MSCustAttrib Class Reference

#include <mxsCustomAttributes.h>

Inheritance diagram for MSCustAttrib:

Public Member Functions
ScripterExport	MSCustAttrib ()
ScripterExport	MSCustAttrib (MSCustAttribDef *pc, BOOL loading)
ScripterExport	~MSCustAttrib ()
ScripterExport void	sprin1 (CharStream *s)
ScripterExport HWND	AddRollupPage (HINSTANCE hInst, const MCHAR *dlgTemplate, DLGPROC dlgProc, const MCHAR *title, LPARAM param=0, DWORD flags=0, int category=ROLLUP_CAT_CUSTATTRIB-1)
ScripterExport void	DeleteRollupPage (HWND hRollup)
ScripterExport IRollupWindow *	GetRollupWindow ()
ScripterExport void	RollupMouseMessage (HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam)
ReferenceTarget *	get_delegate ()
const MCHAR *	GetName ()
ScripterExport ParamDlg *	CreateParamDlg (HWND hwMtlEdit, IMtlParams *imp)
void	SetName (const MCHAR *newName)
BaseInterface *	GetInterface (Interface_ID id)
	Inherited from Animatable. More...
void	GetClassName (MSTR &s)
	Retrieves the (localizable) name of the plugin class. More...
Class_ID	ClassID ()
	Retrieves a constant that uniquely identifies the plugin class. More...
SClass_ID	SuperClassID ()
	Retrieves a constant representing the type of the plugin. More...
void	FreeCaches ()
int	NumSubs ()
Animatable *	SubAnim (int i)
MSTR	SubAnimName (int i)
int	NumParamBlocks ()
IParamBlock2 *	GetParamBlock (int i)
IParamBlock2 *	GetParamBlockByID (BlockID id)
BOOL	CanCopyAnim ()
ScripterExport void *	GetInterface (ULONG id)
	Inherited from Animatable. More...
ScripterExport void	DeleteThis ()
	Deletes an instance of this class. More...
ScripterExport void	BeginEditParams (IObjParam *ip, ULONG flags, Animatable *prev)
ScripterExport void	EndEditParams (IObjParam *ip, ULONG flags, Animatable *next)
RefResult	NotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID &partID, RefMessage message, BOOL propagate)
	Receives and responds to messages. More...
int	NumRefs ()
	Returns the total number of references this ReferenceMaker can hold. More...
RefTargetHandle	GetReference (int i)
	Returns the 'i-th' reference. More...
void	RefDeleted ()
	Called after a references to this is deleted. More...
RefTargetHandle	Clone (RemapDir &remap)
	This method is used by 3ds Max to clone an object. More...
ScripterExport IOResult	Save (ISave *isave)
	Called for saving data. More...
ScripterExport IOResult	Load (ILoad *iload)
	Called for loading data. More...
ScripterExport int	NumSubTexmaps ()
ScripterExport Texmap *	GetSubTexmap (int i)
ScripterExport void	SetSubTexmap (int i, Texmap *m)
ScripterExport MSTR	GetSubTexmapSlotName (int i)
int	MapSlotType (int i)
MSTR	GetSubTexmapTVName (int i)
ReferenceTarget *	GetRefTarget ()
Public Member Functions inherited from CustAttrib
	CustAttrib ()
virtual bool	CheckCopyAttribTo (ICustAttribContainer *to)
virtual SvGraphNodeReference	SvTraverseAnimGraph (IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
Public Member Functions inherited from ReferenceTarget
virtual BOOL	IsRefTarget ()
	Checks if this is a ReferenceTarget. More...
CoreExport RefResult	TestForLoop (const Interval &refInterval, RefMakerHandle hmaker)
	Tests for a cyclical reference. More...
CoreExport BOOL	HasDependents ()
	Checks if a ReferenceTarget has references. More...
CoreExport BOOL	HasRealDependents ()
	Checks if this has Real (Strong) Dependents. More...
void	BeginDependencyTest ()
	Starts Dependency Test. More...
BOOL	EndDependencyTest ()
	Ends Dependency Test. More...
virtual void	RefAdded (RefMakerHandle rm)
	Called after a reference is made to a target. More...
virtual void	RefAddedUndoRedo (RefMakerHandle rm)
	Called after a reference is made to a target because of undo or redo. More...
virtual void	RefDeletedUndoRedo ()
	Called after a references to this is deleted because of undo or redo. More...
CoreExport RefResult	DeleteAllRefsToMe ()
	Deletes all references to this ReferenceTarget. More...
CoreExport RefResult	TransferReferences (RefTargetHandle oldTarget, BOOL delOld=FALSE)
	Transfers all the references from oldTarget to this. More...
CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...
virtual CoreExport void	BaseClone (ReferenceTarget *from, ReferenceTarget *to, RemapDir &remap)
	This method copies base class data from an object to its clone. More...
virtual CoreExport RefResult	NotifyDependents (const Interval &changeInt, PartID partID, RefMessage message, SClass_ID sclass=NOTIFY_ALL, BOOL propagate=TRUE, RefTargetHandle hTarg=NULL, NotifyDependentsOption notifyDependentsOption=REFNOTIFY_ALLOW_OPTIMIZATIONS)
	Notify all dependent RefMakers concerned with the message. More...
void	FlagDependents (TimeValue t, PartID which=PART_PUT_IN_FG)
	This sends the REFMSG_FLAGDEPENDENTS message up the pipeline. More...
virtual void	NotifyForeground (TimeValue t)
	This method is called to flag dependents into the FG. More...
virtual void	NotifyTarget (int message, ReferenceMaker *hMaker)
	Sends messages to ReferenceTargets. More...
CoreExport	ReferenceTarget ()
	Constructor. More...
virtual CoreExport RefResult	AutoDelete ()
	Deletes the object when it has no more real dependents. More...
CoreExport RefResult	MaybeAutoDelete ()
	Deletes the object when it has no more real dependents. More...
Public Member Functions inherited from ReferenceMaker
CoreExport RefResult	ReplaceReference (int which, RefTargetHandle newtarg, BOOL delOld=TRUE)
	Used when cloning reference makers. More...
CoreExport RefResult	DeleteAllRefsFromMe ()
	Deletes all references from this ReferenceMaker. More...
CoreExport RefResult	DeleteAllRefs ()
	Deletes all references both to and from this item. More...
CoreExport RefResult	DeleteReference (int i)
	Deletes the specified reference. More...
virtual BOOL	CanTransferReference (int i)
	Tells whether this reference can be transfered. More...
CoreExport ReferenceSaveManager &	GetReferenceSaveManager ()
	Access the ReferenceSaveManager of this ReferenceMaker. More...
virtual int	RemapRefOnLoad (int iref)
	Used to load old files with references. More...
virtual CoreExport void	RescaleWorldUnits (float f)
	Rescale size of all world units in reference hierarchy. More...
virtual CoreExport void	EnumAuxFiles (AssetEnumCallback &assetEnum, DWORD flags)
	Enumerate auxiliary files (e.g. bitmaps) More...
virtual CoreExport void	SaveEnum (SaveEnumProc &sep, BOOL isNodeCall=0)
	The default save enumeration. More...
virtual CoreExport bool	SpecifySaveReferences (ReferenceSaveManager &referenceSaveManager)
	Used to specify reference slot remapping during scene file save. More...
CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...
CoreExport bool	EnumRefHierarchy (RefEnumProc &proc, bool includeCustAttribs=true, bool includeIndirectRefs=true, bool includeNonPersistentRefs=true, bool preventDuplicatesViaFlag=true)
	This method provides a general purpose reference enumerator. More...
CoreExport int	FindRef (RefTargetHandle rtarg)
	Get the index of the ReferenceTarget. More...
virtual BOOL	IsRefMaker ()
	Tells whether it is a ReferenceMaker. More...
virtual BOOL	IsRealDependency (ReferenceTarget *rtarg)
	Returns whether this is a "real" (strong) dependency or not. More...
virtual BOOL	ShouldPersistWeakRef (RefTargetHandle rtarg)
	Specifies whether a weak reference is to be persisted on a partial load or save. More...
CoreExport	ReferenceMaker ()
	Constructor. More...
CoreExport void	DeleteMe ()
	Deletes an instance of this class. More...
Public Member Functions inherited from Animatable
virtual int	NumChildren ()
virtual Animatable *	ChildAnim (int i)
virtual CoreExport MSTR	NodeName ()
virtual void	EditTrack ()
virtual CoreExport BOOL	SubAnimSetKeyBufferPresent (int subNum)
	returns true if the sub-anim has a "Set Key" buffer present More...
virtual BOOL	SetKeyBufferPresent ()
	returns true if there is a "Set Key" buffer present More...
virtual CoreExport void	SubAnimCommitSetKeyBuffer (TimeValue t, int subNum)
	Commit any "Set Key" buffers on the given sub-anim. More...
virtual void	CommitSetKeyBuffer (TimeValue t)
	Commit any "Set Key" buffers. More...
virtual CoreExport void	SubAnimRevertSetKeyBuffer (int subNum)
	Revert any "Set Key" buffers on the given sub-anim. More...
virtual void	RevertSetKeyBuffer ()
	Revert any "Set Key" buffers. More...
virtual LRESULT CALLBACK	TrackViewWinProc (HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam)
	This function is obsolete. More...
virtual bool	IsParamBlockDesc2Used (ParamBlockDesc2 *desc)
	Returns true if the passed description is being used. More...
virtual bool	GetMacroRecorderName (bool used_as_rhs_value, MSTR &objectSpecifiedName)
	This method is called to access the object specified name to use for the Maxscript macrorecorder. More...
CoreExport	Animatable ()
	Constructor. More...
MSTR	ClassName () const
	Returns the name of the plugin class. More...
virtual CoreExport void	ReleaseInterface (ULONG id, void *i)
virtual CoreExport int	SetProperty (ULONG id, void *data)
virtual CoreExport void *	GetProperty (ULONG id)
CoreExport void	AppendProperty (AnimProperty *prop)
	A function to directly add arbitrary properties to this object developers should ensure that the properties ID does not conflict with any Max-specific IDs. More...
CoreExport AnimProperty *	FindProperty (DWORD id)
	Find any property. More...
CoreExport void	AddAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid, DWORD len, void *data)
	Adds application/plugin specific (custom) data to an Animatable. More...
CoreExport AppDataChunk *	GetAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Retrieves the application/plugin specific (custom) data stored with an Animatable. More...
CoreExport BOOL	RemoveAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Deletes the application/plugin specific (custom) data stored with an Animatable. More...
CoreExport void	ClearAllAppData ()
	Deletes all application/plugin specific (custom) data stored with an Animatable. More...
virtual BOOL	CanDeleteSubAnim (int i)
virtual void	DeleteSubAnim (int i)
virtual DWORD	GetSubAnimCurveColor (int subNum)
virtual int	SubNumToRefNum (int subNum)
CoreExport int	HasSubElements (int type=0)
virtual int	GetSubFCurveExtents (int subNum, ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	The values max and min should be initialized before calling this function. More...
virtual ParamDimension *	GetParamDimension (int i)
virtual BOOL	SelectSubAnim (int subNum)
virtual BOOL	BypassTreeView ()
virtual BOOL	BypassTrackBar ()
virtual BOOL	BypassPropertyLevel ()
virtual BOOL	InvisibleProperty ()
virtual int	NumKeys ()
virtual TimeValue	GetKeyTime (int index)
virtual int	GetKeyIndex (TimeValue t)
virtual BOOL	GetNextKeyTime (TimeValue t, DWORD flags, TimeValue &nt)
virtual void	CopyKeysFromTime (TimeValue src, TimeValue dst, DWORD flags)
virtual void	DeleteKeyAtTime (TimeValue t)
virtual BOOL	IsKeyAtTime (TimeValue t, DWORD flags)
virtual int	GetKeyTimes (Tab< TimeValue > &times, Interval range, DWORD flags)
virtual int	GetKeySelState (BitArray &sel, Interval range, DWORD flags)
CoreExport void	OpenTreeEntry (int type, DWORD tv)
CoreExport void	CloseTreeEntry (int type, DWORD tv)
CoreExport int	IsTreeEntryOpen (int type, DWORD tv)
CoreExport BOOL	GetSelInTrackView (DWORD tv)
CoreExport void	SetSelInTrackView (DWORD tv, BOOL sel)
CoreExport BOOL	InTrackViewSelSet (int which)
CoreExport void	SetTrackViewSelSet (int which, BOOL inOut)
virtual BOOL	AssignController (Animatable *control, int subAnim)
virtual BOOL	CanAssignController (int subAnim)
	Return true if we can reassign the subanim specified. More...
virtual BOOL	CanMakeUnique ()
CoreExport int	EnumAnimTree (AnimEnum *animEnum, Animatable *client, int subNum)
virtual int	RenderBegin (TimeValue t, ULONG flags=0)
virtual int	RenderEnd (TimeValue t)
virtual CoreExport Interval	GetTimeRange (DWORD flags)
virtual void	EditTimeRange (Interval range, DWORD flags)
virtual void	DeleteTime (Interval iv, DWORD flags)
virtual void	ReverseTime (Interval iv, DWORD flags)
virtual void	ScaleTime (Interval iv, float s)
virtual void	InsertTime (TimeValue ins, TimeValue amount)
virtual BOOL	SupportTimeOperations ()
virtual CoreExport void	MapKeys (TimeMap *map, DWORD flags)
virtual void	DeleteKeys (DWORD flags)
virtual void	DeleteKeyByIndex (int index)
virtual void	SelectKeys (TrackHitTab &sel, DWORD flags)
virtual void	SelectSubKeys (int subNum, TrackHitTab &sel, DWORD flags)
virtual void	SelectSubCurve (int subNum, BOOL sel)
virtual void	SelectKeyByIndex (int i, BOOL sel)
virtual BOOL	IsKeySelected (int i)
virtual void	FlagKey (TrackHitRecord hit)
virtual int	GetFlagKeyIndex ()
virtual int	NumSelKeys ()
virtual void	CloneSelectedKeys (BOOL offset=FALSE)
virtual void	AddNewKey (TimeValue t, DWORD flags)
virtual void	MoveKeys (ParamDimensionBase *dim, float delta, DWORD flags)
virtual void	ScaleKeyValues (ParamDimensionBase *dim, float origin, float scale, DWORD flags)
virtual void	SelectCurve (BOOL sel)
virtual BOOL	IsCurveSelected ()
	Returns TRUE if the function curve is selected; otherwise returns FALSE. More...
virtual BOOL	IsSubCurveSelected (int subNum)
	Returns the selected state of the sub-curve whose index is passed. More...
virtual int	GetSelKeyCoords (TimeValue &t, float &val, DWORD flags)
virtual void	SetSelKeyCoords (TimeValue t, float val, DWORD flags)
virtual int	SetSelKeyCoordsExpr (ParamDimension *dim, const MCHAR *timeExpr, const MCHAR *valExpr, DWORD flags)
virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, int dx, int dy, DWORD flags)
virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, float angle, float length, DWORD flags)
virtual CoreExport BOOL	IsAnimated ()
virtual BOOL	CanCopyTrack (Interval iv, DWORD flags)
virtual BOOL	CanPasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)
virtual TrackClipObject *	CopyTrack (Interval iv, DWORD flags)
virtual void	PasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)
virtual BOOL	CanCopySubTrack (int subNum, Interval iv, DWORD flags)
virtual BOOL	CanPasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)
virtual TrackClipObject *	CopySubTrack (int subNum, Interval iv, DWORD flags)
virtual void	PasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)
virtual int	GetTrackVSpace (int lineHeight)
virtual int	HitTestTrack (TrackHitTab &hits, Rect &rcHit, Rect &rcTrack, float zoom, int scroll, DWORD flags)
virtual int	PaintTrack (ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)
virtual int	PaintSubTrack (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)
virtual int	PaintFCurves (ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	HitTestFCurves (ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	PaintSubFCurves (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	HitTestSubFCurves (int subNum, ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual void	EditTrackParams (TimeValue t, ParamDimensionBase *dim, const MCHAR *pname, HWND hParent, IObjParam *ip, DWORD flags)
virtual int	TrackParamsType ()
virtual int	GetFCurveExtents (ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	This method is called to calculate the largest and smallest values of the anim. More...
CoreExport void	AddNoteTrack (NoteTrack *note)
CoreExport void	DeleteNoteTrack (NoteTrack *note, BOOL delNote=TRUE)
CoreExport BOOL	HasNoteTracks ()
CoreExport int	NumNoteTracks ()
CoreExport NoteTrack *	GetNoteTrack (int i)
virtual void	FreeAllBitmaps ()
virtual void	GetSystemNodes (INodeTab &nodes, SysNodeContext Context)
virtual BOOL	IsSubClassOf (Class_ID classID)
	returns true if the animatable has sub-classed off the given class More...
virtual CoreExport void	MouseCycleCompleted (TimeValue t)
virtual CoreExport void	MouseCycleStarted (TimeValue t)
CoreExport bool	SvSaveData (ISave *isave, USHORT id)
CoreExport bool	SvLoadData (ILoad *iLoad)
CoreExport DWORD	SvGetRefIndex ()
CoreExport void	SvSetRefIndex (DWORD i)
CoreExport bool	SvDeleteRefIndex ()
CoreExport SvGraphNodeReference	SvStdTraverseAnimGraph (IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
virtual CoreExport bool	SvCanInitiateLink (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvCanConcludeLink (IGraphObjectManager *gom, IGraphNode *gNode, IGraphNode *gNodeChild)
virtual CoreExport MSTR	SvGetName (IGraphObjectManager *gom, IGraphNode *gNode, bool isBeingEdited)
virtual CoreExport bool	SvCanSetName (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvSetName (IGraphObjectManager *gom, IGraphNode *gNode, const MSTR &name)
virtual CoreExport bool	SvCanRemoveThis (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvRemoveThis (IGraphObjectManager *gom, IGraphNode *gNode)
	Called when the user deletes this object in the schematic view... More...
virtual CoreExport bool	SvIsSelected (IGraphObjectManager *gom, IGraphNode *gNode)
	Returns true if the object is selected in its schematic view. More...
virtual CoreExport bool	SvIsHighlighted (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport COLORREF	SvHighlightColor (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport COLORREF	SvGetSwatchColor (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvIsInactive (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvLinkChild (IGraphObjectManager *gom, IGraphNode *gNodeThis, IGraphNode *gNodeChild)
virtual CoreExport bool	SvHandleDoubleClick (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MultiSelectCallback *	SvGetMultiSelectCallback (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvCanSelect (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvEditProperties (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetTip (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetRefTip (IGraphObjectManager *gom, IGraphNode *gNode, IGraphNode *gNodeMaker)
virtual CoreExport bool	SvCanDetach (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvDetach (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetRelTip (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns a string to be displayed in the tip window in the schematic view for a relationship from "gNodeMaker" to "gNodeTarget"... More...
virtual CoreExport bool	SvCanDetachRel (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns true if this object can respond to the SvDetachRel(...) method... More...
virtual CoreExport bool	SvDetachRel (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Detach this relationship. More...
virtual CoreExport bool	SvHandleRelDoubleClick (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Called when this relationship is double-clicked in the schematic view... More...
CoreExport ICustAttribContainer *	GetCustAttribContainer ()
	This method returns a pointer to the custom attributes container interface class. More...
CoreExport void	AllocCustAttribContainer ()
	This method allocates space for a custom attributes container. More...
CoreExport void	DeleteCustAttribContainer ()
	This method deletes space used by a custom attributes container. More...
void	SetAFlag (DWORD mask)
void	ClearAFlag (DWORD mask)
	Clears one or more bits in the Animatable flags. More...
bool	TestAFlag (DWORD mask) const
	Tests one or more bits in the Animatable flags. More...
void	SetAFlagEx (DWORD mask)
	Sets one or more bits in the Animatable extended flags. More...
void	ClearAFlagEx (DWORD mask)
	Clears one or more bits in the Animatable extended flags. More...
bool	TestAFlagEx (DWORD mask) const
	Tests one or more bits in the Animatable extended flags. More...
CoreExport bool	TestFlagBit (int index)
	Tests the specified flag bit. More...
CoreExport void	SetFlagBit (int index, bool newValue=true)
	Sets the specified flag bit. More...
CoreExport void	ClearFlagBit (int index)
	Clears the specified flag bit. More...
Public Member Functions inherited from InterfaceServer
virtual UtilExport	~InterfaceServer ()
	Destructor. More...
Public Member Functions inherited from ISubMap
virtual	~ISubMap ()
virtual int	SubTexmapOn (int i)
CoreExport MSTR	GetSubTexmapTVName (int i)
virtual BOOL	SetDlgThing (ParamDlg *dlg)
CoreExport void	CopySubTexmap (HWND hwnd, int ifrom, int ito)

Public Attributes
IObjParam *	cip
IMtlParams *	mip
MSTR	name

Static Public Attributes
static MSAutoMParamDlg *	masterMDlg
Static Public Attributes inherited from Animatable
static const AnimHandle	kInvalidAnimHandle = 0

Protected Member Functions
virtual void	SetReference (int i, RefTargetHandle rtarg)
	Stores a ReferenceTarget as its 'i-th' reference`. More...
Protected Member Functions inherited from ReferenceTarget
virtual CoreExport int	DoEnumDependentsImpl (DependentEnumProc *dep)
	Method to perform an enumeration on a ReferenceTarget. More...
virtual CoreExport	~ReferenceTarget ()=0
	Destructor. More...
Protected Member Functions inherited from ReferenceMaker
virtual CoreExport	~ReferenceMaker ()=0
	Destructor. More...
void	BlockEval ()
void	UnblockEval ()
int	Evaluating ()
CoreExport RefResult	StdNotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID partID, RefMessage message, BOOL propagate, NotifyDependentsOption notifyDependentsOption)
Protected Member Functions inherited from Animatable
virtual CoreExport	~Animatable ()=0
	Destructor. More...
Protected Member Functions inherited from Noncopyable
	Noncopyable ()
	~Noncopyable ()

Additional Inherited Members
Static Public Member Functions inherited from Animatable
static CoreExport BOOL	IsDeleted (Animatable *anim)
	Debug method to determine whether an object has been deleted. More...
static CoreExport AnimHandle	GetHandleByAnim (Animatable *anim)
	Get the unique handle for an Animatable object. More...
static CoreExport Animatable *	GetAnimByHandle (AnimHandle handle)
	Get an Animatable object from its unique handle. More...
static CoreExport void	EnumerateAllAnimatables (EnumAnimList &enumProcObject)
	Enumerator to enumerate across all animatables. More...
static CoreExport bool	RegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	UnRegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	RegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	UnRegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport int	RequestFlagBit ()
	Requests an unique flag bit index. More...
static CoreExport void	ReleaseFlagBit (int index)
	Releases the flag bit index. More...
static CoreExport void	ClearFlagBitInAllAnimatables (int index)
	Clears the specified flag bit in all Animatables. More...
Static Public Member Functions inherited from MaxHeapOperators
static UtilExport void *	operator new (size_t size)
	Standard new operator used to allocate objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e)
	Standard new operator used to allocate objects if there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate objects that takes the type of memory, filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate arrays of objects. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void	operator delete (void *ptr)
	Standard delete operator used to deallocate an object If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an object If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an object that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, void *placement_ptr)
	Placement new operator. More...
static UtilExport void	operator delete (void *ptr, void *placement_ptr)
	Placement delete operator. More...
static UtilExport void *	aligned_malloc (size_t size, size_t alignment)
	Allocates memory on a specified alignment boundary. More...
static UtilExport void *	aligned_realloc (void *ptr, size_t size, size_t alignment)
	Reallocates memory on a specified alignment boundary. More...
static UtilExport void	aligned_free (void *ptr)
	Frees a block of memory that was allocated with aligned_malloc/aligned_realloc. More...
Protected Attributes inherited from Animatable
DWORD	aflag
AnimPropertyList	aprops

Constructor & Destructor Documentation

ScripterExport MSCustAttrib ( )

inline

: cip(NULL), mip(NULL) { }

ScripterExport MSCustAttrib	(	MSCustAttribDef *	pc,
		BOOL	loading
	)

ScripterExport ~MSCustAttrib ( )

inline

{ DeleteAllRefsFromMe(); }

Member Function Documentation

ScripterExport void sprin1

(

CharStream *

s

)

ScripterExport HWND AddRollupPage	(	HINSTANCE	hInst,
		const MCHAR *	dlgTemplate,
		DLGPROC	dlgProc,
		const MCHAR *	title,
		LPARAM	param = 0,
		DWORD	flags = 0,
		int	category = ROLLUP_CAT_CUSTATTRIB-1
	)

ScripterExport void DeleteRollupPage

(

HWND

hRollup

)

ScripterExport IRollupWindow* GetRollupWindow

(

)

ScripterExport void RollupMouseMessage	(	HWND	hDlg,
		UINT	message,
		WPARAM	wParam,
		LPARAM	lParam
	)

ReferenceTarget* get_delegate ( )

inline

{ return NULL; }  // no delegates in MSCustAttribs 

const MCHAR* GetName ( )

inlinevirtual

Remarks

A CustAttrib plugin can implement this method in order to provide the name that gets displayed in the TrackView.

Default Implementation:

{ return "Custom Attribute";}

Reimplemented from CustAttrib.

{ return name; } 

ScripterExport ParamDlg* CreateParamDlg ( HWND  hwMtlEdit, IMtlParams *  imp  )

virtual

Remarks

This method gets called when the material or texture is to be displayed in the material editor parameters area. The plug-in should allocate a new instance of a class derived from ParamDlg to manage the user interface.

Parameters:

HWND hwMtlEdit

The window handle of the materials editor.

IMtlParams *imp

The interface pointer for calling methods in 3ds Max.

Returns

A pointer to the created instance of a class derived from ParamDlg.

Default Implementation:

{return NULL;}

Reimplemented from CustAttrib.

void SetName ( const MCHAR *  newName )

inline

{ name = newName ; }

BaseInterface* GetInterface ( Interface_ID  id )

virtual

Inherited from Animatable.

Returns a pointer to the Base Interface for the interface ID passed.

Parameters

id	- The unique ID of the interface to get

Returns

A Pointer to the Interface

Reimplemented from ReferenceTarget.

void GetClassName ( MSTR &  s )

inlinevirtual

Retrieves the (localizable) name of the plugin class.

This name is usually used internally for debugging purposes. For Material plug-ins this method is used to put up the material "type" name in the Material Editor.

Parameters

s	Reference to a string filled in with the name of the plugin class

Reimplemented from ReferenceTarget.

{ s = MSTR(pc->class_name->to_string()); }  

Class_ID ClassID ( )

inlinevirtual

Retrieves a constant that uniquely identifies the plugin class.

This method must return the unique ID for the plugin class. If two ClassIDs conflict, the system will only load the first conflicting one it finds. A program (gencid.exe) is provided to generate unique class id values.

Returns

A class id that uniquely identifies a plugin class

See also

Class ClassID, class ID definititions in plugapi.h.

Reimplemented from Animatable.

{ return pc->class_id; }

SClass_ID SuperClassID ( )

inlinevirtual

Retrieves a constant representing the type of the plugin.

Returns

A super class id that uniquely identifies the type (category) of the plugin. Note that several plugin classes can be of the same type, thus return the same super class id. Plugins are uniquely identified by their class ids.

See also

SClass_ID

Reimplemented from CustAttrib.

{ return pc->sclass_id; }

void FreeCaches ( )

inlinevirtual

Remarks

This is called to delete any item that can be rebuilt. For example, the procedural sphere object has a mesh that it caches. It could call Mesh::FreeAll() on the mesh from this method. This will free the vertex/face/uv arrays. If the sphere is ever evaluated again it can just rebuild the mesh. If an object (like a sphere) has modifiers applied to it, and those modifiers are not animated, then the result of the pipeline is cached in the node. So there is no reason for the sphere to also have a cache of its representation. Therefore when this method is called, the sphere can free the data of the mesh.

Default Implementation:

{}

Reimplemented from Animatable.

{ }         

int NumSubs ( )

inlinevirtual

Remarks

The system uses a virtual array mechanism to access the sub-anims of a plug-in. This method returns the total number of sub-anims maintained by the plug-in. If a plug-in is using a parameter block to manage its parameters it should just return 1 for all the parameters directed by the parameter block.

Returns

The number of sub-anims used by the plug-in.

Default Implementation:

{ return 0; }

Reimplemented from Animatable.

{ return pblocks.Count(); }  

Animatable* SubAnim ( int  i )

inlinevirtual

Remarks

This method returns a pointer to the 'i-th' sub-anim. If a plug-in is using a parameter block to manage all its parameters it should just return a pointer to the parameter block itself from this method. This method may return NULL so developers need to check the return value before calling other sub anim methods (such as SubAnimName()).

Parameters

i	This is the index of the sub-anim to return.

Default Implementation:

{ return NULL };

Reimplemented from Animatable.

{ return pblocks[i]; }

MSTR SubAnimName ( int  i )

inlinevirtual

Remarks

This method returns the name of the 'i-th' sub-anim to appear in track view. The system has no idea what name to assign to the sub-anim (it only knows it by the virtual array index), so this method is called to retrieve the name to display. Developer need to make sure the 'i-th' SubAnim() is non-NULL or this method will fail.

Parameters

i	The index of the parameter name to return

Returns

The name of the 'i-th' parameter.

Reimplemented from Animatable.

{ return pblocks[i]->GetLocalName(); }

int NumParamBlocks ( )

inlinevirtual

Remarks

This method is available in release 3.0 and later only.

This method returns the number of ParamBlock2s in this instance.

Default Implementation:

{ return 0; }

Reimplemented from Animatable.

{ return pblocks.Count(); }

IParamBlock2* GetParamBlock ( int  i )

inlinevirtual

Remarks

This method return 'i-th' ParamBlock2 in this instance (or NULL if not available).

Parameters

i	The zero based index of the ParamBlock2 to return.

Default Implementation:

{ return NULL; }

Reimplemented from Animatable.

{ return pblocks[i]; }

IParamBlock2* GetParamBlockByID ( BlockID  id )

inlinevirtual

Remarks

This method returns a pointer to the ParamBlock2 as specified by the ID passed (or NULL if not available).

Parameters

id	The BlockID of the ParamBlock2 instance.

Default Implementation:

{ return NULL; }

Reimplemented from Animatable.

{ return MSPlugin::GetParamBlockByID(id); }

BOOL CanCopyAnim ( )

inlinevirtual

Remarks

In addition to SubNumToRefNum(), if an anim doesn't want to be copied (via Track View or the Edit Modifier Stack 'Copy' button) it can return FALSE from this method, otherwise it can use the default implementation to return TRUE.

Default Implementation:

{return TRUE;}

Reimplemented from Animatable.

{ return FALSE; }

ScripterExport void* GetInterface ( ULONG  id )

virtual

Inherited from Animatable.

Returns a pointer to the interface.

Parameters

id	- The id of the interface.

Returns

A Pointer to the Interface

Reimplemented from ReferenceTarget.

ScripterExport void DeleteThis ( )

virtual

Deletes an instance of this class.

3ds Max calls this method when it needs to delete a plugin object (an instance of a class derived from Animatable). Similarly, plugins that need to delete instances of an Animatable or a class directly derived from it via an Animatable pointer, should call this method instead of calling directly operator delete. Following these rules will ensure that the same memory manager is used to allocate and deallocate the object. The default implementation of this method deletes the object. Plugin instances that never need to be deleted from the heap can overwrite this method to do nothing.

Note

See the method ClassDesc::Create() for details on how Max allocates plugin objects.

See ReferenceMaker::DeleteMe() and ReferenceTarget::MaybeAutoDelete() for information on how plugin instances are deleted by the system.

Remarks

See Memory Management.

See also

Required DLL Functions, Class ClassDesc.

Reimplemented from Animatable.

ScripterExport void BeginEditParams ( IObjParam *  ip, ULONG  flags, Animatable *  prev  )

virtual

Remarks

This method is called by the system when the user may edit the item's (object, modifier, controller, etc.) parameters.

Parameters

ip	Interface pointer. The developer can use it to call methods such as AddRollupPage(). Note that this pointer is only valid between BeginEditParams() and EndEditParams(). It should not be used outside this interval.
flags	Describe which branch of the command panel or dialog the item is being edited in. The following are possible values: BEGIN_EDIT_CREATE Indicates an item is being edited in the create branch. BEGIN_EDIT_MOTION Indicates a controller is being edited in the motion branch. BEGIN_EDIT_HIERARCHY Indicates a controller is being edited in the Pivot subtask of the hierarchy branch. BEGIN_EDIT_IK Indicates a controller is being edited in the IK subtask of the hierarchy branch. BEGIN_EDIT_LINKINFO Indicates a controller is being edited in the Link Info subtask of the hierarchy branch.
prev	Pointer to an Animatable object. This parameter may be used in the motion and hierarchy branches of the command panel. This pointer allows a plug-in to look at the ClassID of the previous item that was being edited, and if it is the same as this item, to not replace the entire UI in the command panel, but simply update the values displayed in the UI fields. This prevents the UI from 'flickering' when the current item begins its edit. For example, if you are in the motion branch and are looking at an item's PRS controller values, and then select another item that is displayed with a PRS controller, the UI will not change - only the values displayed in the fields will change. If however you selected a target camera that has a lookat controller (not a PRS controller) the UI will change because a different set of parameters need to be displayed. Note that for items that are edited in the modifier branch this field can be ignored.

Reimplemented from Animatable.

ScripterExport void EndEditParams ( IObjParam *  ip, ULONG  flags, Animatable *  next  )

virtual

Remarks

This method is called when the user is finished editing an objects parameters. The system passes a flag into the EndEditParams() method to indicate if the rollup page should be removed. If this flag is TRUE, the plug-in must un-register the rollup page, and delete it from the panel.

Parameters

ip	An interface pointer. The developer may use the interface pointer to call methods such as DeleteRollupPage().
flags	The following flag may be set: END_EDIT_REMOVEUI If TRUE, the item's user interface should be removed.
next	Animatable pointer. Can be used in the motion and hierarchy branches of the command panel. It allows a plug-in to look at the ClassID of the next item that was being edited, and if it is the same as this item, to not replace the entire UI in the command panel. Note that for items that are edited in the modifier branch this field can be ignored.

Reimplemented from Animatable.

RefResult NotifyRefChanged ( const Interval &  changeInt, RefTargetHandle  hTarget, PartID &  partID, RefMessage  message, BOOL  propagate  )

inlinevirtual

Receives and responds to messages.

A plugin which makes references must implement a method to receive and respond to messages broadcast by its dependents. This is done by implementing NotifyRefChanged(). The plugin developer usually implements this method as a switch statement where each case is one of the messages the plugin needs to respond to. The Method StdNotifyRefChanged calls this, which can change the partID to new value. If it doesn't depend on the particular message& partID, it should return REF_DONTCARE.

• For developer that need to update a dialog box with data about an object you reference note the following related to this method: This method may be called many times. For instance, say you have a dialog box that displays data about an object you reference. This method will get called many time during the drag operations on that object. If you updated the display every time you'd wind up with a lot of 'flicker' in the dialog box. Rather than updating the dialog box each time, you should just invalidate the window in response to the NotifyRefChanged() call. Then, as the user drags the mouse your window will still receive paint messages. If the scene is complex the user may have to pause (but not let up on the mouse) to allow the paint message to go through since they have a low priority. This is the way many windows in 3ds Max work.

Parameters

changeInt	- This is the interval of time over which the message is active. Currently, all plug-ins will receive FOREVER for this interval, with the exception of REFMSG_FLAGDEPENDENTS notifications. In that case, changeInt.Start() is the timepoint to perform the dependency test.
hTarget	- This is the handle of the reference target the message was sent by. The reference maker uses this handle to know specifically which reference target sent the message.
partID	- This contains information specific to the message passed in. Some messages don't use the partID at all. See the section List of Reference Messages for more information about the meaning of the partID for some common messages.
message	- The message parameters passed into this method is the specific message which needs to be handled.
propagate	- If called through ReferenceMaker::NotifyDependents(), the value of 'propagate' passed to it. Used if calling NotifyDependents() from within NotifyRefChanged().

Returns

The return value from this method is of type RefResult. This is usually REF_SUCCEED indicating the message was processed. Sometimes, the return value may be REF_STOP. This return value is used to stop the message from being propagated to the dependents of the item.

Implements ReferenceMaker.

                    { 
                        if (!(pc->mpc_flags & MPC_REDEFINITION))
                            return ((MSPlugin*)this)->NotifyRefChanged(changeInt, hTarget, partID, message, propagate); 
                        else
                            return REF_SUCCEED;
                    }

int NumRefs ( )

inlinevirtual

Returns the total number of references this ReferenceMaker can hold.

The plugin implements this method to indicate the total number of of references it can make. This includes all references whether they are NULL (inactive) or non-NULL (active) at the time when this method is called. A plugin can hold a variable number of references, thus the return value of this method is not to be cached and reused by client code.

Returns

The total number of references this plugin can hold. The default implementation is return 0.

Reimplemented from ReferenceMaker.

{ return pblocks.Count(); }

RefTargetHandle GetReference ( int  i )

inlinevirtual

Returns the 'i-th' reference.

The plugin implements this method to return its 'i-th' reference. The plug-in simply keeps track of its references using an integer index for each one. This method is normally called by the system.

Parameters

i	- The index of the reference to retrieve. Valid values are from 0 to NumRefs()-1.

Returns

The reference handle of the 'i-th' reference. Note that different calls to this method with the same 'i' value can result in different reference handles being retrieved, as the plugin changes the scene objects it references as its 'i-th' reference.

Reimplemented from ReferenceMaker.

{ return pblocks[i]; }

virtual void SetReference ( int  i, RefTargetHandle  rtarg  )

inlineprotectedvirtual

Stores a ReferenceTarget as its 'i-th' reference`.

The plugin implements this method to store the reference handle passed to it as its 'i-th' reference. In its implementation of this method, the plugin should simply assign the reference handle passed in as a parameter to the member variable that holds the 'i-th' reference. Other reference handling methods such as ReferenceMaker::DeleteReference(), or ReferenceMaker::ReplaceReference() should not be called from within this method. The plugin itself or other plugins should not call this method directly. The system will call this method when a new reference is created or an existing one is replaced by calling ReferenceMaker::ReplaceReference().

Parameters

i	- The index of the reference to store. Valid values are from 0 to NumRefs()-1.
rtarg	- The reference handle to store.

Reimplemented from ReferenceMaker.

                    { 
                        if (i >= pblocks.Count())
                            pblocks.SetCount(i+1); 
                        pblocks[i] = (IParamBlock2*)rtarg; 
                    }

void RefDeleted ( )

inlinevirtual

Called after a references to this is deleted.

This is called after deleting a reference to a reference target, in the case that the target was not deleted. When the last strong reference to a ReferenceTarget is removed, the ReferenceTarget is deleted, the destructor is called, and the memory cleared.

Reimplemented from ReferenceTarget.

{ MSPlugin::RefDeleted(); }

RefTargetHandle Clone ( RemapDir &  remap )

virtual

This method is used by 3ds Max to clone an object.

See also

CloneRefHierarchy(), class RemapDir This method is called by 3ds Max to have the plugin clone itself. The plug-in's implementation of this method should copy both the data structure and all the data residing in the data structure of this reference target. The plugin should clone all its references as well. Also, the plug-in's implementation of this method must call BaseClone(). In order for classes derived from this class to clone cleanly, the Clone method should just create the new instance, and then call an implementation of BaseClone that clones the references and copies any other necessary data. For example:

class MyDerivedPlugin
    : public MyBasePlugin
{
    const int MY_REFERENCE = 1;

    ReferenceTarget* Clone(RemapDir& remap)
    {
        ReferenceTarget* result = new MyDerivedPlugin();
        BaseClone(this, result, remap);
        return result;
    }

    void BaseClone(ReferenceTarget* from, ReferenceTarget* to, RemapDir& remap)
    {
        if (!to || !from || from == to)
            return;    
        MyBasePlugin::BaseClone(from, to, remap);
        to->ReplaceReference(MY_REFERENCE, remap->CloneRef(from->GetReference(MY_REFERENCE)));
    }
};

This method should not be directly called by plug-ins. Instead, either RemapDir::CloneRef() or CloneRefHierachy() should be used to perform cloning. These methods ensure that the mapping from the original object to the clone is added to the RemapDir used for cloning, which may be used during backpatch operations

Note

See the remarks in method BaseClone() below.

Parameters

remap

- A RemapDir instance used for remapping references during a Clone.

Returns

A pointer to the cloned item.

Reimplemented from ReferenceTarget.

ScripterExport IOResult Save ( ISave *  isave )

virtual

Called for saving data.

Called by the system to allow the plugin to save its data.

Parameters

isave

- This pointer may be used to call methods to write data to disk. See the section on Loading and Saving Plug-in Data for an overview of the load/save process.

Returns

The default implementation is return IO_OK.

• IO_OK means the result was acceptable, with no errors.
• IO_ERROR This should be returned if an error occurred.

Reimplemented from ReferenceMaker.

ScripterExport IOResult Load ( ILoad *  iload )

virtual

Called for loading data.

Called by the system to allow the plug-in to load its data. See the section on Loading and Saving Plug-in Data for an overview of the load - save process.

Parameters

iload

- This interface pointer may be used to call methods to read data from disk.

Returns

The default implementation is return IO_OK.

• IO_OK means the result was acceptable, with no errors.
• IO_ERROR This should be returned if an error occurred.

Reimplemented from ReferenceMaker.

ScripterExport int NumSubTexmaps ( )

virtual

Remarks

Returns the number of sub-textures managed by this material or texture.

Default Implementation:

{ return 0; }

Reimplemented from ISubMap.

ScripterExport Texmap* GetSubTexmap ( int  i )

virtual

Remarks

Returns a pointer to the 'i-th' sub-texmap managed by the material or texture.

Note: For the 3ds Max Standard material, the sub-texmap indexes used with this method are listed in Texture Map Indices.

Parameters:

int i

Specifies the texmap to return.

Default Implementation:

{ return NULL; }

Reimplemented from ISubMap.

ScripterExport void SetSubTexmap ( int  i, Texmap *  m  )

virtual

Remarks

Stores the 'i-th' sub-texmap managed by the material or texture.

Note: For the 3ds Max Standard material, the sub-texmap indexes used with this method are listed in Texture Map Indices.

Parameters:

int i

The index of the storage for the texmap.

Texmap *m

The texmap to store.

Default Implementation:

{}

Reimplemented from ISubMap.

ScripterExport MSTR GetSubTexmapSlotName ( int  i )

virtual

Remarks

This method returns the slot name of the 'i-th' sub-texmap. This name appears in the materials editor dialog. For instance, if you are in a material and then you go down into a map, this is the name that appears just below the 'Get Material' icon. For example, in the Standard material when you choose one of the maps, the map name appears to let you know which slot you are working on. For the Standard material, this may be "Ambient", "Diffuse", "Specular", etc.

Parameters:

int i

Specifies the slot whose name is returned.

Default Implementation:

The default implementation returns an empty ("") string.

Reimplemented from ISubMap.

int MapSlotType ( int  i )

inlinevirtual

Remarks

In the Coordinates rollup in the user interface for a texture map are two options. These options are Texture or Environment. The slot type is one of these two options, texture coordinates or environment coordinates. There are a variety of texture coordinate types. There are the type assigned to the object and the environment type (Spherical, Cylindrical, Shrink-wrap, Screen). This method is used to determine the type required by the particular sub-texture. This is either texture coordinates (MAPSLOT_TEXTURE) or environment coordinates (MAPSLOT_ENVIRON).

Parameters:

int i

The index of the sub-texture whose slot type to return.

Returns

See Map Slot Types.

Default Implementation:

{ return MAPSLOT_TEXTURE; }

Implements ISubMap.

{ UNUSED_PARAM(i); return MAPSLOT_TEXTURE; }

MSTR GetSubTexmapTVName ( int  i )

inline

{ return GetSubTexmapSlotName(i); }

ReferenceTarget* GetRefTarget ( )

inlinevirtual

Remarks

Implemented by the System.

The implementation of this method is provided by MtlBase. It returns its this pointer.

Implements ISubMap.

{ return this; }

Member Data Documentation

IObjParam* cip

MSAutoMParamDlg* masterMDlg

static

IMtlParams* mip

MSTR name