|
ACRA 2100-V*.PST |
Sample Config file for Acra controls. Cutter diameter compensation is supported. Uses M6 for tool change. Multiple work offsets (G54,G55,..) are supported. Face XY is supported. Face Polygon is supported. Face diameter index is supported. Face Cylinder is supported. Face 4-axis is supported. |
|
DAEWOO-V*.PST |
Sample Config file for a Daewoo machine. Cutter diameter compensation is supported. Uses M6 for tool change. Multiple work offsets (G54,G55,..) are supported. Face XY is supported. Face Polygon is supported. Face diameter index is supported. Face Cylinder is supported. Face 4-axis is supported. |
|
DYNA_DELTA10-V*.PST |
Sample Config file for Dynapath machines. Cutter diameter compensation is supported. Multiple work offsets (G54,G55,..) are supported. Face XY is supported. Face Polygon is supported. Face diameter index is supported. Face 4-axis is supported. |
|
FADAL_4525-V*.PST |
Sample Config file for Fadal machines. Cutter diameter compensation is supported. Multiple work offsets (G54,G55,..) are supported. Face XY is supported. Face Polygon is supported. Face diameter index is supported. Face 4-axis is supported. |
|
HAAS_4_AXIS-V*.PST |
Sample Config file for a Haas machine. Cutter diameter compensation is supported. Uses M6 for tool change. Multiple work offsets (G54,G55,..) are supported. Face XY is supported. Face Polygon is supported. Face diameter index is supported. Face Cylinder is supported. Face 4-axis is supported. |
|
HARDINGE_GX-480-V*.PST |
Sample Config file for a Hardinge machine. Cutter diameter compensation is supported. Uses M6 for tool change. Multiple work offsets (G54,G55,..) are supported. Face XY is supported. Face Polygon is supported. Face diameter index is supported. Face Cylinder is supported. Face 4-axis is supported. |
|
OKUMA_OSP_E100L-v*.PST |
Sample Config file for a Okuma machine. Cutter diameter compensation is supported. Uses M6 for tool change. Multiple work offsets (G54,G55,..) are supported. Face XY is supported. Face Polygon is supported. Face diameter index is supported. Face Cylinder is supported. Face 4-axis is supported. |
|
TOYODA_FA450-V*.PST |
Sample Config file for a Toyoda machine. Cutter diameter compensation is supported. Uses M6 for tool change. Multiple work offsets (G54,G55,..) are supported. Face XY is supported. Face Polygon is supported. Face diameter index is supported. Face Cylinder is supported. Face 4-axis is supported. |