Reference editor menus

This section describes the menu items and options for the Reference Editor.

• File menu
• Reference Menu
• Proxy Menu
• File Particulars

File menu

Create Reference

See Reference Options and Create file references.

Import Objects from Reference

Imports the selected reference’s objects directly into the current scene. See Import file references.

Export Selection

Exports the selected objects as a reference and links that reference into the current scene. You can set options here (see File > Export Selection). A file browser opens to save the file with the name and location you specify.

Save Reference Edits

Saves edits that were made within the parent scene for a selected file reference to the corresponding referenced file on disk. The edits get transferred so they no longer reside within the parent scene. See Reference edits.

Export to Offline File

Exports changes made to objects in a scene (i.e. connected nodes) to a file you specify. You can then apply these edits to other scenes with the Assign Offline File option. See Export to an offline file.

General Options

File type

Sets the file type to editMB or editMA. The default is editMA.

Default file extensions

Adds the file extension .ma to Maya ASCII filenames and .mb to Maya Binary filenames.

Target Options

Export nodes

Sets which scene objects’ edits to export. Selected objects exports all selected objects’ edits. Referenced file exports edits for all references selected in the Reference Editor.

Include Options

Sets the types of edits to include in the export.

Reference Options

Include setAttr edits

Exports edits made to setAttr attributes.

File Type Specific Options

Use full names for attributes on nodes

Displays the full names of node attributes.

Assign Offline File

References the edits from the file you select and applies them to the reference node selected in the Reference Editor. Maya applies edits by matching each nodename.attribute in the edit file to the file its being applied to.

For example, you can export a reference edit for pSphere1.translateX in the scene sphere.ma. This edit is saved in the reference file as <main>:sphere_pSphere1.translateX. You can then apply this edit to the scene ball.ma so that ball:pSphere1.translateX is edited. See Assign an offline file

General Options

Apply via

Allows you to apply edits as either a referenced edit or import the edit straight into your scene. Imported edits are baked into the main scene and cannot be unloaded like referenced edits.

File type

Select from the drop-down list the file type you are importing. If you aren’t sure what type of file you are applying, you can select Best Guess.

Depending on the file type you select, various file type specific options may be displayed.

Namespace Options

Use namespaces

When you reference or import a scene with Use namespaces on, Maya creates a new namespace that contains the referenced data. Turning on Use namespaces ensures that all nodes are uniquely named. See Namespaces and Create namespaces when referencing or importing.

Tip:

Before referencing a file, make sure that the renaming prefix contains no invalid characters.

The currently set namespace is indicated in the Namespace Options section by the icon. Namespaces that are parents of the currently set namespace are indicated by an icon. You can set the current namespace in the Namespace Editor by clicking Set Current. See Namespace Editor Overview and Edit namespaces.

Namespaces do not effect selection, the DAG, the Dependency Graph, or any other aspect of Maya.

Use selected namespace as parent and add new namespace (file name)

Specifies that the referenced file name is added to the beginning of object namespace.

For example, if you are referencing or importing a scene named foo.ma that contains an object named ball, its namespace is foo:ball.

Use selected namespace as parent and add new namespace string:

Specifies that a text string is added to the beginning of the object namespace. Type the string in the field that appears.

Merge into selected namespace and rename incoming objects that match

Merges the object's namespace wih an existing, selected namespace.

If duplicate namespaces occur, the namespaces are merged and duplicate object names are incrementally suffixed with a number. Use this option to avoid an accumulation of new namespaces each time your referenced or imported objects have the same namespace.

Node Name Substitutions

Lets you perform text substitutions on the offline edits file as it is applied to the scene. One or more sets of replacement text can be specified and are applied to the file in the order that they appear in the list.

For example, if you wanted to replace all the edits applied to an object named sphere1 and apply them instead to an object named sphere2 , you would type sphere1 in the Search for field and sphere2 in the Replace with field, and click Add.

Search for

Type the node name you want to search for and click Add. The node name is added to the list area. To remove the node name, select it in the list area and click Remove.

Replace with

Type the node name you want to use as a substitute, then click Add. The node substitution rule is added to the list. To remove the substitution from the list, select it, then click Remove.

File Type Specific Options

Use full names for attributes on nodes

Displays the full names of node attributes.

List Reference Edits

Displays a current list of edits on the selected reference. You can refresh this window manually by clicking the Refresh Edits List button or remove specific edits by selecting them and clicking Remove Selected Edits. See List copy or remove reference edits.

List Unknown Edits

When you reference a file from Maya 6.5 or earlier, some edits may not be recognized by the conversion process. These unknown edits are listed here. You can refresh this window manually by clicking the Refresh Edits List button or remove specific edits by selecting them and clicking Remove Selected Edits.

Clean Up Reference

Removes all edits from the target reference node.

Note:

Using Clean Up Reference should be done only if you are certain that you will no longer require the edits it will remove. Using Clean Up Reference on a loaded reference removes all edits which could not be applied. Using Clean Up Reference on an unloaded reference will remove all edits, whether they could be applied or not, and so should be used with care to avoid unwanted data loss.

Select File Contents

Selects all items in the selected reference file.

Reference Menu

Reload Reference/Unload Reference

Loads or unloads the selected reference. If the current reference is already loaded, reload updates the loaded reference. This is useful when the reference file is being edited simultaneously. See Unload and reload file references.

Load Related Reference/Unload Related Reference

Loads or unloads references related to selected objects.

For example, if you want to unload an object and the reference to which it belongs without having to open the Reference Editor and figure out which reference should be unloaded, you can simply -click the object and choose Unload Related Reference. As well, you can select a locator or annotation, and then load its related references (you must select both the locator/annotation and the foster parent node for this to work).

Duplicate Reference

Duplicates the file associated with the selected reference. See Duplicate file references.

Replace Reference

Opens a file browser to replace the current reference with the one you select. The group node and/or locator remains the same.

Recently Replaced Files

Lists recently-replaced reference files.

Remove Reference

Removes the selected reference and associated reference nodes from the scene file. This is the preferred method for removing a reference and its associated nodes.

Lock Reference/Unlock Reference

Locks or unlocks all of the nodes and attributes for a selected file reference. A lock icon appears beside the listed file reference within the Reference Editor to indicate the locked status. See Locking a file reference.

Proxy Menu

Add Proxy >

Adds a proxy reference to the currently selected file reference. When you select Proxy > Add Proxy > you can specify the file type to add and set the Proxy Tag Options within the Proxy Options window that appears.

Note:

The Proxy Options menu items are also available from the context sensitive menu in the Reference Editor. To display this menu, select a file reference and -click the item.

If a proxy reference does not exist for the file reference, a proxy set is created for the proxy references for that file reference. If a proxy reference exists, the new proxy becomes a member of the existing proxy set for that reference.

When a proxy reference is created, the listed file reference updates to display a icon to indicate that one or more proxy references exist for that reference.

General Options

File type

Select the file format you want to use as a default for the next time you add a proxy reference. If you have a project set up, when you open a scene, the browser points to the directory containing files of that type. On Windows and Mac OS X, it also sets the filter to display only files of the selected type.

Proxy Options

Shared Edits

Edits made to the proxy in the scene automatically update the proxy’s source file.

Set proxy tag to

Type the text string for the proxy tag you want applied to the proxy reference or select an existing tag from the list in the drop-down menu. When a proxy tag appears in gray in this list, it indicates that the tag is already in use for this specific file reference. The proxy tag appears in the Reference Editor.

After you create a proxy tag, it will become available for selection within the Proxy Tag Options drop-down menu in both the Proxy Options and Reference Options windows.

Proxy tags must be unique within a given proxy set. That is, a proxy tag will be available for a proxy set provided it is not already in use within the same proxy set. You can create your own tags and reuse them in different proxy sets.

File Type Specific Options

Depending on the File Type you select, various File Type Specific Options are displayed here. See Open Options.

Remove Proxy

Removes the proxy reference that is selected from the list of proxy tags that appears within the Remove Proxy submenu.

The list of available proxy references is displayed in the menu based on their proxy tags. The list of proxy tags is generated from all of the proxy tags currently in use within the proxy sets selected. When a proxy tag appears in gray, it indicates that it is currently loaded.

When a proxy reference is removed from a proxy set, and only a single file reference remains, the proxy set is removed and the reference returns to a normal reference state. In the Reference Editor, the icon is removed from the listed file reference, and the listed name of the file reference is updated.

Note:

It is not possible to remove a loaded proxy. To remove the currently loaded proxy you must first reload any other proxy reference from the list so that the proxy you want to remove becomes available within the list for removal.

Reload Proxy As

Loads the proxy reference that is selected from the list of proxy tags that appears within the Reload Proxy As submenu. The list of proxy tags is generated from all of the proxy tags currently in use for the proxy sets selected. When a proxy tag appears in gray, it indicates that it is currently loaded.

Reload Proxy As is used to switch between proxy references for a given file reference. The list of available proxy references is displayed in the menu based on their proxy tags. When a proxy tag appears in gray, it indicates that it is currently loaded.

Note:

A proxy for a specific proxy set is only reloaded when the selected proxy tag matches one of the available tags for that set. For example, if multiple proxy sets are selected and the high proxy tag is chosen for reload, only those proxy references that have the high tag will be reloaded. Any proxy set that does not include the high tag will remain unchanged.

Export Proxy Asset >

Exports a proxy asset for the selected asset (referenced or non-referenced). For more information about proxy assets, see Proxy assets.

For proxy asset options, see Assets > Export Proxy Asset.

Switch tag for Active Proxy to

Allows you to change the Proxy Tag of the active Proxy. You can either select from a list of all Proxy Tags in the scene, or define a new one (Define New). When selecting from the list of pre-existing Proxy Tags those tags that are used in the currently active proxy set are grayed out.

Switch Tag for Proxy

Allows you to change the Proxy Tag of any proxy in the currently selected proxy set.

View menu

View Selected References

Displays only the selected references.

Selecting this option also creates a new Reference View Set, which can be found in the View menu. This Reference View Set acts as a bookmark; selecting the created Reference View Set in the future filters the references in the Reference Editor and only displays the references that were selected when the Reference View Set was created.

See Reference View Sets.

View All Reference

Displays all of the references in the current scene.

File Particulars

The following file information displays when a referenced file is selected in the Reference Editor. You can select to show or hide this information by clicking on the disclosure triangle.

Unresolved Name

Displays a relative or absolute path including name of the referenced file, without locations where Maya searches for the file.

Resolved Name

Displays the filename and path where Maya found the file.

Namespace

Displays the current namespace for the selected file reference. The namespace for a file reference can be edited within the text field. (This field appears when Use Namespaces is turned on.)

Note:

• The file reference must have been created using the namespaces option for its namespace to be editable. That is, you cannot edit references that were created using the older file renaming prefix convention.
• A namespace cannot be edited if the file reference is unloaded.
• The new namespace you enter cannot already exist.
• The namespace for a reference can only be edited for references that are made from the currently open scene. That is, you cannot edit namespaces for references that are nested within other file references.

Rename Prefix

Displays a prefix that can be applied to object names in the event of name clashes. (This field appears when Use Namespaces is turned on.)