To Remove Slab/Roof Slab Interference Conditions

Use this procedure to remove an interference condition from a slab or roof slab. Note that only the interference condition is removed; the object from which the interference condition was created remains in the drawing.

  1. Select the slab or roof slab, and
    if the object selected is… then…
    a slab click Slab tabModify panelInterference Condition drop-downRemove.
    a roof slab click Roof Slab tabModify panelInterference Condition drop-downRemove.
  2. Select the objects to remove as interference conditions, and press Enter.
    Note: You can also remove interference conditions through the Interference Conditions worksheet.