- Click Inspect tab
Analysis panel Curvature 
. - (Optional) Under Definition, enter a custom name for the analysis.
- Specify the appearance of analysis results along each curve and edge of the selected geometry:
- Comb Density
. Specifies the spacing between spines. - Comb Scale
. Specifies the scale (length) of the spines. - Surface Density
. Specifies the density of the sample curves for the interior faces. A higher density means there are more curve sample locations along the surface.
- Comb Density
- Under Selection, specify the geometry you want to analyze and, if necessary, select that geometry in the graphics window:
- Faces. Lets you select faces in a solid or surface body.
- Quilts. Lets you select surface features and faces.
- Groups. (Construction environment only.) Selects faces in the selected construction groups.
- Wires. (Construction environment only.) Selects imported wires.
- Set the Direction of the curvature comb display: Direction1
, Direction2 
, or both. - Click OK to analyze. Or, click Apply to analyze and keep the dialog box open, and then continue to change settings and revise the analysis as needed.