If you have the Hydraflow extensions installed, you can launch them from the Autodesk Civil 3D ribbon or command line.
Note: Autodesk Civil 3D must be running in order to start the Hydraflow extensions. Once the Hydraflow extension is launched, you can terminate Autodesk Civil 3D if desired.
The extensions are typically installed by default when you install Autodesk Civil 3D. If you chose not to install them when you first installed Autodesk Civil 3D, they can be installed later using Add or Remove Programs from the Control Panel.
To launch Hydraflow Express
- Do one of the following:
- Click the tab
panel Find. - On the Pipe Networks contextual tab, click the Launch Pad
. - At the command line, enter .
- Click the tab
To launch Hydraflow Hydrographs
- Do one of the following:
- Click the tab panel Find.
- On the Pipe Networks contextual tab, click the Launch Pad
. - At the command line, enter .
- Click the tab
To launch Hydraflow Storm Sewers
- Do one of the following:
- Click the tab panel Find.
- On the Pipe Networks contextual tab, click the Launch Pad Storm Sewers
. - At the command line, enter .
- Click the tab
You can also launch the Storm Sewers Extension using the EditInStormSewers command.