Activity 3: Move components

Open Sheet 1, in the Design Manager Browser select Components, and in the Parts Search field, enter C*

In the Results field, Ctrl-Select C228, C222, C229, and C224. The capacitors are highlighted in the drawing. Arrange the drawing so these remain visible.

In the Inspector\Properties of Components fields note the shared Position value of 7.1. This is a Y value that denotes vertical alignment. You can also see this in the Selected Objects table, in the Y1 settings.

In the Properties of Components section change the Position value to 7.2 and press Enter. Note how all four capacitors move upward. Click Undo to reverse this change.

Alternative exercise: Change Angle value to 180, then back to 90.