To import a model

When you start Print Studio, the first workflow step is Import. Currently, you can import these mesh file formats: 3MF, OBJ, and STL. These file formats don't store information about the model's original unit of measurement (Millimeter, Centimeter, or Inch). So when imported, Print Studio applies its own Units setting to the model. So, for example, even if a model was designed to be 4 inches, if Print Studio's current Units setting is Millimeter, the model is imported as 4 millimeters.

Tip: If you know the model's original unit of measurement, before importing, choose File > Preferences. Then under Units, select the appropriate Length option to match.

1. Import one or more models using one of these methods.

   You can import more than one model at the same time, as long as they can all fit on the build surface.

   • On the Prep bar, click Import.

     

   • Drag a model into Print Studio.
   • Choose File > Import.

   Each imported model is selected and centered on the build surface.

   The Prep bar advances to the Layout workflow step. Here you can arrange and scale imported models.

2. Depending on the model's size, you may be prompted to make it larger or smaller. If the model is too large for the build volume, click Scale to Fit. If the model is too small, consider changing the unit of measurement.
Important: If the imported model is translucent, that means a portion of the model is outside the build volume (the printable space for the selected printer). Move the model back into the build volume to fix the issue. If the imported model is shaded red, that means the model has some errors. Not to worry though. These errors can usually be fixed in the Repair workflow step.
3. If desired, repeat these steps to import more models.
Tip: If an imported model consists of more than one part, right-click the model and choose Separate All to work with the individual parts.

If you accidentally import the wrong model, delete it and try again. You can delete items a couple ways. Select the desired item in the Object Browser, press Delete. You can also right-click an item and choose Delete.