render3DEdges	(	GraphicsWindow *	gw,
		DWORD	compFlags
	)

Displays all edges in the GraphicsWindow using hardware acceleration for texture and lighting if available.

See the render method for a description of the parameters. This method is usually called only by MNMesh::render().

DllExport void renderEdges	(	GraphicsWindow *	gw,
		DWORD	compFlags
	)

Displays all edges in the GraphicsWindow.

See the render method for a description of the parameters. This method is usually called only by MNMesh::render().

DllExport void renderEdge	(	GraphicsWindow *	gw,
		int	ee,
		bool	useSegments = false,
		bool *	lastColorSubSel = NULL
	)

Displays an edge in a GraphicsWindow.

This method is usually called only by MNMesh::render().

Parameters:

GraphicsWindow *gw

The GraphicsWindow in which to display this edge.

int ee

The edge to display.

bool useSegments = false

Indicates if we are in segment-drawing mode. See class GraphicsWindow, method segment() for details.

bool *lastColorSubSel=NULL

If non-NULL, it points to a bool variable which should be true if the last color set was the subobject selection color (GetSubSelColor()), and false if the color is set to the selected object color (GetSelColor()). This saves processing time that would be needed to switch between the two colors.

DllExport void ShallowCopy	(	MNMesh *	amesh,
		ChannelMask	channels
	)

See also

Object

DllExport void NewAndCopyChannels

(

ChannelMask

channels

)

DllExport void FreeChannels	(	ChannelMask	channels,
		BOOL	zeroOthers = 1
	)

DllExport IOResult Save

(

ISave *

isave

)

DllExport IOResult Load

(

ILoad *

iload

)

DllExport void ClearFlag

(

DWORD

fl

)

See also

FlagUser

DllExport BaseInterface* GetInterface ( Interface_ID  id )

virtual

See also

InterfaceServer

Reimplemented from BaseInterfaceServer.

DllExport void ReduceDisplayCaches

(

)

Forces all the derived data used to display the mesh to be deleted.

This data can be things like the gfx normals, the direct x mesh cache, tri stripping data etc.

DllExport bool NeedGWCacheRebuilt	(	GraphicsWindow *	gw,
		Material *	ma,
		int	numMat
	)

This returns whether the Graphics Cache for this object needs to be rebuilt.

Parameters:

GraphicsWindow *gw the active graphics window
Material *ma the material aray assigned to the mesh
int numMat the number of materials in the material array

DllExport void BuildGWCache	(	GraphicsWindow *	gw,
		Material *	ma,
		int	numMat,
		BOOL	threaded
	)

Builds the graphics window cached mesh.

Parameters:

GraphicsWindow *gw the active graphics window
Material *ma the material aray assigned to the mesh
int numMat the number of materials in the material array
BOOL threaded whether when building the cache it can use additional threads. This is needed since the system may be creating many meshes at the same time

DllExport void InvalidateHardwareMesh

(

DWORD

keepFlags = 0

)

This method can be used to invalidate any display-technology-specific caches of the MNMesh.

In particular, it's currently used to invalidate the DirectX cache of the mesh. This is important to call, for example, after changing Vertex Colors or Texture coordinates, if you don't already call InvalidateGeomCache (). "DWORD keepFlags" should be zero. We may someday add flags indicating that some parts of the hardware mesh cache should be kept, but for now, the whole cache is invalidated. (An example usage is in maxsdk/samples/mesh/EditablePoly\PolyEdOps.cpp.)

DllExport void SetStaticMesh

(

bool

staticMesh

)

Set the mesh or as static or not.

As static mesh has no animated channels. This allows certain display optimization since we know the mesh is not changing.

Parameters

[in]

staticMesh

Whether the mesh is to tagged static or not.

DllExport MNNormalSpec* GetSpecifiedNormals

(

)

Returns a pointer to the user-specified normal interface, if present.

Returns

A pointer to this mesh's MNNormalSpec interface, or NULL if the interface

has not been created in this mesh.

DllExport MNNormalSpec* GetSpecifiedNormalsForDisplay

(

)

Returns a non-NULL MNNormalSpec interface pointer only if the interface

is present, and is prepared for use in display - otherwise, it returns

NULL, and we fall back on the smoothing groups.

A MNNormalSpec is considered "prepared for display" only if the

MNNORMAL_NORMALS_BUILT and MNNORMAL_NORMALS_COMPUTED flags are set.

(See the MNNormalSpec methods BuildNormals and ComputeNormals.)

DllExport void ClearSpecifiedNormals

(

)

Clears out the specified normal interface, if present.

Removes it

completely, so it won't flow up the stack, etc.

DllExport void SpecifyNormals

(

)

Creates the user-specified normal interface in this mesh.

Initializes

the MNNormalSpec's "Parent" to this mesh, but does not allocate normal faces

or otherwise prepare the normals. Note that this interface will flow

up the pipeline, in the GEOM_CHANNEL and TOPO_CHANNEL channels.

DllExport void Transform

(

Matrix3 &

xfm

)

Transforms all vertices & hidden vertices by the Matrix xfm.

bool IsClosed ( )

inline

Figures out if this mesh is completely closed.

Meshes with the MN_MESH_RATSNEST flags are automatically considered open. Otherwise, each edge is checked to see if it has a face on both sides. If so, the mesh is closed. Otherwise, it's open.

{ for (int i=0; i<nume; i++) if (e[i].f2<0) return FALSE; return nume?TRUE:FALSE; } // o(n)

DllExport void Relax	(	float	relaxval,
		bool	targonly = TRUE
	)

Similar to the 3ds Max "Relax" modifier: this modifier moves each MNVert towards the average of all vertices to which it is connected (by MNEdges).

This is useful for tessellation algorithms.

Parameters:

float relaxval

The proportion to move it. If p is the original location of this vertex and q is the average point of all vertices it's connected to, this vertex is moved to p*(1-relaxval) + q*relaxval. A value of 0 generates no "relaxation", 1 is maximum relaxation, and values below 0 or above 1 generate non-relaxing results.

bool targonly

If this is set, only those MNVerts with the MN_TARG flag set will be moved.

DllExport bool LiftFaceClusterFromEdge	(	int	liftEdge,
		float	liftAngle,
		int	segments,
		MNFaceClusters &	fclust,
		int	clusterID
	)

Detaches the face cluster and rotates its around the hinge edge and fills in the gap.

Similar to MNMeshUtilities::HingeFromEdge() but requires a edge index instead of a point.

Parameters

liftEdge	The index of the edge that the face cluster is going to be hinged around.
liftAngle	An argument of type float.
segments	The number of segments for the sides of the extrusion.
fclust	A face cluster set.
clusterID	The specific face cluster to operate on.

Returns

Returns true if the operation was successful or false otherwise.

DllExport void SmoothByCreases

(

DWORD

creaseFlag

)

This is an auto-smooth algorithm that allows the developer to specify exactly which edges should be creases and which should be smoothed across.

All face smoothing groups are rewritten by this algorithm. This algorithm is used, for example, in MeshSmooth, NURMS style, when the user turns on "smooth result" and applies crease values to some edges.

Parameters:

DWORD creaseFlag

Indicates which edges should be treated as creases. Edges that have the flag (or flags) set should be creases. Those that don't should not be creases.

DllExport void GenerateRenderItems	(	MaxSDK::Graphics::IRenderItemContainer &	renderItems,
		const MaxSDK::Graphics::GenerateMeshRenderItemsContext &	generateRenderItemsContext
	)

Generate a set of render items according to the given render-item-generate context.

Remarks

Usually plugins use this function in their UpdateDisplay(). If plugins maintain copies of MNMesh, then they should use this function to convert those MNMesh instances to render items (RenderItemHandle). Converting MNMesh to Mesh via MNMesh::OutToTri() and then use the Mesh version of GenerateRenderItems is possible but not recommended because it causes unnecessary conversions and is very slow. This function generates mesh data immediately.

Parameters

renderItems	the container that accept newly generated render items.
generateRenderItemsContext	contains all the information that is used to generate all the required render items.

DllExport void GenerateDeferredRenderItems	(	MaxSDK::Graphics::IRenderItemContainer &	renderItems,
		const MaxSDK::Graphics::GenerateMeshRenderItemsContext &	generateRenderItemsContext
	)

Generate a set of render items according to the given render-item-generate context.

The mesh will be built in realize render item callback. So only use this function if the mesh is stable in current frame. It has better performance, because it only generates necessary data. For example, in wireframe mode, no normal data will be generated.

Remarks

Usually plugins use this function in their UpdateDisplay(). If plugins maintain copies of Mesh, then they should use this function to convert those mesh instances to render items (RenderItemHandle). Note for instance rendering: instance rendering is a way to draw many objects that use the same geometry. These objects shares same materials and modifiers. The only difference between objects is world transformation. You can specify a matrix array for the mesh, then the mesh will be drawn for many times. Each corresponds to a mesh in the array.

Parameters

renderItems	the container that accept newly generated render items.
generateRenderItemsContext	contains all the information that is used to generate all the required render items.

DllExport void FaceFindEdgeAdjacentFaces	(	int	faceIndex,
		BitArray &	adjacentFaces,
		IntTab &	adjacentFaceIndexes,
		bool	includeFaceIndex = false
	)

Create a map and list of faces adjacent to a given face's edges.

Given a face index, set bits in the provided BitArray corresponding to the faces that are adjacent to that face, sharing edges. Also append indexes of those faces to the provided IntTab.

Parameters

faceIndex	The index of the face to find adjacent faces for.
adjacentFaces	BitArray of faces, where bits will be set to indicate those faces which are adjacent. This BitArray should be initialized with the number of bits set to the number of faces in the mesh prior to calling the method, and the bits should be cleared, if desired. This method does NOT clear the bits itself, allowing the caller to call this method several times with different face indexes, building up an array and list of faces for later processing. If sequential calls to this method are made using different faceIndex parameters but reusing the adjacentFaces and adjacentFaceIndexes objects, DO NOT clear or alter the adjacentFaces BitArray between calls or the adjacentFaceIndexes list can contain duplicates.
adjacentFaceIndexes	IntTab that will have adjacent face indexes appended to it as they are found. This list is not sorted, and there will only be one entry per adjacent face (no duplicates).
includeFaceIndex	When true, include 'faceIndex' face in adjacentFaceIndexes list. Defaults to false (doesn't include it).

DllExport void FaceFindAdjacentFaces	(	int	faceIndex,
		BitArray &	adjacentFaces,
		IntTab &	adjacentFaceIndexes,
		bool	includeFaceIndex = false
	)

Create a map and list of faces adjacent to a given face.

Given a face index, set bits in the provided BitArray corresponding to the faces that are adjacent to that face, sharing either edges or vertices. Also append indexes of those faces to the provided IntTab.

Parameters

faceIndex	The index of the face to find adjacent faces for.
adjacentFaces	BitArray of faces, where bits will be set to indicate those faces which are adjacent. This BitArray should be initialized with the number of bits set to the number of faces in the mesh prior to calling the method, and the bits should be cleared, if desired. This method does NOT clear the bits itself, allowing the caller to call this method several times with different face indexes, building up an array and list of faces for later processing. If sequential calls to this method are made using different faceIndex parameters but reusing the adjacentFaces and adjacentFaceIndexes objects, DO NOT clear or alter the adjacentFaces BitArray between calls or the adjacentFaceIndexes list can contain duplicates.
adjacentFaceIndexes	IntTab that will have adjacent face indexes appended to it as they are found. This list is not sorted, and there will only be one entry per adjacent face (no duplicates).
includeFaceIndex	When true, include 'faceIndex' face in adjacentFaceIndexes list. Defaults to false (doesn't include it).

DllExport void VertexFindAdjacentFaces	(	int	vertexIndex,
		BitArray &	adjacentFaces,
		IntTab &	adjacentFaceIndexes
	)

Create a map and list of faces adjacent to a vertex.

Given a vertex index, set bits in the provided BitArray corresponding to the faces that use that vertex. Also append indexes of those faces to the provided IntTab.

Parameters

vertexIndex	The index of the vertex to find adjacent faces for.
adjacentFaces	BitArray of faces, where bits will be set to indicate those faces which are adjacent. This BitArray should be initialized with the number of bits set to the number of faces in the mesh prior to calling the method, and the bits should be cleared, if desired. This method does NOT clear the bits itself, allowing the caller to call this method several times with different vertex indexes, building up an array and list of faces for later processing. If sequential calls to this method are made using different vertexIndex parameters but reusing the adjacentFaces and adjacentFaceIndexes objects, DO NOT clear or alter the adjacentFaces BitArray between calls or the adjacentFaceIndexes list can contain duplicates.
adjacentFaceIndexes	IntTab that will have adjacent face indexes appended to it as they are found. This list is not sorted, and there will only be one entry per adjacent face (no duplicates).

bool checkFaceSel	(	int	face_i,
		Mesh_SelParams &	params
	)

Invoke these methods to check the Sub-Objects associated with the face indexed by face_i is in the hit region.

The detailed parameters are in SelectionCheckParams structure. Currently these methods are not exposed in SDK.

bool checkFaceEdgesSel	(	int	face_i,
		Mesh_SelParams &	params
	)

bool checkFaceDiagonalSel	(	int	face_i,
		Mesh_SelParams &	params
	)

bool checkVertSel	(	int	vert_i,
		Mesh_SelParams &	params
	)

bool checkFaceBackFacing	(	int	face_i,
		Mesh_SelParams &	params
	)

DllExport bool IsAccelDataDirty

(

)

Checks if the space accelerating data is up-to-date.

Remarks

Invoking InvalidateGeomCache() or InvalidateTopologyCache() will dirty the space accelerating data.

DllExport void DirtyAccelData

(

)

Update the space accelerating data.

Remarks

This function should only be invoked when the plug-in needs to invoke following methods before InvalidateGeomCache() or InvalidateTopologyCache() gets invoked.

DllExport BOOL select	(	GraphicsWindow *	gw,
		Material *	ma,
		HitRegion *	hr,
		int	abortOnHit = FALSE,
		int	numMat = 1
	)

Checks the given HitRegion to see if it intersects this Mesh object.

Parameters:

GraphicsWindow *gw

Points to the graphics window to check.

Material *ma

The list of materials for the mesh.

HitRegion *hr

This describes the properties of a region used for the hit testing. See Class HitRegion.

int abortOnHit = FALSE

If nonzero, the hit testing is complete after any hit. Note that although there is only one object to hit, setting this to TRUE prevents the algorithm from finding the closest hit on the MNMesh.

int numMat=1

The number of materials for the mesh.

Returns

TRUE if the item was hit; otherwise FALSE.

DllExport BOOL SubObjectHitTest	(	GraphicsWindow *	gw,
		Material *	ma,
		HitRegion *	hr,
		DWORD	flags,
		SubObjHitList &	hitList,
		int	numMat = 1
	)

This method may be called to perform sub-object hit testing on this mesh.

Parameters:

GraphicsWindow *gw

The graphics window associated with the viewport the mesh is being hit tested in.

Material *ma

The list of materials for the mesh. See Class Material

HitRegion *hr

This describes the properties of a region used for the hit testing. See Class HitRegion.

DWORD flags

Flags for sub object hit testing. One or more of the following values:

SUBHIT_MNUSECURRENTSEL

When this bit is set, the sel only and unsel only tests will use the current level (edge or face) selection when doing a vertex level hit test.) This is like the Mesh hit-testing flag SUBHIT_USEFACESEL.

SUBHIT_MNVERTS

SUBHIT_MNFACES

SUBHIT_MNEDGES

SUBHIT_MNTYPEMASK (SUBHIT_MNVERTS|SUBHIT_MNFACES|SUBHIT_MNEDGES)

SubObjHitList& hitList

The results are stored here. See Class SubObjHitList.

int numMat=1

The number of materials for the mesh.

Returns

TRUE if the item was hit; otherwise FALSE.

DllExport int IntersectRay	(	Ray &	ray,
		float &	at,
		Point3 &	norm
	)

Provides the intersection point and normal for the ray with this mesh.

Parameters:

Ray & ray

The ray we want an intersection point for.

float & at

This is filled in with a value giving the intersection point along the ray. (The actual point is computed by ray.p + ray.dir*at.)

Point3 & norm

Filled in with the surface normal at the intersection point.

Returns

Returns TRUE if an intersection point was found, or FALSE if the ray doesn't intersect this MNMesh.

DllExport int IntersectRay	(	Ray &	ray,
		float &	at,
		Point3 &	norm,
		int &	fi,
		Tab< float > &	bary
	)

Provides the intersection point and normal for the ray with this mesh.

Parameters:

Ray & ray

The ray we want an intersection point for.

float & at

This is filled in with a value giving the intersection point along the ray. (The actual point is computed by ray.p + ray.dir*at.)

Point3 & norm

Filled in with the surface normal at the intersection point.

int & fi

Filled in with the face index for the face that was hit by the ray.

Tab<float> & bary

Filled in with the "generalized barycentric coordinates" of the intersection point on the face. This is a table of floats of size f[fi].deg, where each float represents the contribution of the corresponding face vertex, and where the floats all sum to 1.

Returns

Returns TRUE if an intersection point was found, or FALSE if the ray doesn't intersect this MNMesh.

DllExport const float* IntersectRay	(	Ray &	ray,
		float &	at,
		Point3 &	norm,
		int &	fi
	)

Similiar to above overrided function with the difference of having the barycentric coordinates as the function returned result.

In case of no hit it will return nullptr. This function guarantees the returned array has enough space that matches the degree of the face. It is suggested to use this function because it does not require intermediate memory allocation. This function is implemented to be thread safe.

DllExport Point3 ComputeRenderNormal	(	int	face_i,
		int	corner
	)

This function computes the render normal for the specified face and corner.

Unlike the method of buildNormals() and buildRenderNormals(), this function does not rely on whole RVertex array to achieve normal computation, which means it is lightweight and it quite efficent to do the normal computation for a given face and corner index. The only limitation is that this function will update the space accelerating structure if it is needed.

Parameters

face_i	The index to the face.
corner	The corner index within the face(must between 0 and 2 inclusively)

DllExport Point3 ComputeInterpolatedRenderNormal	(	int	face_i,
		const float *	bary
	)

This function computes the interpolated normals regarding the barycentric coordinates.

Parameters

face_i	The index to the face.
bary	The input barycentric coordinates to compute the interpolated normal. It must point to an array of float that have large size than face degree.

DllExport void* GetSpaceAccelHandle

(

)

Friends And Related Function Documentation

friend class HardwareMNMesh

friend

friend class MNNormalSpec

friend

friend class MNMeshUtilites8Impl

friend

friend class MNMeshUtilities10Impl

friend

friend class MNMeshFGBGObject

friend

friend class IMNMeshLegacySnap

friend

friend class MaxSDK::Graphics::EditablePolyMeshNormalChannel

friend

void gfxCleanup ( void *  data )

friend

Member Data Documentation

MNVert* v

The array of vertices.

MNEdge* e

The array of edges.

MNFace* f

The array of faces;.

int numv

Number of MNVert elements in v.

int nume

Number of MNEdge elements in e.

int numf

Number of MNFace elements in f.

int numm

PerData* vd

The array of PerData objects which maintain and provide access to the floating point vertex data.

There is one of these for each supported channel. PerData objects are used to store such information as vertex weighting and weighted selections.

BitArray vdSupport

This bit array indicates if a particular vertex data channel is supported in this MNMesh.

If the bit is set the channel is supported.

PerData* ed

The array of PerData objects which maintain and provide access to the floating point edge data.

There is one of these for each supported channel. One PerData object store edge weighting for NURMS-type MeshSmooths.

BitArray edSupport

This bit array indicates if a particular edge data channel is supported in this MNMesh.

If the bit is set the channel is supported.

int selLevel

The current MNMesh selection level.

See PMeshSelLevel.

DWORD dispFlags

Display flags.

See MNMesh Display Flags

Tab<int>* vedg

This is an array of int Tabs that records which edges use each vertex.

For instance, if edges 3, 5, and 6 have an endpoint at vertex 0, vedg[0] would include 3, 5, and 6, though not in any particular order. Note that this information is only valid if the MN_MESH_FILLED_IN flag is set.

Tab<int>* vfac

This is an array of int Tabs that records which faces touch each vertex.

For instance, if faces 0, 1, 3, 8, and 9 use vertex 0 as one of their corners, vfac[0] would include 0, 1, 3, 8, and 9, though not in any particular order. Note that this information is only valid if the MN_MESH_FILLED_IN flag is set.

const DWORD mCutVersion

static

This is the current version used for Cut and CutEdge and should be upped and documented when the cut code changes so edit poly can load the correct cut on older files to prevent them from breaking due to vertex reorder 1 : 2015 and older 2 : fixes a bug MAXX-19584 which was when a vertex and edge hit the same spot the edge would be picked causing a duplicate vertex, now the vertex is picked.