To Specify the Material of a Slab/Roof Slab

Use this procedure to select a different material for components of an individual slab or roof slab.

Note: If a material assignment does not determine the display properties of the component, change the properties of the display component.

1. Select the slab or roof slab you want to change, right-click, and click Edit Object Display.
2. To verify that the material assignment determines the display properties of the component, click the Display Properties tab, select the display representation on which to display the changes, and click .
3. Click the Layer/Color/Linetype tab, verify that By Material is selected for the component, and click OK.
4. Click the Materials tab.
5. Select the component you want to change, and select a different material definition.

   You can select any material definition in the current drawing, or click to create a new material definition and assign it to a component.

   Note: When you edit a material definition from this dialog box, any changes you make will apply to all objects that are assigned the material.
6. Click OK.