Arnold for 3ds Max 5.9.5.0 What's New

3ds Max 2027.3 includes Arnold for 3ds Max (MAXtoA) 5.9.5.0. This page lists everything that has changed since MAXtoA 5.9.3.0, which was included with 3ds Max 2027.2. New features include the new Arnold Viewport that renders Arnold inside the 3ds Max viewport, pause and resume for production renders, the Shader imager with imager presets and example OSL filters, custom AOV creation in the AOV Manager, new BSDF and Rim Light shaders for stylized rendering, VDB files rendered as implicit surfaces or points, a new Arnold Implicit object, a Frame Time Limit for batch renders, better denoising, faster GPU rendering and scene updates, and more.

See the MAXtoA release notes for the changes in each MAXtoA version.

Flow Render Tech Preview

MAXtoA 5.9.5.0 includes a Tech Preview of Flow Render, an Arnold cloud-rendering solution. We are providing 2400 minutes (per user, per month) of rendering time to Arnold users for testing and evaluating the service. Since MAXtoA 5.9.3.0, Flow Render has added turntable rendering, texture baking, multiple frames per render task, custom OCIO configs, and a per-frame render time limit. Please report any feedback or issues in the Arnold forums.

See the Flow Render Tech Preview documentation for more information.

Enhancements

Arnold Viewport

The new Arnold Viewport renders Arnold interactively right inside the active 3ds Max viewport. It updates quickly while you navigate and edit, using NVIDIA Deep Learning Super Sampling (DLSS) on the GPU, and gizmos, grids, and wireframe overlays stay drawn on top. It uses your production Render Setup settings, so what you see matches what you render, but the framing follows the viewport rather than the render resolution. ActiveShade is unchanged and still available. (MAXTOA-2238, MAXTOA-2270, MAXTOA-2316, MAXTOA-2327, MAXTOA-2329, MAXTOA-2340, ARNOLD-18151)

While Arnold is the production renderer, every viewport shows an Arnold Viewport label next to the 3ds Max viewport labels. Turn on its checkbox to start Arnold Viewport in that viewport, and turn it off to stop it. Click the rest of the label to open the settings flyout. A [GPU] or [CPU] tag on the label shows the render device. By default, Arnold Viewport renders at half resolution so that it stays responsive while you navigate. Arnold Viewport renders in one viewport at a time, and you can't run it at the same time as the Arnold RenderView.

The same fast mode is available in the Arnold RenderView as Accelerated Rendering. Imagers, including the new Shader imager, are not applied in Arnold Viewport or Accelerated Rendering.

Responsive navigation

When you move the camera, Arnold Viewport gets to an interactive frame rate quickly and holds it, then returns to full quality once the camera settles. To keep up, it can drop several quality settings in one step and render at a reduced resolution. Max Upscale in the settings flyout sets how far the resolution may drop, on top of DLSS, while the camera moves. The default is 6, and 1 turns it off. If that is still too slow, Arnold Viewport can switch to an unlit preview that shades each surface by its facing ratio. Moving the Quality ↔ Speed slider all the way to Quality turns the unlit preview off. These navigation optimizations apply to GPU rendering only. (ARNOLD-18083, ARNOLD-18181, ARNOLD-17770)

A cleaner, sharper image

Arnold Viewport shows a cleaner, sharper image closer to the final result while you navigate and edit the scene. (ARNOLD-18001, ARNOLD-18113, ARNOLD-18197, ARNOLD-18252, ARNOLD-18418, ARNOLD-18401, ARNOLD-18459, ARNOLD-18572, ARNOLD-18608)

CPU rendering

Arnold Viewport can also render on the CPU. Set Render Device to CPU in the settings flyout. A GPU device is still required for the viewport processing stage. Without one, Arnold logs a warning and falls back to a normal render. (ARNOLD-18154, ARNOLD-18214, ARNOLD-17853, ARNOLD-18133)

More responsive interactive rendering

Interactive rendering in the Arnold RenderView and in ActiveShade keeps up when you move the camera or objects quickly. Previously, fast viewport drags could stall the render, and nothing updated until you stopped moving. Now your changes reach Arnold promptly and the image keeps updating while you drag. (MAXTOA-2231)

Pause and resume production renders

The Pause button in the 3ds Max rendering progress dialog now works with Arnold. Pausing holds the render in place, and resuming continues exactly where it left off, keeping all the pixels already rendered. While paused, the progress dialog shows Rendering paused..., and you can still cancel without resuming first. (MAXTOA-2224, ARNOLD-11048)

Shader imager

The new Shader imager runs a shader network on the rendered image, so you can build stylized looks and do slap compositing while you render interactively. Add it from the imagers list in the Arnold RenderView and connect any map network to its Shader slot. The network can read AOVs through OSL shaders or an image node, with filenames such as aov:diffuse and aov:albedo. See Imager Shader in the Arnold documentation. (MAXTOA-2230, MAXTOA-2281, ARNOLD-10321, ARNOLD-18335)

MAXtoA ships a set of example OSL filter shaders, including painterly, film grain, and lens effects. You'll find them in the Material Editor under the OSL > Arnold Shader Imager category. Their source and a README are in the OSL folder of the MAXtoA installation. Start from EXAMPLE_filter.osl to write your own filter. It is heavily commented, and also makes a good example to give a coding assistant.

Edit the imager's map in the Arnold RenderView

When you select a Shader imager in the Post tab of the Arnold RenderView, the rollouts of the map connected to it appear below the imager's own rollouts, titled with the map's name. You can adjust the map, such as one of the example OSL filters, without opening the Material Editor. Arnold shaders and OSL maps are shown in full. Standard 3ds Max maps, such as Bitmap, can't be shown in the Post tab, and a note points you to the Material Editor instead. The panel updates when you swap or disconnect the map, or change an OSL map's code. See Imagers. (MAXTOA-2320, MAXTOA-2323)

Imager presets

The new Presets button in the Imagers rollout (Render Setup > Arnold Renderer tab), and in the Post tab of the Arnold RenderView, opens the Imager Presets dialog. You can pick a ready-made look there, with a preview image and a description for each preset. A preset replaces your imagers and adds the AOVs that its imagers read, on an In Memory driver. MAXtoA ships several imager presets, such as Advanced Toon Setup and Pencil Sketch. They use new example OSL filters, including Raindrops on Glass, Lens Dirt, Sketch Lines, Pencil Tones, and Glitchy CRT / VHS. (MAXTOA-2328, MAXTOA-2343, MAXTOA-2350)

Faster, more predictable imager updates

Imagers, including the Shader imager, update faster and on a predictable schedule during interactive rendering:

AOV Manager improvements

Create custom AOVs in the AOV Manager

You can create the AOVs you need without leaving the AOV Manager or wiring up chains of aov_write shaders by hand. Three new categories sit at the bottom of the AOV list:

Custom and shader AOVs are saved with the scene, support undo, and are included in AOV presets. A shader AOV's map is saved in a separate .ass file next to the preset. See AOVs. (MAXTOA-712)

In Memory AOV driver

The AOV Manager has a new In Memory driver type for AOVs that only feed imagers, for example a Shader imager that reads aov:edge_mask. These AOVs are rendered and appear in the Arnold RenderView, but nothing is written to disk, so they don't need an output path. AOV presets now save each driver's type. Previously, every driver loaded back from a preset as EXR. Loading an AOV preset adds to your existing setup: a driver with the same type and suffix only gains the AOVs it is missing, and custom or shader AOVs whose names are already in use are skipped. (MAXTOA-2325)

Light groups only on AOVs that support them

The Light Group option is disabled, with a tooltip, on AOVs that can't be split by light. This includes data AOVs such as N, P, Z, ID, motion vectors and Cryptomatte, albedos, the background, and shader AOVs. The light group option stays available on lighting AOVs and custom LPE AOVs. (MAXTOA-2344)

Shaders for stylized rendering

MAXtoA 5.9.3.0 added the Shader to RGBA and tone zones shaders for non-photorealistic rendering (NPR). New shaders make it easier to build NPR looks from individual lighting components:

The Specular shader's Specular Weight parameter is called Reflectivity, which better describes what it does: it multiplies the dielectric Fresnel reflectivity without affecting refraction. The old name is still accepted as a synonym, so existing scenes keep working. (ARNOLD-18136)

Render VDB files as volumes, implicit surfaces, or points

The Arnold Volume object has a new Type setting that controls how a VDB file renders. (MAXTOA-1916, MAXTOA-2239)

The grid picker tags each grid as [sdf] or [points] and greys out grids that the current type can't use. A file that contains only points grids opens with Type set to Points. Existing scenes load as Volume, so they render as before.

Arnold Implicit object

The new Implicit object (Create panel > Geometry > Arnold) renders a signed distance field shader as a solid surface. For example, you can use an OSL map that returns the distance to a shape. Connect the shader to the Field map slot, and assign a material to the object as usual to shade the surface. The object's box (Length, Width, Height) sets the bounds of the field, and nothing renders outside it. The Field group also has Solver, Threshold, Samples, and Step Size. See Implicit. (MAXTOA-2304)

Better denoising through glass and in reflections

The Arnold Denoiser (Noice) gives better results for objects seen through transparent surfaces like glass and in reflective surfaces such as mirrors. To take advantage of this change, Noice requires denoise_albedo_noisy and its variance AOV as inputs. This is the same albedo AOV used by the OIDN and OptiX denoisers. (ARNOLD-10252)

Simpler Noice settings

Noice is easier to set up:

Higher-quality OptiX denoising

The OptiX denoiser produces higher-quality denoising results. (ARNOLD-12188)

Faster GPU rendering

GPU rendering is faster both to start and to render:

Scene MAXtoA 5.9.3.0 GPU scene update MAXtoA 5.9.4.0 GPU scene update Speedup
Beeple 3081 ms 790 ms 3.90x
Walrus 107 ms 47 ms 2.27x
ALab 1910 ms 850 ms 2.25x
Sophie 2608 ms 2601 ms 1.00x

GPU memory warnings and stats

On Windows, Arnold warns you when a GPU render is close to exceeding the GPU memory budget provided by the operating system. When GPU memory goes over budget, GPU renders become very slow, followed by possible crashes and hangs. (ARNOLD-17693)

The render stats now report previously unaccounted-for GPU memory as compute stacks. This is the memory that each GPU thread allocates for its computation. It grows with the number of GPU cores, not with scene complexity, and is usually a few GBs. (ARNOLD-17310)

Faster interactive mesh edits

When you edit or deform a mesh during interactive rendering, such as when animating or sculpting, Arnold now processes it faster, on both CPU and GPU. For example: (ARNOLD-17628, ARNOLD-18289, ARNOLD-18321, ARNOLD-18544)

Lightweight instancing

Arnold now renders instances from Arnold instancer nodes through a lightweight instancing system, which was previously available only through USD. Dense instanced scenes, such as scattered vegetation, crowds, and particle duplicates, use less memory and start rendering sooner. (ARNOLD-17947)

Faster motion blur with varying motion keys

Arnold now renders scenes more efficiently when objects have different numbers of motion keys or different motion start and end values. Previously, these differences could cause significant slowdowns. In a test scene with 39k moving objects, render time dropped from 3.76 s to 0.28 s (13.4x faster) when 90% of objects had 5 keys and 10% had 2. Another scene with 30 different motion time ranges and 1–9 keys per object improved from 1.37 s to 0.31 s (4.4x faster). This optimization increases acceleration structure memory usage based on the maximum number of motion keys per object. Performance and memory usage remain unchanged for scenes where objects already use consistent motion keys. (ARNOLD-6597)

Faster scene startup and shutdown

Indirect Light Samples

When Global Light Sampling is enabled (Light Samples above 0), Arnold previously used a single light sample per shading point on indirect bounces. The new Indirect Light Samples setting, in the Global Light Sampling group of the Sampling and Ray Depth rollout, lets you increase the number of indirect light samples to reduce noise in scenes with many lights, at the cost of additional sampling. The default is 1, matching the previous behavior. (ARNOLD-17084)

Frame Time Limit

The new Frame Time Limit setting stops a batch render after about that much time and saves the image reached so far. It is also available in the Flow Render Submitter. This is useful for shots that have to be delivered by a certain time. The time limit can be in seconds, minutes, or hours. The render uses progressive sampling, so the image is complete but noisier than a converged render. The limit is approximate, and the render can run longer if some pixels don't have valid data yet. It is ignored in interactive rendering. The default of 0 means no limit. (ARNOLD-18340)

Roughness AOV

A new built-in roughness AOV reports the surface roughness seen at the first bounce, so you can check roughness maps across a whole shot without building a custom AOV for every material. It is listed with the other built-in AOVs in the AOV Manager. A material with several lobes returns a weighted average across them. Surfaces with no microfacet roughness (pure diffuse, hair, sheen, fuzz, and transmission) return 1. (ARNOLD-17777)

Thanks to Alex Mateo for the use of the Salita scene.

Smaller Cryptomatte manifests

Cryptomatte manifests no longer include entries for matte holdout objects and objects that are invisible to the camera. This can significantly reduce the size of the manifest metadata embedded in EXR files or saved in sidecar manifests. Production scenes could accumulate several megabytes of unusable manifest data, which slowed down downstream tools such as Nuke. (ARNOLD-17983)

More detailed timing stats

Scene creation time now has two subsections: scene setup and scene load. The frame time has a new render setup time, which covers one-time CPU and GPU setup and has a separate GPU context creation subsection. Light-tree building is now included in light-accel building. (ARNOLD-16395)

Scripting support

MAXtoA is easier to drive from MAXScript. (MAXTOA-2287)

Render Setup tooltips from Arnold

Tooltips for many Arnold render settings come from the Arnold core descriptions, which are more up to date, instead of older copies kept in MAXtoA. (MAXTOA-2333)

Detect Arnold from OSL shaders

OSL shaders can call getattribute("renderer:name", ...) and getattribute("renderer:version", ...) to check whether they are running in Arnold, and in which version. This lets you write shaders that use Arnold-specific behavior and still work in other renderers. (ARNOLD-18066)

Render multiple frames with kick

The kick -frame argument supports a semicolon-separated list of frames and ranges when you render a USD file. A range is written start-end and can take an optional step after a comma (start-end,step). For example, -frame 1;3;10-22 renders frames 1, 3, and 10 through 22, and -frame 1-100,2 renders every second frame from 1 to 100. (ARNOLD-9867)

kick -info options lists the options node parameters under headings such as Sampling, System, and Diagnostics. (ARNOLD-15626)

Motion range on matrix_interpolate

The matrix_interpolate node supports motion_start and motion_end parameters. (ARNOLD-17964)

Alembic procedural is built in

The alembic node is included in Arnold and is no longer a separate library in the plugins folder. (ARNOLD-18288)

Updated libraries

Flow Render Enhancements

Texture baking

Both the 3ds Max Bake to Texture and Render to Texture features can render on the Flow Render cloud. Check the checkbox, and render jobs are dispatched to the cloud automatically. (MAXTOA-2176)

Turntable render

The Flow Render Submission dialog has an option to render turntables, for a 360-degree view of your model without manually setting up cameras or lighting. (MAXTOA-2200)

Thanks to Alex Mateo for the use of his Gabi scene.

Multi-frame rendering

The new Frames Per Task setting groups multiple frames into a single task when you submit a render job. This reduces the overhead of cloud worker startup and shutdown, which is especially useful for long sequences or fast-rendering scenes. (ARNOLD-17676)

Custom OCIO configs

Custom OCIO configs are supported when you submit scenes to Flow Render. (ARNOLD-17134)

Faster job submission

Submitting asset-heavy scenes is much faster. Verifying the upload status of thousands of assets takes seconds instead of minutes. (ARNOLD-17637)

Longer jobs and render time limit

Cloud rendering jobs can run for up to 24 hours. (ARNOLD-17948)

The Flow Render Submitter has a Frame Time Limit setting. A frame stops rendering when it reaches the time limit, and writes out the image rendered so far. The result is a complete image that is noisier than a fully rendered one. (ARNOLD-18416)

UDIM tile tokens

The <utile> and <vtile> tokens are supported in texture filenames. (ARNOLD-18206)

USD Enhancements

Up axis in USD exports

The Arnold USD export writes upAxis and metersPerUnit metadata in the USD file. (MAXTOA-2183) usd#2698

Accelerated rendering in Hydra

A new accelerated_rendering render setting provides fast viewport updates (GPU only). usd#2652

Render pause in Hydra

The Arnold render delegate supports pausing. usd#2719

Interactive updates for imager shaders

When an imager shader, or a shading tree connected to it, is modified interactively, only the imager pass is updated instead of the whole render restarting. usd#2758

Mesh geometry deduplication in Hydra

The render delegate finds identical meshes and curves and renders them as instances of one shared node. This reduces memory use and BVH build time in scenes with repeated assets, such as point instancer prototypes. For example, a production Houdini scene with many point instancers and repeated prototypes now uses 15 GB of memory instead of 50 GB. The HDARNOLD_GEOM_DEDUP environment variable sets the mode: 0 (no deduplication), 1 (point instancer prototypes only; the default), or 2 (all duplicate geometry). usd#2749

Turntable tool

A new command-line tool generates turntable scenes from a USD asset. It uses the render settings already in the scene, and an option lets you choose a specific render settings prim. usd#2625 usd#2769

Per-render var EXR compression

EXR compression can be set separately for each render var (AOV) with the arnold:driver_exr:compression attribute. The compression set on the render product is used as a fallback. usd#2742 usd#2731

Points grids in volumes

When a Volume primitive loads a VDB file with points grids, these grids are rendered as points in Arnold. usd#2740

UV camera and UV render vars

The ray_direction and ray_origin inputs of the uv_camera are supported in Hydra, which fixes cage handling when baking textures. usd#2710 UV render vars are also supported. usd#1286

Sequence rendering with Hydra 2 render settings

Sequences render correctly when the render settings change during the sequence. The render is interrupted before the render settings are updated, and existing Arnold nodes are reused instead of being recreated. usd#2754

Other USD improvements

API Changes

Direct outputs API

DCC plugins can build a fast interactive viewport on top of the new direct outputs GPU rendering mode, which is how MAXtoA implements Arnold Viewport. Set the direct_outputs option on the options node to render at a reduced internal resolution and upscale to the final resolution. During the viewport render loop, the render update callback is invoked with the new AI_RENDER_UPDATE_VIEWPORT update type each time fresh output is ready. Each AOV lives on the GPU. Use the new AiGetRenderOutput() function to copy an AOV into a destination selected by AtGetRenderOutputHandleType: OPENGL copies directly into a GL texture through CUDA-GL interop, and CPU copies into a host buffer. The optional AtRenderOutputProperties argument controls how the AOV is written: destination_row_pitch copies into a CPU buffer wider than the render region, half_float converts the AOV to 16-bit half float on the GPU before a CPU transfer, and alpha_mode writes the alpha as is, inverted, or as a constant alpha_value. See ai_render.h. (ARNOLD-17608, ARNOLD-18283, ARNOLD-18284, ARNOLD-18285)

Render pause API

New AiRenderPause() and AiRenderIsPaused() functions let a host pause a running render without losing progress, then resume it with the existing AiRenderResume(). AiRenderGetStatus() continues to report AI_RENDER_STATUS_RENDERING while a render is paused. (ARNOLD-11048)

Imager interrupt and resume APIs

When an imager or a shader under its graph is modified interactively, interrupt the imager passes with AiImagerInterrupt(). This interrupts only the imager passes, not the render itself. Once the imagers and their shaders have been modified, resume them with AiImagerResume(), which replaces the previous request_imager_update render hint. (ARNOLD-11648)

Detect shaders used only by imagers

The new AiShaderInImagerTree() function tells a host application whether a shader is used only by an Imager Shader. The host can call it on each shader edit during an interactive session, because it is fast enough to call every time. If it returns true, the host can make the edit between AiImagerInterrupt() and AiImagerResume() instead of interrupting the render. (ARNOLD-18297)

OSL screen coordinates

OSL shaders evaluated by the Imager Shader can read the screen position of the current pixel, in the 0–1 range. getattribute("screen_uv", ...) has v = 0 at the bottom of the image, matching Arnold's convention and the Imager Shader's Screen UV mode. getattribute("screen_st", ...) has t = 0 at the top of the image, matching OSL's texture convention, so you can pass it to texture() without flipping. Both return screen-space derivatives, so texture() lookups are filtered correctly. See OSL Shaders. (ARNOLD-18419)

Node versioning API

Arnold provides an API for registering and resolving versioned node entries, letting plugins share a logical node_family across multiple node_version variants and look them up without hardcoding raw node names. The API is available in C and Python, and exposes AiNodeEntryGetVersion(), AiNodeEntryLookUpVersion(), AiNodeEntryLookUpLatestVersion(), AiNodeEntryGetFamilyVersions(), and AiNodeEntryGetVersionFamilyIterator(). (ARNOLD-8640, ARNOLD-17959)

Volume grid type API

The new AiVolumeFileGetChannelTypes() function tells you whether a VDB grid is a volume channel or a points grid. (ARNOLD-18209)

Incompatible Changes

AiGetRenderOutput() requires recompiling

Adding the AtRenderOutputProperties argument changed the binary interface of AiGetRenderOutput(). Plugins and applications built against Arnold 7.5.3 that call AiGetRenderOutput() must be recompiled against the 7.5.4 headers. No source changes are needed. Binaries that are not recompiled still load, but their calls to AiGetRenderOutput() may crash or write incorrect data. Plugins and applications that do not call AiGetRenderOutput() are not affected. (ARNOLD-18283)

Light groups ignored on AOVs that can't be split by light

A light group already set on an AOV that can't be split by light, for example in an older scene, is now ignored, and the AOV renders under its plain name. Before, a shader AOV with a light group rendered nothing at all. (MAXTOA-2344)

AOV presets add to your existing setup

Loading an AOV preset adds to your existing AOV setup instead of replacing it. A driver with the same type and suffix only gains the AOVs it is missing, and custom or shader AOVs whose names are already in use are skipped. (MAXTOA-2325)

New Noice filter_strength default

The default Noice filter_strength is now 0.6 (it was 0.45), and the value behaves consistently across rendering filters. If you set filter_strength for a specific filter, check your results. (ARNOLD-18168)

variance_filter width and filter_weights deprecated

Arnold sets the width and filter_weights parameters of the variance_filter automatically. Setting them triggers a deprecation warning, and a future version of Arnold will remove them. (ARNOLD-17982)

Alembic is no longer a separate plugin library

The alembic node is built into Arnold, so there is no longer an Alembic library in the plugins folder. (ARNOLD-18288)

Bug Fixes

System Requirements