This tool creates a group of four single axes with identical distance. The alignment is independent of the coordinate system but the group is created in the X/Y plane of the active UCS.
You can create the axis group by defining the start point and the end point of the first single axis (the group width). A third point determines the axis group direction relative to the start point and its length.
To access the command
On the Objects tab 
Grid panel, click
(Grid with 4 axes).
Command line: _AstM4CommGridAxes
To create a group of 4 axes
- Set a suitable coordinate system.
- On the Objects tab Grid panel, click
(Grid with 4 axes).
- Specify the start point of the first grid line.
- Specify the end point of the first grid line. The two points define the group width.
- Specify a third point to define the group length and direction.
- The axis group is inserted. The properties dialog box appears.