Open the Cables dialog using either of the following methods:
This option allows for attributing cable properties to structure elements. It is available from:
The Cables dialog lets you assign cable properties to structure elements. It has:
The active list provides information about the label and the type of the defined cable.
At the top of the dialog:
Similar to the dialog for defining sections or supports, the process of assigning cable properties to structure elements is divided into 2 steps:
If the active cable list is empty or a new cable type is to be added to the active list, click New cable :
You can also open the dialog for a new cable definition by double-clicking on the element from the active cable list. The New Cable dialog opens on the tab respectively to the cable type and all fields are filled according to the cable type selected. After changing the required parameters, the cable is added (updated) to the active list by clicking ADD or pressing <ENTER>. If you do not change the label, an appropriate warning displays (as in the case of a new cable definition). This option in the dialog lets you change cable properties.
To delete a cable from the structure:
You cannot modify this type of cable; it is assigned the same way as the cable properties are to a structure element.
The symbol of the cable displays after you add it.
See also: