IParticleGroup.h

Enumerations
enum	{ invalidateCurrent =0 , invalidateViewport =1 , invalidateRender =2 , invalidateBoth =3 }

Functions
virtual INode *	GetParticleSystem () const =0
	get a primary particle system for the particle group
virtual void	SetParticleSystem (INode *pSystem)=0
	set a reference on a primary particle system
virtual INode *	GetActionList () const =0
	get a primary action list for the particle group
virtual void	SetActionList (INode *aList)=0
	set a reference on a primary action list
virtual int	GetActiveStatus () const =0
	get activity status of the group; the group can be put into "idle" mode if returns zero then the group is in the "idle" mode
virtual void	SetActiveStatus (int status)=0
	set activity status of the group
virtual int	UpdateActiveStatus ()=0
	updates activity status of the group taking into consideration schematics of the primary particle system and primary action list if the group is "fertile" but the primary particle system does not have direct association with the primary action list then the group is put into "idle" mode returns activity status to be set
virtual void	UpdateActionSet ()=0
	updates set of actions in the particle group the set is composed from global actions from the primary particle system and local actions from the associated primary actionList
virtual Mtl *	GetMaterial () const =0
	get material from the list of actions the last action that has a material is the one
virtual DWORD	GetWireColor () const =0
	get wire color from the list of actions the last action that has a PFViewport interface is the one
virtual IObject *	GetParticleContainer () const =0
	get a particle container for the particle group
virtual const Interval &	GetValidityInterval () const =0
	get validity interval for the particle group
virtual void	SetValidityInterval (const Interval &validInterval)=0
	set validity interval for the particle group
virtual void	Init (TimeValue time)=0
	set initial state for the particle group with time
virtual TimeValue	GetFertilityTime ()=0
	returns fertility time of the particle group: the first time moment when the particle group can generate particles from scratch if the group is not active then it is not "fertile"
virtual bool	Update (TimeValue t)=0
	advance particles in the group to the given time
virtual bool	PreUpdate (TimeValue t)=0
	the following method allows to apply the actions Proceed method as a pre procedure before any modification to the particle container has been made.
virtual bool	PostUpdate (TimeValue t)=0
	the following method allows to apply the actions Proceed method as a post procedure when the amount of particles in all particle groups has been established and there won't be any particle transfers from one particle group to another
virtual bool	TransferSurplusContainer (IObject *&pCont, INode *&actionListTo)=0
	returns a ptr at particleContainer to be transferred to another Event the particle group looses this ptr completely if the group doesn't have surplus containers then it returns false
virtual bool	AppendSurplusContainer (IObject *pCont)=0
	appends the given container to the container of the group but first the given container is advanced in time to be in sync with the container of the group
virtual bool	IsSync (TimeValue &time)=0
	returns true if content of the particle group is synchronized in time if group is in "sync" then it doesn't have surplus containers if false then the method returns the closest sync time for the particle group it could be a time of the closest cache moment.
virtual bool	InstantUpdate (TimeValue t)=0
	set particles in the group to the given time it should not involve any history dependent operations if the method is called it implies that the group is able to make an instant jump to the given time thus there is a cache for that time
virtual bool	SetFinalUpdateTime (TimeValue t)=0
	inform the group what would be a final time for the series of update calls
virtual void	SetHandle (ULONG handle)=0
	Informs the particle group about the handle of the particle group node the handle is later used to uniquely identify particle container for cache purposes.
virtual void	InvalidateContainer (int type=invalidateCurrent)=0
	clear particle content in the particle group then enum should be in sync with IPFCache
virtual void	InvalidateCaches (int type=invalidateCurrent)=0
	clear caches in the particle group
virtual bool	HasDelayedInvalidation () const =0
	in normal circumstances when a particle group receives a change notification message from the encapsulated operator/test the particle group should invalidate itself.
virtual bool	DoDelayedInvalidation ()=0
	check if the group has a delayed invalidation
virtual void	InvalidateActions ()=0
	Particle Group stores pointers at IPFAction interfaces for efficiency.
FPInterfaceDesc *	GetDesc ()
	perform invalidation that was delayed

Detailed Description

Enumeration Type Documentation

anonymous enum

anonymous enum

Enumerator
invalidateCurrent
invalidateViewport
invalidateRender
invalidateBoth

{ invalidateCurrent=0, invalidateViewport=1, invalidateRender=2, invalidateBoth=3};

Function Documentation

GetParticleSystem()

virtual INode * GetParticleSystem ( ) const

pure virtual

get a primary particle system for the particle group

SetParticleSystem()

virtual void SetParticleSystem ( INode * pSystem )

pure virtual

set a reference on a primary particle system

GetActionList()

virtual INode * GetActionList ( ) const

pure virtual

get a primary action list for the particle group

SetActionList()

virtual void SetActionList ( INode * aList )

pure virtual

set a reference on a primary action list

GetActiveStatus()

virtual int GetActiveStatus ( ) const

pure virtual

get activity status of the group; the group can be put into "idle" mode if returns zero then the group is in the "idle" mode

SetActiveStatus()

virtual void SetActiveStatus ( int status )

pure virtual

set activity status of the group

UpdateActiveStatus()

virtual int UpdateActiveStatus ( )

pure virtual

updates activity status of the group taking into consideration schematics of the primary particle system and primary action list if the group is "fertile" but the primary particle system does not have direct association with the primary action list then the group is put into "idle" mode returns activity status to be set

UpdateActionSet()

virtual void UpdateActionSet ( )

pure virtual

updates set of actions in the particle group the set is composed from global actions from the primary particle system and local actions from the associated primary actionList

GetMaterial()

virtual Mtl * GetMaterial ( ) const

pure virtual

get material from the list of actions the last action that has a material is the one

GetWireColor()

virtual DWORD GetWireColor ( ) const

pure virtual

get wire color from the list of actions the last action that has a PFViewport interface is the one

GetParticleContainer()

virtual IObject * GetParticleContainer ( ) const

pure virtual

get a particle container for the particle group

GetValidityInterval()

virtual const Interval & GetValidityInterval ( ) const

pure virtual

get validity interval for the particle group

SetValidityInterval()

virtual void SetValidityInterval ( const Interval & validInterval )

pure virtual

set validity interval for the particle group

Init()

virtual void Init ( TimeValue time )

pure virtual

set initial state for the particle group with time

GetFertilityTime()

virtual TimeValue GetFertilityTime ( )

pure virtual

returns fertility time of the particle group: the first time moment when the particle group can generate particles from scratch if the group is not active then it is not "fertile"

Update()

virtual bool Update ( TimeValue t )

pure virtual

advance particles in the group to the given time

PreUpdate()

virtual bool PreUpdate ( TimeValue t )

pure virtual

the following method allows to apply the actions Proceed method as a pre procedure before any modification to the particle container has been made.

It is not recommended to change the particle container in this method. It is mostly to inquiring particle properties.

PostUpdate()

virtual bool PostUpdate ( TimeValue t )

pure virtual

the following method allows to apply the actions Proceed method as a post procedure when the amount of particles in all particle groups has been established and there won't be any particle transfers from one particle group to another

TransferSurplusContainer()

virtual bool TransferSurplusContainer ( IObject *& pCont, INode *& actionListTo )

pure virtual

returns a ptr at particleContainer to be transferred to another Event the particle group looses this ptr completely if the group doesn't have surplus containers then it returns false

AppendSurplusContainer()

virtual bool AppendSurplusContainer ( IObject * pCont )

pure virtual

appends the given container to the container of the group but first the given container is advanced in time to be in sync with the container of the group

IsSync()

virtual bool IsSync ( TimeValue & time )

pure virtual

returns true if content of the particle group is synchronized in time if group is in "sync" then it doesn't have surplus containers if false then the method returns the closest sync time for the particle group it could be a time of the closest cache moment.

The closest time is always smaller (earlier) then the request time.

InstantUpdate()

virtual bool InstantUpdate ( TimeValue t )

pure virtual

set particles in the group to the given time it should not involve any history dependent operations if the method is called it implies that the group is able to make an instant jump to the given time thus there is a cache for that time

SetFinalUpdateTime()

virtual bool SetFinalUpdateTime ( TimeValue t )

pure virtual

inform the group what would be a final time for the series of update calls

SetHandle()

virtual void SetHandle ( ULONG handle )

pure virtual

Informs the particle group about the handle of the particle group node the handle is later used to uniquely identify particle container for cache purposes.

InvalidateContainer()

virtual void InvalidateContainer ( int type = invalidateCurrent )

pure virtual

clear particle content in the particle group then enum should be in sync with IPFCache

InvalidateCaches()

virtual void InvalidateCaches ( int type = invalidateCurrent )

pure virtual

clear caches in the particle group

HasDelayedInvalidation()

virtual bool HasDelayedInvalidation ( ) const

pure virtual

in normal circumstances when a particle group receives a change notification message from the encapsulated operator/test the particle group should invalidate itself.

However if the particle system is in the stage of proceeding then it is not possible to invalidate particle group right away. The particle group can know the status of the particle system by using global IsPFProceeding method (IPViewManager.h). Then if the system has the proceed status then the particle group should delay the invalidation.

DoDelayedInvalidation()

virtual bool DoDelayedInvalidation ( )

pure virtual

check if the group has a delayed invalidation

InvalidateActions()

virtual void InvalidateActions ( )

pure virtual

Particle Group stores pointers at IPFAction interfaces for efficiency.

Those pointers are maintained automatically. In some circumstances (during Replace) it is necessary to flush those interfaces because they may become invalid.

GetDesc()

FPInterfaceDesc * GetDesc ( )

inlinevirtual

perform invalidation that was delayed

Implements FPInterface.

{ return GetDescByID(PARTICLEGROUP_INTERFACE); }