Sampler Class Reference

#include <samplers.h>

Class Description

See also

Class SpecialFX, Class SamplingCallback, Class SFXParamDlg, Class ShadeContext, Class Point3, Class Point2, Class ILoad, Class ISave.

Description:

This is the base class for the creation of Sampler plug-ins which work with the Standard material. These appear in the Super Sampling rollout in the Sampler dropdown. They have an Enable checkbox and a Quality spinner for their user interface. An optional modal dialog may also be presented.

A Sampler is a plug-in that determines where inside a single pixel the shading and texture samples are computed. For some Samplers this pattern is the same for each pixel, for others a different pattern is chosen for each pixel. After determining the sample locations, the sampler calls back to the renderer to compute the shading values. It then averages the resluting shading values and returns its estimate of the final color.

Some Samplers are adaptive. This means that the Sampler decides on-the-fly how many samples to take to achieve its goal. There are many subtleties to adaptive Samplers and many ways to define the adaptive mechanism. The adaptive mechanism used by the R3 Samplers is very simple: take 4 samples, look for the maximum change in any of the color channels, if it's greater than the threshold, then sample the entire pixel according to the given quality. Threshold is an optional parameter that may, but need not be used by adaptive Samplers.

The transfer of control from 3ds Max to the Sampler plug-in is as follows: A Sampler is responsible for the sampling loop. It samples until it is done and computes the sum of its samples upon completion. Once the Sampler's DoSample() method is called 3ds Max no longer has control. This is how adaptive samplers are handled. The DoSample() routine will determine how often and where it samples, then it calls the provided SamplingCallback::SampleAtOffset() method to have 3ds Max compute the shading value.

Plug-In Information:

Class Defined In SAMPLER.H

Super Class ID SAMPLER_CLASS_ID

Standard File Name Extension DLH

Extra Include File Needed None

Inheritance diagram for Sampler:

Public Member Functions
RefResult	NotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID &partID, RefMessage message, BOOL propagate)
	Receives and responds to messages. More...
SClass_ID	SuperClassID ()
	Retrieves a constant representing the type of the plugin. More...
IOResult	Save (ISave *isave)
IOResult	Load (ILoad *iload)
virtual void	DoSamples (ShadeOutput *pOut, SamplingCallback *cb, ShadeContext *sc, MASK mask=NULL)=0
virtual int	GetNSamples ()=0
virtual void	SetQuality (float value)=0
virtual float	GetQuality ()=0
virtual int	SupportsQualityLevels ()=0
virtual void	SetEnable (BOOL samplingOn)=0
virtual BOOL	GetEnable ()=0
virtual const MCHAR *	GetDefaultComment ()=0
virtual ULONG	SupportsStdParams ()
virtual void	SetTextureSuperSampleOn (BOOL on)
virtual BOOL	GetTextureSuperSampleOn ()
virtual void	SetAdaptiveOn (BOOL on)
virtual BOOL	IsAdaptiveOn ()
virtual void	SetAdaptiveThreshold (float value)
virtual float	GetAdaptiveThreshold ()
virtual long	GetNOptionalParams ()
virtual MCHAR *	GetOptionalParamName (long nParam)
virtual float	GetOptionalParamMax (long nParam)
virtual float	GetOptionalParam (long nParam)
virtual void	SetOptionalParam (long nParam, float val)
virtual void	ExecuteParamDialog (HWND hWndParent, StdMat2 *mtl)
virtual BOOL	SetDlgThing (EffectParamDlg *dlg)
Public Member Functions inherited from SpecialFX
virtual MSTR	GetName ()
virtual BOOL	Active (TimeValue t)
virtual void	Update (TimeValue t, Interval &valid)
CoreExport IOResult	Save (ISave *isave)
CoreExport IOResult	Load (ILoad *iload)
virtual SFXParamDlg *	CreateParamDialog (IRendParams *ip)
virtual int	NumGizmos ()
virtual INode *	GetGizmo (int i)
virtual void	DeleteGizmo (int i)
virtual void	AppendGizmo (INode *node)
virtual BOOL	OKGizmo (INode *node)
virtual void	EditGizmo (INode *node)
virtual void	InsertGizmo (int i, INode *node)
CoreExport SvGraphNodeReference	SvTraverseAnimGraph (IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
Public Member Functions inherited from ReferenceTarget
virtual CoreExport void	GetClassName (MSTR &s)
	Retrieves the (localizable) name of the plugin class. More...
virtual BOOL	IsRefTarget ()
	Checks if this is a ReferenceTarget. More...
CoreExport RefResult	TestForLoop (const Interval &refInterval, RefMakerHandle hmaker)
	Tests for a cyclical reference. More...
CoreExport BOOL	HasDependents ()
	Checks if a ReferenceTarget has references. More...
CoreExport BOOL	HasRealDependents ()
	Checks if this has Real (Strong) Dependents. More...
void	BeginDependencyTest ()
	Starts Dependency Test. More...
BOOL	EndDependencyTest ()
	Ends Dependency Test. More...
virtual void	RefAdded (RefMakerHandle rm)
	Called after a reference is made to a target. More...
virtual void	RefAddedUndoRedo (RefMakerHandle rm)
	Called after a reference is made to a target because of undo or redo. More...
virtual void	RefDeleted ()
	Called after a references to this is deleted. More...
virtual void	RefDeletedUndoRedo ()
	Called after a references to this is deleted because of undo or redo. More...
CoreExport RefResult	DeleteAllRefsToMe ()
	Deletes all references to this ReferenceTarget. More...
CoreExport RefResult	TransferReferences (RefTargetHandle oldTarget, BOOL delOld=FALSE)
	Transfers all the references from oldTarget to this. More...
CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...
virtual CoreExport RefTargetHandle	Clone (RemapDir &remap)
	This method is used by 3ds Max to clone an object. More...
virtual CoreExport void	BaseClone (ReferenceTarget *from, ReferenceTarget *to, RemapDir &remap)
	This method copies base class data from an object to its clone. More...
virtual CoreExport RefResult	NotifyDependents (const Interval &changeInt, PartID partID, RefMessage message, SClass_ID sclass=NOTIFY_ALL, BOOL propagate=TRUE, RefTargetHandle hTarg=NULL, NotifyDependentsOption notifyDependentsOption=REFNOTIFY_ALLOW_OPTIMIZATIONS)
	Notify all dependent RefMakers concerned with the message. More...
void	FlagDependents (TimeValue t, PartID which=PART_PUT_IN_FG)
	This sends the REFMSG_FLAGDEPENDENTS message up the pipeline. More...
virtual void	NotifyForeground (TimeValue t)
	This method is called to flag dependents into the FG. More...
virtual void	NotifyTarget (int message, ReferenceMaker *hMaker)
	Sends messages to ReferenceTargets. More...
virtual CoreExport void *	GetInterface (ULONG id)
	Inherited from Animatable. More...
virtual CoreExport BaseInterface *	GetInterface (Interface_ID id)
	Inherited from Animatable. More...
CoreExport	ReferenceTarget ()
	Constructor. More...
virtual CoreExport RefResult	AutoDelete ()
	Deletes the object when it has no more real dependents. More...
CoreExport RefResult	MaybeAutoDelete ()
	Deletes the object when it has no more real dependents. More...
Public Member Functions inherited from ReferenceMaker
CoreExport RefResult	ReplaceReference (int which, RefTargetHandle newtarg, BOOL delOld=TRUE)
	Used when cloning reference makers. More...
CoreExport RefResult	DeleteAllRefsFromMe ()
	Deletes all references from this ReferenceMaker. More...
CoreExport RefResult	DeleteAllRefs ()
	Deletes all references both to and from this item. More...
CoreExport RefResult	DeleteReference (int i)
	Deletes the specified reference. More...
virtual BOOL	CanTransferReference (int i)
	Tells whether this reference can be transfered. More...
CoreExport ReferenceSaveManager &	GetReferenceSaveManager ()
	Access the ReferenceSaveManager of this ReferenceMaker. More...
virtual int	RemapRefOnLoad (int iref)
	Used to load old files with references. More...
virtual CoreExport void	RescaleWorldUnits (float f)
	Rescale size of all world units in reference hierarchy. More...
virtual CoreExport void	EnumAuxFiles (AssetEnumCallback &assetEnum, DWORD flags)
	Enumerate auxiliary files (e.g. bitmaps) More...
virtual CoreExport void	SaveEnum (SaveEnumProc &sep, BOOL isNodeCall=0)
	The default save enumeration. More...
virtual CoreExport bool	SpecifySaveReferences (ReferenceSaveManager &referenceSaveManager)
	Used to specify reference slot remapping during scene file save. More...
CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...
CoreExport bool	EnumRefHierarchy (RefEnumProc &proc, bool includeCustAttribs=true, bool includeIndirectRefs=true, bool includeNonPersistentRefs=true, bool preventDuplicatesViaFlag=true)
	This method provides a general purpose reference enumerator. More...
CoreExport int	FindRef (RefTargetHandle rtarg)
	Get the index of the ReferenceTarget. More...
virtual BOOL	IsRefMaker ()
	Tells whether it is a ReferenceMaker. More...
virtual BOOL	IsRealDependency (ReferenceTarget *rtarg)
	Returns whether this is a "real" (strong) dependency or not. More...
virtual BOOL	ShouldPersistWeakRef (RefTargetHandle rtarg)
	Specifies whether a weak reference is to be persisted on a partial load or save. More...
CoreExport	ReferenceMaker ()
	Constructor. More...
CoreExport void	DeleteMe ()
	Deletes an instance of this class. More...
virtual CoreExport int	NumRefs ()
	Returns the total number of references this ReferenceMaker can hold. More...
virtual CoreExport RefTargetHandle	GetReference (int i)
	Returns the 'i-th' reference. More...
Public Member Functions inherited from Animatable
virtual void	FreeCaches ()
virtual int	NumChildren ()
virtual Animatable *	ChildAnim (int i)
virtual CoreExport MSTR	NodeName ()
virtual void	EditTrack ()
virtual CoreExport BOOL	SubAnimSetKeyBufferPresent (int subNum)
	returns true if the sub-anim has a "Set Key" buffer present More...
virtual BOOL	SetKeyBufferPresent ()
	returns true if there is a "Set Key" buffer present More...
virtual CoreExport void	SubAnimCommitSetKeyBuffer (TimeValue t, int subNum)
	Commit any "Set Key" buffers on the given sub-anim. More...
virtual void	CommitSetKeyBuffer (TimeValue t)
	Commit any "Set Key" buffers. More...
virtual CoreExport void	SubAnimRevertSetKeyBuffer (int subNum)
	Revert any "Set Key" buffers on the given sub-anim. More...
virtual void	RevertSetKeyBuffer ()
	Revert any "Set Key" buffers. More...
virtual LRESULT CALLBACK	TrackViewWinProc (HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam)
	This function is obsolete. More...
virtual bool	IsParamBlockDesc2Used (ParamBlockDesc2 *desc)
	Returns true if the passed description is being used. More...
virtual bool	GetMacroRecorderName (bool used_as_rhs_value, MSTR &objectSpecifiedName)
	This method is called to access the object specified name to use for the Maxscript macrorecorder. More...
CoreExport	Animatable ()
	Constructor. More...
virtual CoreExport void	DeleteThis ()
	Deletes an instance of this class. More...
MSTR	ClassName () const
	Returns the name of the plugin class. More...
virtual CoreExport Class_ID	ClassID ()
	Retrieves a constant that uniquely identifies the plugin class. More...
virtual void	BeginEditParams (IObjParam *ip, ULONG flags, Animatable *prev=NULL)
virtual void	EndEditParams (IObjParam *ip, ULONG flags, Animatable *next=NULL)
virtual CoreExport void	ReleaseInterface (ULONG id, void *i)
virtual CoreExport int	SetProperty (ULONG id, void *data)
virtual CoreExport void *	GetProperty (ULONG id)
CoreExport void	AppendProperty (AnimProperty *prop)
	A function to directly add arbitrary properties to this object developers should ensure that the properties ID does not conflict with any Max-specific IDs. More...
CoreExport AnimProperty *	FindProperty (DWORD id)
	Find any property. More...
CoreExport void	AddAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid, DWORD len, void *data)
	Adds application/plugin specific (custom) data to an Animatable. More...
CoreExport AppDataChunk *	GetAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Retrieves the application/plugin specific (custom) data stored with an Animatable. More...
CoreExport BOOL	RemoveAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Deletes the application/plugin specific (custom) data stored with an Animatable. More...
CoreExport void	ClearAllAppData ()
	Deletes all application/plugin specific (custom) data stored with an Animatable. More...
virtual int	NumSubs ()
virtual Animatable *	SubAnim (int i)
virtual CoreExport MSTR	SubAnimName (int i)
virtual BOOL	CanDeleteSubAnim (int i)
virtual void	DeleteSubAnim (int i)
virtual DWORD	GetSubAnimCurveColor (int subNum)
virtual int	SubNumToRefNum (int subNum)
virtual BOOL	CanCopyAnim ()
CoreExport int	HasSubElements (int type=0)
virtual int	GetSubFCurveExtents (int subNum, ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	The values max and min should be initialized before calling this function. More...
virtual ParamDimension *	GetParamDimension (int i)
virtual BOOL	SelectSubAnim (int subNum)
virtual BOOL	BypassTreeView ()
virtual BOOL	BypassTrackBar ()
virtual BOOL	BypassPropertyLevel ()
virtual BOOL	InvisibleProperty ()
virtual int	NumKeys ()
virtual TimeValue	GetKeyTime (int index)
virtual int	GetKeyIndex (TimeValue t)
virtual BOOL	GetNextKeyTime (TimeValue t, DWORD flags, TimeValue &nt)
virtual void	CopyKeysFromTime (TimeValue src, TimeValue dst, DWORD flags)
virtual void	DeleteKeyAtTime (TimeValue t)
virtual BOOL	IsKeyAtTime (TimeValue t, DWORD flags)
virtual int	GetKeyTimes (Tab< TimeValue > &times, Interval range, DWORD flags)
virtual int	GetKeySelState (BitArray &sel, Interval range, DWORD flags)
CoreExport void	OpenTreeEntry (int type, DWORD tv)
CoreExport void	CloseTreeEntry (int type, DWORD tv)
CoreExport int	IsTreeEntryOpen (int type, DWORD tv)
CoreExport BOOL	GetSelInTrackView (DWORD tv)
CoreExport void	SetSelInTrackView (DWORD tv, BOOL sel)
CoreExport BOOL	InTrackViewSelSet (int which)
CoreExport void	SetTrackViewSelSet (int which, BOOL inOut)
virtual BOOL	AssignController (Animatable *control, int subAnim)
virtual BOOL	CanAssignController (int subAnim)
	Return true if we can reassign the subanim specified. More...
virtual BOOL	CanMakeUnique ()
CoreExport int	EnumAnimTree (AnimEnum *animEnum, Animatable *client, int subNum)
virtual int	RenderBegin (TimeValue t, ULONG flags=0)
virtual int	RenderEnd (TimeValue t)
virtual CoreExport Interval	GetTimeRange (DWORD flags)
virtual void	EditTimeRange (Interval range, DWORD flags)
virtual void	DeleteTime (Interval iv, DWORD flags)
virtual void	ReverseTime (Interval iv, DWORD flags)
virtual void	ScaleTime (Interval iv, float s)
virtual void	InsertTime (TimeValue ins, TimeValue amount)
virtual BOOL	SupportTimeOperations ()
virtual CoreExport void	MapKeys (TimeMap *map, DWORD flags)
virtual void	DeleteKeys (DWORD flags)
virtual void	DeleteKeyByIndex (int index)
virtual void	SelectKeys (TrackHitTab &sel, DWORD flags)
virtual void	SelectSubKeys (int subNum, TrackHitTab &sel, DWORD flags)
virtual void	SelectSubCurve (int subNum, BOOL sel)
virtual void	SelectKeyByIndex (int i, BOOL sel)
virtual BOOL	IsKeySelected (int i)
virtual void	FlagKey (TrackHitRecord hit)
virtual int	GetFlagKeyIndex ()
virtual int	NumSelKeys ()
virtual void	CloneSelectedKeys (BOOL offset=FALSE)
virtual void	AddNewKey (TimeValue t, DWORD flags)
virtual void	MoveKeys (ParamDimensionBase *dim, float delta, DWORD flags)
virtual void	ScaleKeyValues (ParamDimensionBase *dim, float origin, float scale, DWORD flags)
virtual void	SelectCurve (BOOL sel)
virtual BOOL	IsCurveSelected ()
	Returns TRUE if the function curve is selected; otherwise returns FALSE. More...
virtual BOOL	IsSubCurveSelected (int subNum)
	Returns the selected state of the sub-curve whose index is passed. More...
virtual int	GetSelKeyCoords (TimeValue &t, float &val, DWORD flags)
virtual void	SetSelKeyCoords (TimeValue t, float val, DWORD flags)
virtual int	SetSelKeyCoordsExpr (ParamDimension *dim, const MCHAR *timeExpr, const MCHAR *valExpr, DWORD flags)
virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, int dx, int dy, DWORD flags)
virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, float angle, float length, DWORD flags)
virtual CoreExport BOOL	IsAnimated ()
virtual BOOL	CanCopyTrack (Interval iv, DWORD flags)
virtual BOOL	CanPasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)
virtual TrackClipObject *	CopyTrack (Interval iv, DWORD flags)
virtual void	PasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)
virtual BOOL	CanCopySubTrack (int subNum, Interval iv, DWORD flags)
virtual BOOL	CanPasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)
virtual TrackClipObject *	CopySubTrack (int subNum, Interval iv, DWORD flags)
virtual void	PasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)
virtual int	GetTrackVSpace (int lineHeight)
virtual int	HitTestTrack (TrackHitTab &hits, Rect &rcHit, Rect &rcTrack, float zoom, int scroll, DWORD flags)
virtual int	PaintTrack (ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)
virtual int	PaintSubTrack (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)
virtual int	PaintFCurves (ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	HitTestFCurves (ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	PaintSubFCurves (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	HitTestSubFCurves (int subNum, ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual void	EditTrackParams (TimeValue t, ParamDimensionBase *dim, const MCHAR *pname, HWND hParent, IObjParam *ip, DWORD flags)
virtual int	TrackParamsType ()
virtual int	GetFCurveExtents (ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	This method is called to calculate the largest and smallest values of the anim. More...
CoreExport void	AddNoteTrack (NoteTrack *note)
CoreExport void	DeleteNoteTrack (NoteTrack *note, BOOL delNote=TRUE)
CoreExport BOOL	HasNoteTracks ()
CoreExport int	NumNoteTracks ()
CoreExport NoteTrack *	GetNoteTrack (int i)
virtual void	FreeAllBitmaps ()
virtual void	GetSystemNodes (INodeTab &nodes, SysNodeContext Context)
virtual BOOL	IsSubClassOf (Class_ID classID)
	returns true if the animatable has sub-classed off the given class More...
virtual CoreExport void	MouseCycleCompleted (TimeValue t)
virtual CoreExport void	MouseCycleStarted (TimeValue t)
virtual int	NumParamBlocks ()
virtual IParamBlock2 *	GetParamBlock (int i)
virtual IParamBlock2 *	GetParamBlockByID (short id)
CoreExport bool	SvSaveData (ISave *isave, USHORT id)
CoreExport bool	SvLoadData (ILoad *iLoad)
CoreExport DWORD	SvGetRefIndex ()
CoreExport void	SvSetRefIndex (DWORD i)
CoreExport bool	SvDeleteRefIndex ()
CoreExport SvGraphNodeReference	SvStdTraverseAnimGraph (IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
virtual CoreExport bool	SvCanInitiateLink (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvCanConcludeLink (IGraphObjectManager *gom, IGraphNode *gNode, IGraphNode *gNodeChild)
virtual CoreExport MSTR	SvGetName (IGraphObjectManager *gom, IGraphNode *gNode, bool isBeingEdited)
virtual CoreExport bool	SvCanSetName (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvSetName (IGraphObjectManager *gom, IGraphNode *gNode, const MSTR &name)
virtual CoreExport bool	SvCanRemoveThis (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvRemoveThis (IGraphObjectManager *gom, IGraphNode *gNode)
	Called when the user deletes this object in the schematic view... More...
virtual CoreExport bool	SvIsSelected (IGraphObjectManager *gom, IGraphNode *gNode)
	Returns true if the object is selected in its schematic view. More...
virtual CoreExport bool	SvIsHighlighted (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport COLORREF	SvHighlightColor (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport COLORREF	SvGetSwatchColor (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvIsInactive (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvLinkChild (IGraphObjectManager *gom, IGraphNode *gNodeThis, IGraphNode *gNodeChild)
virtual CoreExport bool	SvHandleDoubleClick (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MultiSelectCallback *	SvGetMultiSelectCallback (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvCanSelect (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvEditProperties (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetTip (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetRefTip (IGraphObjectManager *gom, IGraphNode *gNode, IGraphNode *gNodeMaker)
virtual CoreExport bool	SvCanDetach (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvDetach (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetRelTip (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns a string to be displayed in the tip window in the schematic view for a relationship from "gNodeMaker" to "gNodeTarget"... More...
virtual CoreExport bool	SvCanDetachRel (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns true if this object can respond to the SvDetachRel(...) method... More...
virtual CoreExport bool	SvDetachRel (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Detach this relationship. More...
virtual CoreExport bool	SvHandleRelDoubleClick (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Called when this relationship is double-clicked in the schematic view... More...
CoreExport ICustAttribContainer *	GetCustAttribContainer ()
	This method returns a pointer to the custom attributes container interface class. More...
CoreExport void	AllocCustAttribContainer ()
	This method allocates space for a custom attributes container. More...
CoreExport void	DeleteCustAttribContainer ()
	This method deletes space used by a custom attributes container. More...
void	SetAFlag (DWORD mask)
void	ClearAFlag (DWORD mask)
	Clears one or more bits in the Animatable flags. More...
bool	TestAFlag (DWORD mask) const
	Tests one or more bits in the Animatable flags. More...
void	SetAFlagEx (DWORD mask)
	Sets one or more bits in the Animatable extended flags. More...
void	ClearAFlagEx (DWORD mask)
	Clears one or more bits in the Animatable extended flags. More...
bool	TestAFlagEx (DWORD mask) const
	Tests one or more bits in the Animatable extended flags. More...
CoreExport bool	TestFlagBit (int index)
	Tests the specified flag bit. More...
CoreExport void	SetFlagBit (int index, bool newValue=true)
	Sets the specified flag bit. More...
CoreExport void	ClearFlagBit (int index)
	Clears the specified flag bit. More...
Public Member Functions inherited from InterfaceServer
virtual UtilExport	~InterfaceServer ()
	Destructor. More...

Additional Inherited Members
Static Public Member Functions inherited from Animatable
static CoreExport BOOL	IsDeleted (Animatable *anim)
	Debug method to determine whether an object has been deleted. More...
static CoreExport AnimHandle	GetHandleByAnim (Animatable *anim)
	Get the unique handle for an Animatable object. More...
static CoreExport Animatable *	GetAnimByHandle (AnimHandle handle)
	Get an Animatable object from its unique handle. More...
static CoreExport void	EnumerateAllAnimatables (EnumAnimList &enumProcObject)
	Enumerator to enumerate across all animatables. More...
static CoreExport bool	RegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	UnRegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	RegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	UnRegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport int	RequestFlagBit ()
	Requests an unique flag bit index. More...
static CoreExport void	ReleaseFlagBit (int index)
	Releases the flag bit index. More...
static CoreExport void	ClearFlagBitInAllAnimatables (int index)
	Clears the specified flag bit in all Animatables. More...
Static Public Member Functions inherited from MaxHeapOperators
static UtilExport void *	operator new (size_t size)
	Standard new operator used to allocate objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e)
	Standard new operator used to allocate objects if there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate objects that takes the type of memory, filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate arrays of objects. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void	operator delete (void *ptr)
	Standard delete operator used to deallocate an object If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an object If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an object that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, void *placement_ptr)
	Placement new operator. More...
static UtilExport void	operator delete (void *ptr, void *placement_ptr)
	Placement delete operator. More...
static UtilExport void *	aligned_malloc (size_t size, size_t alignment)
	Allocates memory on a specified alignment boundary. More...
static UtilExport void *	aligned_realloc (void *ptr, size_t size, size_t alignment)
	Reallocates memory on a specified alignment boundary. More...
static UtilExport void	aligned_free (void *ptr)
	Frees a block of memory that was allocated with aligned_malloc/aligned_realloc. More...
Public Attributes inherited from SpecialFX
MSTR	name
Static Public Attributes inherited from Animatable
static const AnimHandle	kInvalidAnimHandle = 0
Protected Member Functions inherited from ReferenceTarget
virtual CoreExport int	DoEnumDependentsImpl (DependentEnumProc *dep)
	Method to perform an enumeration on a ReferenceTarget. More...
virtual CoreExport	~ReferenceTarget ()=0
	Destructor. More...
Protected Member Functions inherited from ReferenceMaker
virtual CoreExport	~ReferenceMaker ()=0
	Destructor. More...
virtual CoreExport void	SetReference (int i, RefTargetHandle rtarg)
	Stores a ReferenceTarget as its 'i-th' reference`. More...
void	BlockEval ()
void	UnblockEval ()
int	Evaluating ()
CoreExport RefResult	StdNotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID partID, RefMessage message, BOOL propagate, NotifyDependentsOption notifyDependentsOption)
Protected Member Functions inherited from Animatable
virtual CoreExport	~Animatable ()=0
	Destructor. More...
Protected Member Functions inherited from Noncopyable
	Noncopyable ()
	~Noncopyable ()
Protected Attributes inherited from Animatable
DWORD	aflag
AnimPropertyList	aprops

Member Function Documentation

RefResult NotifyRefChanged ( const Interval &  changeInt, RefTargetHandle  hTarget, PartID &  partID, RefMessage  message, BOOL  propagate  )

inlinevirtual

Receives and responds to messages.

A plugin which makes references must implement a method to receive and respond to messages broadcast by its dependents. This is done by implementing NotifyRefChanged(). The plugin developer usually implements this method as a switch statement where each case is one of the messages the plugin needs to respond to. The Method StdNotifyRefChanged calls this, which can change the partID to new value. If it doesn't depend on the particular message& partID, it should return REF_DONTCARE.

• For developer that need to update a dialog box with data about an object you reference note the following related to this method: This method may be called many times. For instance, say you have a dialog box that displays data about an object you reference. This method will get called many time during the drag operations on that object. If you updated the display every time you'd wind up with a lot of 'flicker' in the dialog box. Rather than updating the dialog box each time, you should just invalidate the window in response to the NotifyRefChanged() call. Then, as the user drags the mouse your window will still receive paint messages. If the scene is complex the user may have to pause (but not let up on the mouse) to allow the paint message to go through since they have a low priority. This is the way many windows in 3ds Max work.

Parameters

changeInt	- This is the interval of time over which the message is active. Currently, all plug-ins will receive FOREVER for this interval, with the exception of REFMSG_FLAGDEPENDENTS notifications. In that case, changeInt.Start() is the timepoint to perform the dependency test.
hTarget	- This is the handle of the reference target the message was sent by. The reference maker uses this handle to know specifically which reference target sent the message.
partID	- This contains information specific to the message passed in. Some messages don't use the partID at all. See the section List of Reference Messages for more information about the meaning of the partID for some common messages.
message	- The message parameters passed into this method is the specific message which needs to be handled.
propagate	- If called through ReferenceMaker::NotifyDependents(), the value of 'propagate' passed to it. Used if calling NotifyDependents() from within NotifyRefChanged().

Returns

The return value from this method is of type RefResult. This is usually REF_SUCCEED indicating the message was processed. Sometimes, the return value may be REF_STOP. This return value is used to stop the message from being propagated to the dependents of the item.

Implements ReferenceMaker.

                             { return REF_SUCCEED; }

SClass_ID SuperClassID ( )

inlinevirtual

Retrieves a constant representing the type of the plugin.

Returns

A super class id that uniquely identifies the type (category) of the plugin. Note that several plugin classes can be of the same type, thus return the same super class id. Plugins are uniquely identified by their class ids.

See also

SClass_ID

Reimplemented from ReferenceTarget.

{ return SAMPLER_CLASS_ID; }

IOResult Save ( ISave *  isave )

inlinevirtual

Remarks

Implemented by the System.

This method saves the name of the sampler. This should be called at the start of a plug-in's save methods.

Parameters:

ISave *isave

An interface for saving data.

Reimplemented from ReferenceMaker.

{ return SpecialFX::Save(isave); }

IOResult Load ( ILoad *  iload )

inlinevirtual

Remarks

Implemented by the System.

This method loads the name of the sampler. This should be called at the start of a plug-in's load methods.

Parameters:

ILoad *iload

An interface for loading data.

Reimplemented from ReferenceMaker.

{ return SpecialFX::Load(iload); }

virtual void DoSamples ( ShadeOutput *  pOut, SamplingCallback *  cb, ShadeContext *  sc, MASK  mask = NULL  )

pure virtual

Remarks

This is the method where the Sampler plug-in does its sampling loop. Upon completion it returns the color and transparency back to 3ds Max in c and t.

A sampler samples a range of 0.0 to 1.0. For a pixel sampler this range gets mapped to a single pixel. The sampler doesn't need to be concerned with this however. It just works within the 0.0 to 1.0 space determining where to put the samples. Essentially, this method generates a set of points and calls SamplingCallback::SampleAtOffset() for each one. Then it sums up the results of the values returned from SampleAtOffset(), divides by the number of samples, and stores the results in c and t.

Parameters:

ShadeOutput* pOut

This is the output of the sampling.

SamplingCallback* cb

This is the callback provided by 3ds Max which the sampler uses to actually do the sampling.

ShadeContext* sc

The Shade Context which provides information about the pixel being sampled.

MASK mask=NULL

The 64 bit pixel mask. This mask coresponds to the 8x8 sub-pixel area grid. The actual geometry covers only some portion of these bits. This is essentially an 8x8 raster for the inside of the pixel where bits are set over the polygon being rendered and bits are off for areas not over the polygon. Developers typically only want to sample where the geometry is and thus when the bits are on. If not the results are very poor visually.

Note: Most polygons are quite small in a typically complex scene being rendered. In other words, most polygons that need to get sampled will only have a small number of these mask bits on since the polygons are very small relative to the pixel. For instance, edge on polygons may project down to only a few bits within the pixel. Consequently it is quite possible that there may be zero samples, i.e. no geometry in the mask. Developers need to check for this zero samples condition. If this is the case then a method of ShadeContext called SurfacePtScreen() is used. This method returns a point which is guaranteed to be on the fragment no matter how small it is. This point can then be used for at least a single sample.

Sample Code:

The following is a brief analysis of the DoSamples() method from the Uniform Sampler of 3ds Max. This sampler sub-divides the sample area into a grid and samples the pixel at the center point of each grid unit.

This code is from the file /MAXSDK/SAMPLES/RENDER/SAMPLERS/STDSAMPLERS.CPP.

The complete code is shown below and then a code fragment analysis follows:

void UniformSampler::DoSamples( ShadeOutput* pOut, SamplingCallback* cb, ShadeContext* sc, MASK mask ) {
    int sideSamples = GetSideSamples();
    DbgAssert( sideSamples > 0 );
    // we map 0...sideSz into 0..1
    float sideSzInv = 1.0f / float(sideSamples);
    float sampleScale = texSuperSampleOn ? sideSzInv : 1.0f;    
    Point2 samplePt;
    float nSamples = 0.0f;
    pOut->Reset();
    ShadeOutput sampOut( sc->NRenderElements() );

    // Sampling Loop
    for( int y = 0; y < sideSamples; ++y ) {
        samplePt.y = (float(y) + 0.5f) * sideSzInv;
        for( int x = 0; x < sideSamples; ++x ) {
            samplePt.x =  (float(x) + 0.5f) * sideSzInv;
            if ( sampleInMask( samplePt, mask, sc->globContext->fieldRender ) ) {
                // returns true for unclipped samples
                if (cb->SampleAtOffset( &sampOut, samplePt, sampleScale )) {
                    (*pOut) += sampOut;
                    nSamples += 1.0f;
                }
            }
        }
    } // end, sampling loop

    if ( nSamples == 0.0f ) {
        // gets center of frag in screen space
        samplePt = sc->SurfacePtScreen(); 
        cb->SampleAtOffset( pOut, samplePt, 1.0f );
    } 
    else {
        pOut->Scale( 1.0f / nSamples );
    }
}

The above code is broken into smaller fragments to look at below:

int sideSamples = GetSideSamples(); 

Here the sampler is just getting the number of sides in the sampling grid. This is computed based on the Quality spinner in the user interface. In this sampler this results in a number between 2 and 6 (developers can look at the UniformSampler::GetSideSamples() method to see this). Thus the resulting sampling grid is 2x2 or 3x3, up to 6x6. Then the number of samples is computed by multiplying the number of sides times itself.

int numSamples = sideSamples * sideSamples;

Next the side size inverse is computed to know how big the step size is. This is the amount to step along each time.

The sample scale is how large is the piece that's being sampled. For example, if the grid is 2x2 then each sample is scaled by 1/2

float sideSzInv = 1.0f / float(sideSamples);
float sampleScale = texSuperSampleOn ? sideSzInv : 1.0f;

Next the number of samples, and the color and transparency are initialized to zero:

float nSamples = 0.0f;
pOut->Reset();
ShadeOutput sampOut( sc->NRenderElements() );

Then the sampling loop begins. Here the positions of individual sampling points are computed. Each point is then checked to see if it corresponds to a point in the mask (is over a polygon). (The sampleInMask function is defined in /MAXSDK/SAMPLES/RENDER/SAMPLERS/SAMPLERUTIL.CPP). If it is a point that's over a polygon then SampleAtOffset() is called. What SampleAtOffset() does is turn the passed 2D sample into a 3D sample and fills out a ShadeOutput with a color and transparency. These returned values are summed up over the sampling loop ((*pOut) += sampOut;).

for( int y = 0; y < sideSamples; ++y ) {
    samplePt.y = (float(y) + 0.5f) * sideSzInv;
    for( int x = 0; x < sideSamples; ++x ) {
        samplePt.x =  (float(x) + 0.5f) * sideSzInv;
        if ( sampleInMask( samplePt, mask, sc->globContext->fieldRender ) ) {
            // returns true for unclipped samples
            if (cb->SampleAtOffset( &sampOut, samplePt, sampleScale )) {
                (*pOut) += sampOut;
                nSamples += 1.0f;
            }
        }
    }
}

At the end of the sampling loop a check is done to see if there were zero samples. This is the case if the geometry is very small relative to the pixel. There are two approaches that one might take when there are zero samples. One is to simply return black. A strict 'jitter-type' sampler might do this since, in fact, no samples were hit. This will result in artifacts to the image however. A better approach is to use the ShadeContext method SurfacePtScreen() to return a point which is guaranteed to be at the center of the fragment. Then this point is passed to SampleAtOffset() so a single sample which is on the fragment is used.

If a single sample point was used, DoSamples() is finished. The reults are in pOut as returned from SampleAtOffset().

If a number of samples was taken, the shade info is scaled by the inverse of the number of samples (nSamples) to get the final colors.

if ( nSamples == 0.0f ) {
    // gets center of frag in screen space
    samplePt = sc->SurfacePtScreen(); 
    cb->SampleAtOffset( pOut, samplePt, 1.0f );
} 
else {
    pOut->Scale( 1.0f / nSamples );
}

virtual int GetNSamples ( )

pure virtual

Remarks

This methods returns the integer number of samples given the current quality setting. If doing adaptive sampling (where the number of samples may vary) return the maximum number of samples possible.

virtual void SetQuality ( float  value )

pure virtual

Remarks

Sets the sampling quality. This is the one default parameter.

Parameters:

float value

Quality is nominal with a range of 0.0 to 1.0.

virtual float GetQuality ( )

pure virtual

Remarks

Returns the sampling quality in the range of 0.0 to 1.0. Quality means how many samples are taken to compute the shade in a pixel. Higher quality is of course achieved by more samples. Quality 0.0 means "minimal", Quality 1.0 means "best", and Quality 0.5 means "good, the default ". Some samplers do not have adjustable quality (like 3ds Max 2.5 Star), in which case the quality spinner is disabled and this method is ignored.

virtual int SupportsQualityLevels ( )

pure virtual

Remarks

This method returns 0 on "unchangeable", otherwise the number of quality levels.

virtual void SetEnable ( BOOL  samplingOn )

pure virtual

Remarks

Sets the Enable Sampler state to on or off.

Parameters:

BOOL samplingOn

TRUE for on; FALSE for off.

virtual BOOL GetEnable ( )

pure virtual

Remarks

Returns TRUE if sampling is enabled; otherwise FALSE.

virtual const MCHAR* GetDefaultComment ( )

pure virtual

Remarks

Returns a comment string for the Sampler which appears in the Materials Editor user inteface.

virtual ULONG SupportsStdParams ( )

inlinevirtual

Remarks

This method determines which of the various optional parameters are displayed. Zero or more of the following values (which may be added together):

IS_ADAPTIVE – Samples is adaptive in some way.

ADAPTIVE_CHECK_BOX – Enable the Adaptive check box.

ADAPTIVE_THRESHOLD – Enable the adaptive Threshold spinner.

SUPER_SAMPLE_TEX_CHECK_BOX – Enable the texture Super Sampling check box.

ADVANCED_DLG_BUTTON – Enable the Advanced button. This allows an additional popup dialog to be presented to the user. See the method ExecuteParamDialog().

OPTIONAL_PARAM_0 – Enable optional spinner 0. See the methods GetOptionalParamName(), GetOptionalParamMax(), etc.

OPTIONAL_PARAM_1 – Enable optional spinner 1.

The following option is simply a set of these:

R3_ADAPTIVE = (IS_ADAPTIVE+ADAPTIVE_CHECK_BOX+ADAPTIVE_THRESHOLD)

Default Implementation:

{ return 0; }

{ return 0; }

virtual void SetTextureSuperSampleOn ( BOOL  on )

inlinevirtual

Remarks

This method is called on the Sampler to reflect the change in the 'Supersamp. Tex.' checkbox state. This determines whether to cut down the texture sample size of each sample, or whether to always use 1 pixel texture sample size.

Parameters:

BOOL on

TRUE for on; FALSE for off.

Default Implementation:

{}

{}

virtual BOOL GetTextureSuperSampleOn ( )

inlinevirtual

Remarks

Returns TRUE if Super Sampling is on; otherwise FALSE. See SetTextureSuperSampleOn() above.

Default Implementation:

{ return FALSE; }

{ return FALSE; }

virtual void SetAdaptiveOn ( BOOL  on )

inlinevirtual

Remarks

This method is called on the Sampler to reflect the change in the 'Adaptive' checkbox state.

Parameters:

BOOL on

TRUE for on; FALSE for off.

Default Implementation:

{}

{}

virtual BOOL IsAdaptiveOn ( )

inlinevirtual

Remarks

Returns TRUE if Adaptive is on (cheched in the user interface); otherwise FALSE.

Default Implementation:

{ return FALSE; }

{ return FALSE; }

virtual void SetAdaptiveThreshold ( float  value )

inlinevirtual

Remarks

This method is called on the Sampler to reflect the change in the 'Threshold' spinner.

Parameters:

float value

The value to set. Range 0-1.

Default Implementation:

{}

{}

virtual float GetAdaptiveThreshold ( )

inlinevirtual

Remarks

Returns the adaptive threshold setting.

Default Implementation:

{ return 0.0f; }

{ return 0.0f; }

virtual long GetNOptionalParams ( )

inlinevirtual

Remarks

Samplers plug-ins support two optional parameter which may be used by the plug-in for its own needs. This methods returns the number of parameters it supports. Note that the max value is 2.

Default Implementation:

{ return 0; }

{ return 0; }

virtual MCHAR* GetOptionalParamName ( long  nParam )

inlinevirtual

Remarks

Returns the name of the specified parameter.

Parameters:

long nParam

The zero based index of the optional parameter: 0 for the first one, 1 for the second.

Default Implementation:

{ return _M(""); }

{ return _M(""); }

virtual float GetOptionalParamMax ( long  nParam )

inlinevirtual

Remarks

Returns the maximum value of the specified optional parameter.

Parameters:

long nParam

The zero based index of the optional parameter: 0 for the first one, 1 for the second.

Default Implementation:

{ return 1.0f; }

{ return 1.0f; }

virtual float GetOptionalParam ( long  nParam )

inlinevirtual

Remarks

Returns the value of the specified optional parameter.

Parameters:

long nParam

The zero based index of the optional parameter: 0 for the first one, 1 for the second.

Default Implementation:

{ return 0.0f; }

{ return 0.0f; };

virtual void SetOptionalParam ( long  nParam, float  val  )

inlinevirtual

Remarks

Sets the value of the specified optional parameter.

Parameters:

long nParam

The zero based index of the optional parameter: 0 for the first one, 1 for the second.

float val

The value to set.

Default Implementation:

{}

{};

virtual void ExecuteParamDialog ( HWND  hWndParent, StdMat2 *  mtl  )

inlinevirtual

Remarks

This method is called to put up a modal dialog which allows editing of the extended parameters. The rest of the operation of 3ds Max should be disalbed by this modal dialog (which is why you should use GetMAXHWnd()). This method is called when the Advanced button is pressed (which is enabled by using the ADVANCED_DLG_BUTTON flag returned from SupportsStdParams().

Parameters:

HWND hWndParent

The parent window handle. Use Interface::GetMAXHWnd().

StdMat2* mtl

Points to the owning Standard material.

Default Implementation:

{}

{}

virtual BOOL SetDlgThing ( EffectParamDlg *  dlg )

inlinevirtual

Remarks

You should implement this method if you are using the ParamMap2 AUTO_UI system and the sampler has secondary dialogs that have something other than the incoming effect as their 'thing'. Called once for each secondary dialog for you to install the correct thing. Return TRUE if you process the dialog, FALSE otherwise, in which case the incoming effect will be set into the dialog.

Note: Developers needing more information on this method can see the remarks for MtlBase::CreateParamDlg() which describes a similar example of this method in use (in that case it's for use by a texture map plug-in).

Parameters:

EffectParamDlg* dlg

Points to the ParamDlg.

Default Implementation:

{ return FALSE; }

Reimplemented from SpecialFX.

{ return FALSE; }