About Point Information Commands

The following table lists the point information-related Autodesk Civil 3D survey commands and briefly describes their functionality.

Note: These commands must be entered in the Survey Command Window. For more information, see Survey Command Window.

Command	Description
A [point 1] [point 2] [point 3]	Lists the horizontal angle between points
AZ [point 1] [point 2]	Lists the azimuth between two points
B [point 1] [point 2]	Lists a bearing between two points
D [point 1] [point 2]	Determines the distance between two points
DISP PTS (point 1) (point 2)	Displays point information
GRADE [point 1] [point 2]	Lists the grade between two points
INV PTS [point 1] [point 2]	Lists the direction and distance between points
INVERSE RADIAL [backsight] [station]	Lists the angle and distance from a setup in a radial direction from the backsight point
SLOPE [point 1] [point 2]	Lists the slope angle between two points
SD [point 1] [point 2]	Lists the slope distance between two points
VD [point 1] [point 2]	List the elevation distance between two points