P Commands

Topics in this section

PIDANNOTATE
Places an annotation in a drawing.
PIDCONVERT
Adds data to an AutoCAD object to add it to reports.
PIDEDITBLOCK
Edits a P&ID component so that you can create a new instance of that object.
PIDTAG
Defines tagging data for a P&ID component or line.
PLANTATTACH
Attaches external references to Collaboration project drawings.
PLANTAUDIT
Audits and repairs project data and drawing synchronization errors.
PLANTAUDITDATABASE
Evaluates the integrity of a project and corrects errors in the collaboration project.
PLANTCHECKIN
Checks in a collaboration drawing.
PLANTCHECKOUT
Checks out a drawing from the collaboration hub.
PLANTCOLLABORATIONOPTIONS
Displays the Collaboration Options dialog box.
PLANTCOMPASS
Changes compass settings.
PLANTCONNECTJOINT
Connects two adjacent components with a new joint.
PLANTCONVERTLINETOPIPE
Converts AutoCAD line objects to Piping.
PLANTCUSTOMPARTS
Creates custom components and instrumentation.
PLANTDISCONNECTJOINT
Disconnects two joined components by removing the fasteners.
PLANTDWGCHECKER
Runs a consistency check between the drawing text and the corresponding property values in the database.
PLANTDYNAMICTOOLPALETTE
Loads the dynamic pipe spec tool palette from the current spec.
PLANTEDITAUTODESKCONNECTIONPOINT
Modifies Autodesk Connection Point (ACP) properties.
PLANTEDITBEND
Creates a pipe bend.
PLANTENDCODES
Creates or modifies endcodes.
PLANTEQUIPMENTATTACH
Attaches an AutoCAD object to an equipment model.
PLANTEQUIPMENTCONVERT
Converts a 3D DWG model to an AutoCAD Plant 3D toolset equipment model.
PLANTEQUIPMENTCREATE
Creates a new equipment model.
PLANTEQUIPMENTDETACH
Detaches all previously attached objects from an equipment model.
PLANTEQUIPMENTMODIFY
Modifies an existing equipment model.
PLANTFITTINGADD
Places piping components.
PLANTFITTINGMOVE
Moves and copies piping components. Dynamic input is supported.
PLANTHIDE
Hides the selected objects.
PLANTINSERTAUTODESKCONNECTIONPOINT
Creates an Autodesk Connection Point (ACP) at an open port.
PLANTINVENTOREQUIPMENTCONVERT
Imports an Inventor AEC export file (*.adsk) as an AutoCAD Plant 3D toolset equipment model.
PLANTISOADDINFO
Creates an Iso information item.
PLANTISOADDMSG
Creates a message on the drawing. Sets the message text, enclosure, and dimensioning.
PLANTISOLATE
Hides everything except the selected Plant 3D objects.
PLANTISOTBATTRIBUTESETUP
Setup title block attributes.
PLANTISOTBCLOSE
Closes the Iso Table Editor.
PLANTISOTBDRAWAREA
Designates draw and no-draw areas in an Iso drawing.
PLANTISOTBNORTHARROW
Adds a North arrow to an Iso title block.
PLANTISOTBPLACETABLE
Places one or more tables in an Iso drawing template.
PLANTISOTBTABLESETUP
Configures tables (BOM, Cut piece list, weld list, spool list) that display on an isometric drawing title block.
PLANTISOTHEMESSETUP
Sets Isometric themes.
PLANTMODIFYSHAREDCONTENTFOLDER
Sets the catalog file folder and migrates from earlier versions to AutoCAD Plant 3D toolset if necessary.
PLANTORTHOADDJOG
Cuts out a specified portion of the OrthoCube to create an irregular-shaped view.
PLANTORTHOADJACENT
Creates an orthographic view adjacent to an existing view.
PLANTORTHOANNOTATE
Annotates components in ortho drawings.
PLANTORTHOANNOTATEBOM
Creates an Ortho BOM mark number annotation by selecting a row in the BOM table.
PLANTORTHOCREATE
Creates a new orthographic view.
PLANTORTHODELETE
Deletes an orthographic view.
PLANTORTHODWGTABLESETUP
Displays the Ortho Table Setup dialog box.
PLANTORTHOEDIT
Edits an orthographic view.
PLANTORTHOLOCATE
Quickly locates an ortho component in the originating 3D model.
PLANTORTHOPAPERCHECK
Displays an overlaid preview of the paper size in relation to the selected ortho view scale.
PLANTORTHOPIPEGAP
Creates, modifies, or removes pipe gaps to reveal or hide details behind the pipe.
PLANTORTHOPIPEINSULATION
Creates insulation symbol on ortho drawings.
PLANTORTHOPLACEBOM
Creates an ortho BOM table.
PLANTORTHOPLACEBOMTEMPLATE
Places an Ortho BOM template in Title Block Setup.
PLANTORTHOSHOWOPENPIPESYMBOL
Cycles through the open pipe symbol modes in ortho drawings: no cut-pipe symbols shown, only symbols on pipes or components cut by the OrthoCube shown (default), symbols on open-ended pipes as well as pipes or components cut by the OrthoCube shown.
PLANTORTHOSINGLELINEPIPING
Displays the selected piping as a single line in ortho drawings.
PLANTORTHOTEMPLATESETTINGS
Configures ortho layer mappings and specifies default styles.
PLANTORTHOTEMPLATETABLESETUP
Displays the Ortho Table Setup dialog box.
PLANTORTHOUPDATE
Updates the content of an existing orthographic view.
PLANTORTHOUPDATEANNOTATION
Updates all the annotations in an ortho drawing.
PLANTORTHOUPDATEBOM
Updates Ortho BOM tables.
PLANTORTHOVALIDATEVIEW
Checks the model to see if changes have been made since the drawing was last updated.
PLANTPARTCONVERT
Converts an AutoCAD block to a piping component by adding ports.
PLANTPCFEXPORT
Exports a piping component file.
PLANTPCFTOISO
Creates an Iso from a PCF file.
PLANTPIDLINELIST
Places a 3D equivalent of a P&ID object in a Plant 3D model.
PLANTPIDSIZEMAPPING
Edits the size values from the default file that maps P&ID and Plant 3D objects and properties.
PLANTPIPEADD
Routes piping and inserts components.
PLANTPIPESLOPE
Edits the slope between two selected ports on a pipe run.
PLANTPIPESUPPORTADD
Adds pipe supports.
PLANTPIPESUPPORTATTACH
Attaches AutoCAD objects to a pipe support.
PLANTPIPESUPPORTCONVERT
Converts AutoCAD objects to a pipe support.
PLANTPIPESUPPORTDETACH
Detaches all AutoCAD objects from a pipe support.
PLANTPIPESUPPORTMOVE
Moves and copies pipe supports.
PLANTPROJECTCOLLABORATION
PLANTPROJECTCOMPARE
Displays the Project Compare dialog box.
PLANTPRODUCTIONISO
Creates a production iso.
PLANTQUICKISO
Creates a quick iso.
PLANTRECONCILEPROJECT
Updates synchronization data in the plant master database.
PLANTREGISTERCUSTOMSCRIPTS
Registers a parametric model
PLANTREMOVEORPHANFASTENERS
Removes fasteners that are no longer part of a joint.
PLANTROUTEFROMAUTODESKCONNECTIONPOINT
Route piping from an Autodesk Connection Point object.
PLANTSHOWALL
Displays all Plant 3D objects in a drawing.
PLANTSIZEDISPLAYMODE
Displays component size only in project units or in both Imperial and metric units when the project and component units differ.
PLANTSPECUPDATECHECK
Checks for changes made to spec files that are in use in a drawing.
PLANTSPECVIEWER
Displays the current pipe spec.
PLANTSTEELCUT
Cuts structural members with respect to member boundaries.
PLANTSTEELEDGECUT
Cuts multiple structural members with respect to other member edges.
PLANTSTEELEDIT
Edits structural object properties.
PLANTSTEELEXPLODE
Explodes complex structural objects into individual elements.
PLANTSTEELEXTEND
Lengthens or shortens structural members to meet a plane.
PLANTSTEELFOOTING
Creates a footing.
PLANTSTEELGRID
Creates a structural grid.
PLANTSTEELLADDER
Creates a ladder.
PLANTSTEELLENGTHEN
Changes the length of structural members.
PLANTSTEELMEMBER
Creates a structural member.
PLANTSTEELMITER
Fits two structural members together in a miter joint.
PLANTSTEELPLATE
Creates a plate or grating.
PLANTSTEELRAILING
Creates a railing.
PLANTSTEELRESTORE
Resets structural members to the original states.
PLANTSTEELSETREP
Changes the model representation of structural objects.
PLANTSTEELSTAIR
Creates a stair.
PLANTSTEELTRIM
Shortens or lengthens structural members to meet a plane.
PLANTSUPPORTSONSUPPORTS
Connects and disconnects a pipe support to another support.
PLANTTAG
Tags a Plant 3D object.
PLANTUNDOCHECKOUT
Undoes the check out of a collaboration project drawing.
PLANTWELDADD
Adds a weld to pipe.

Parent topic: Commands